I added the history mode configuration in eth/ethconfig initially, since
it seemed like the logical place. But it turns out we need access to the
intended pruning setting at a deeper level, and it actually needs to be
integrated with the blockchain startup procedure.
With this change applied, if a node previously had its history pruned,
and is subsequently restarted **without** the `--history.chain
postmerge` flag, the `BlockChain` initialization code will now verify
the freezer tail against the known pruning point of the predefined
network and will restore pruning status. Note that this logic is quite
restrictive, we allow non-zero tail only for known networks, and only
for the specific pruning point that is defined.
As of now, Geth disconnects peers only on protocol error or timeout,
meaning once connection slots are filled, the peerset is largely fixed.
As mentioned in https://github.com/ethereum/go-ethereum/issues/31321,
Geth should occasionally disconnect peers to ensure some churn.
What/when to disconnect could depend on:
- the state of geth (e.g. sync or not)
- current number of peers
- peer level metrics
This PR adds a very slow churn using a random drop.
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
before this changes, this will result in numerous test failures:
```
> go test -run=Eth2AssembleBlock -c
> stress ./catalyst.test
```
The reason is that after creating/inserting the test chain, there is a
race between the txpool head reset and the promotion of txs added from
tests.
Ensuring that the txpool state is up to date with the head of the chain
before proceeding fixes these flaky tests.
Fixes#31169
The TestTransactionForgotten test was flaky due to real time
dependencies. This PR:
- Replaces real time with mock clock for deterministic timing control
- Adds precise state checks at timeout boundaries
- Verifies underpriced cache states and cleanup
- Improves test reliability by controlling transaction timestamps
- Adds checks for transaction re-enqueueing behavior
The changes ensure consistent test behavior without timing-related
flakiness.
---------
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
This pull request introduces two constraints in the blobPool:
(a) If the sender has a pending authorization or delegation, only one
in-flight
executable transaction can be cached.
(b) If the authority address in a SetCode transaction is already
reserved by
the blobPool, the transaction will be rejected.
These constraints mitigate an attack where an attacker spams the pool
with
numerous blob transactions, evicts other transactions, and then cancels
all
pending blob transactions by draining the sender’s funds if they have a
delegation.
Note, because there is no exclusive lock held between different subpools
when processing transactions, it's totally possible the SetCode
transaction
and blob transactions with conflict sender and authorities are accepted
simultaneously. I think it's acceptable as it's very hard to be
exploited.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
This pull request introduces new sync logic for pruning mode. The downloader will now skip
insertion of block bodies and receipts before the configured history cutoff point.
Originally, in snap sync, the header chain and other components (bodies and receipts) were
inserted separately. However, in Proof-of-Stake, this separation is unnecessary since the
sync target is already verified by the CL.
To simplify the process, this pull request modifies `InsertReceiptChain` to insert headers
along with block bodies and receipts together. Besides, `InsertReceiptChain` doesn't have
the notion of reorg, as the common ancestor is always be found before the sync and extra
side chain is truncated at the beginning if they fall in the ancient store. The stale
canonical chain flags will always be rewritten by the new chain. Explicit reorg logic is
no longer required in `InsertReceiptChain`.
This is an alternative to #31309
With eth/68, transaction announcement must have transaction type and
size. So in announceTransactions, we need to query the transaction from
transaction pool with its hash. This creates overhead in case of blob
transaction which needs to load data from billy and RLP decode. This
commit creates a lightweight lookup from transaction hash to transaction
size and a function GetMetadata to query transaction type and
transaction size given the transaction hash.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR adds `rawdb.SafeDeleteRange` and uses it for range deletion in
`core/filtermaps`. This includes deleting the old bloombits database,
resetting the log index database and removing index data for unindexed
tail epochs (which previously weren't properly implemented for the
fallback case).
`SafeDeleteRange` either calls `ethdb.DeleteRange` if the node uses the
new path based state scheme or uses an iterator based fallback method
that safely skips trie nodes in the range if the old hash based state
scheme is used. Note that `ethdb.DeleteRange` also has its own iterator
based fallback implementation in `ethdb/leveldb`. If a path based state
scheme is used and the backing db is pebble (as it is on the majority of
new nodes) then `rawdb.SafeDeleteRange` uses the fast native range
delete.
Also note that `rawdb.SafeDeleteRange` has different semantics from
`ethdb.DeleteRange`, it does not automatically return if the operation
takes a long time. Instead it receives a `stopCallback` that can
interrupt the process if necessary. This is because in the safe mode
potentially a lot of entries are iterated without being deleted (this is
definitely the case when deleting the old bloombits database which has a
single byte prefix) and therefore restarting the process every time a
fixed number of entries have been iterated would result in a quadratic
run time in the number of skipped entries.
When running in safe mode, unindexing an epoch takes about a second,
removing bloombits takes around 10s while resetting a full log index
might take a few minutes. If a range delete operation takes a
significant amount of time then log messages are printed. Also, any
range delete operation can be interrupted by shutdown (tail uinindexing
can also be interrupted by head indexing, similarly to how tail indexing
works). If the last unindexed epoch might have "dirty" index data left
then the indexed map range points to the first valid epoch and
`cleanedEpochsBefore` points to the previous, potentially dirty one. At
startup it is always assumed that the epoch before the first fully
indexed one might be dirty. New tail maps are never rendered and also no
further maps are unindexed before the previous unindexing is properly
cleaned up.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR adds an extra condition to the log indexer initialization in
order to avoid initializing with block 0 as target head. Previously this
caused the indexer to initialize without a checkpoint. Later, when the
real chain head was set, it indexed the entire history, then unindexed
most of it if only the recent history was supposed to be indexed. Now
the init only happens when there is an actual synced chain head and
therefore the index is initialized at the most recent checkpoint and
only the last year is indexed according to the default parameters.
During checkpoint initialization the best available checkpoint is also
checked against the history cutoff point and fails if the indexing would
have to start from a block older than the cutoff. If initialization
fails then the indexer reverts to unindexed mode instead of retrying
because the the failure conditions cannot be expected to recover later.
This pull request fixes a broken unit test
```
=== CONT TestTracingWithOverrides
api_test.go:1012: result: {"gas":21167,"failed":false,"returnValue":"0x0000000000000000000000000000000000000000000000000000000000000002","structLogs":[{"pc":0,"op":"PUSH1","gas":24978860,"gasCost":3,"depth":1,"stack":[]},{"pc":2,"op":"CALLDATALOAD","gas":24978857,"gasCost":3,"depth":1,"stack":["0x0"]},{"pc":3,"op":"PUSH1","gas":24978854,"gasCost":3,"depth":1,"stack":["0x1"]},{"pc":5,"op":"ADD","gas":24978851,"gasCost":3,"depth":1,"stack":["0x1","0x1"]},{"pc":6,"op":"PUSH1","gas":24978848,"gasCost":3,"depth":1,"stack":["0x2"]},{"pc":8,"op":"MSTORE","gas":24978845,"gasCost":6,"depth":1,"stack":["0x2","0x0"]},{"pc":9,"op":"PUSH1","gas":24978839,"gasCost":3,"depth":1,"stack":[]},{"pc":11,"op":"PUSH1","gas":24978836,"gasCost":3,"depth":1,"stack":["0x20"]},{"pc":13,"op":"RETURN","gas":24978833,"gasCost":0,"depth":1,"stack":["0x20","0x0"]}]}
api_test.go:1013: test 10, result mismatch, have
{21167 false 0x0000000000000000000000000000000000000000000000000000000000000002}
, want
{21167 false 0000000000000000000000000000000000000000000000000000000000000002}
api_test.go:1012: result: {"gas":25664,"failed":false,"returnValue":"0x000000000000000000000000c6e93f4c1920eaeaa1e699f76a7a8c18e3056074","structLogs":[]}
api_test.go:1013: test 11, result mismatch, have
{25664 false 0x000000000000000000000000c6e93f4c1920eaeaa1e699f76a7a8c18e3056074}
, want
{25664 false 000000000000000000000000c6e93f4c1920eaeaa1e699f76a7a8c18e3056074}
```
This is a **breaking change** to the opcode tracer. The top-level
`returnValue` field of a trace will be now hex-encoded. If the return
data is empty, this field will contain "0x".
Fixes#31196
Currently, when answering GetPooledTransaction request, txpool.Get() is
used. When the requested hash is blob transaction, blobpool.Get() is
called. This function loads the RLP-encoded transaction from limbo then
decodes and returns. Later, in answerGetPooledTransactions, we need to
RLP encode again. This decode then encode is wasteful. This commit adds
GetRLP to transaction pool interface so that answerGetPooledTransactions
can use the RLP-encoded from limbo directly.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
this adds 2 features to improve `geth --dev` experience.
1. we don't need to use `dev_SetFeeRecipient` to set initial coinbase
address. it was a pain.
2. we don't need to unlock keystore if we don't use it. we had it
because of clique.
This pull request enhances the unit test, avoiding unnecessary failure
in CI.
```
--- FAIL: TestSimulatedBeaconSendWithdrawals (12.08s)
simulated_beacon_test.go:139: timed out without including all withdrawals/txs
FAIL
```
Here I am adding a config option and geth flag (`--history.chain`) for
configuring history pruning. There are two options available:
- `--history.chain all` is the default and will keep all history like
before.
- `--history.chain postmerge` will configure the history cutoff point to
the merge block.
The option doesn't actually do anything right now, but we need it as a
precursor for other history pruning changes.
This ensures that if we receive a blob transaction announcement where we cannot
link the tx to the sidecar commitments, we will drop the sending peer. This check
is added in the protocol handler for the PooledTransactions message.
Tests for this have also been added in the cross-client "eth" protocol test suite.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
In transaction-sending APIs such as `eth_sendRawTransaction`, a submitted transaction
failing the configured txpool validation rules (i.e. fee too low) would cause an error to be
returned, even though the transaction was successfully added into the locals tracker.
Once added there, the transaction may even be included into the chain at a later time,
when fee market conditions change.
This change improves on this by performing the validation in the locals tracker, basically
skipping some of the validation rules for local transactions. We still try to add the tx to the
main pool immediately, but an error will only be returned for transactions which are
fundamentally invalid.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
I ran into this while trying to debug a discv5 thing. I tried to disable
DNS discovery using `--discovery.dns=false`, which doesn't work.
Annoyingly, geth started anyway and discarded the error silently. I
eventually found my mistake, but it took way longer than it should have.
Also including a small change to the error message for invalid DNS URLs
here. The user actually needs to see the URL to make sense of the error.
This PR does a few things including:
- Remove `ContractRef` interface
- Remove `vm.AccountRef` which implements `ContractRef` interface
- Maintain the `jumpDests` struct in EVM for sharing between call frames
- Simplify the delegateCall context initialization
Currently, when calculating block's bloom, we loop through all the
receipt logs to calculate the hash value. However, normally, after going
through applyTransaction, the receipt's bloom is already calculated
based on the receipt log, so the block's bloom can be calculated by just
ORing these receipt's blooms.
```
goos: darwin
goarch: arm64
pkg: github.com/ethereum/go-ethereum/core/types
cpu: Apple M1 Pro
BenchmarkCreateBloom
BenchmarkCreateBloom/small
BenchmarkCreateBloom/small-10 810922 1481 ns/op 104 B/op 5 allocs/op
BenchmarkCreateBloom/large
BenchmarkCreateBloom/large-10 8173 143764 ns/op 9614 B/op 401 allocs/op
BenchmarkCreateBloom/small-mergebloom
BenchmarkCreateBloom/small-mergebloom-10 5178918 232.0 ns/op 0 B/op 0 allocs/op
BenchmarkCreateBloom/large-mergebloom
BenchmarkCreateBloom/large-mergebloom-10 54110 22207 ns/op 0 B/op 0 allocs/op
```
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
This removes the method `TestingTTDBlock` introduced by #30744. It was
added to make the beacon consensus engine aware of the merge block in
tests without relying on the total difficulty. However, tracking the
merge block this way is very annoying. We usually configure forks in the
`ChainConfig`, but the method is on the consensus engine, which isn't
always created in the same place. By sidestepping the `ChainConfig` we
don't get the usual fork-order checking, so it's possible to enable the
merge before the London fork, for example. This in turn can lead to very
hard-to-debug outputs and validation errors.
So here I'm changing the consensus engine to check the
`MergeNetsplitBlock` instead. Alternatively, we assume a network is
merged if it has a `TerminalTotalDifficulty` of zero, which is a very
common configuration in tests.
Here we add some more changes for live tracing API v1.1:
- Hook `OnSystemCallStartV2` was introduced with `VMContext` as parameter.
- Hook `OnBlockHashRead` was introduced.
- `GetCodeHash` was added to the state interface
- The new `WrapWithJournal` construction helps with tracking EVM reverts in the tracer.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR changes the signature of `CalcExcessBlobGas` to take in just
the header timestamp instead of the whole object. It also adds a sanity
check for the parent->child block order to `VerifyEIP4844Header`.
A clarification was made to EIP-7691 stating that at the fork boundary
it is required to use the target blob count associated with the head
block, rather than the parent as implemented here.
See for more: https://github.com/ethereum/EIPs/pull/9249
Replaces #29297, descendant from #27535
---------
This PR removes `locals` as a concept from transaction pools. Therefore,
the pool now acts as very a good simulation/approximation of how our
peers' pools behave. What this PR does instead, is implement a
locals-tracker, which basically is a little thing which, from time to
time, asks the pool "did you forget this transaction?". If it did, the
tracker resubmits it.
If the txpool _had_ forgotten it, chances are that the peers had also
forgotten it. It will be propagated again.
Doing this change means that we can simplify the pool internals, quite a
lot.
### The semantics of `local`
Historically, there has been two features, or usecases, that has been
combined into the concept of `locals`.
1. "I want my local node to remember this transaction indefinitely, and
resubmit to the network occasionally"
2. "I want this (valid) transaction included to be top-prio for my
miner"
This PR splits these features up, let's call it `1: local` and `2:
prio`. The `prio` is not actually individual transaction, but rather a
set of `address`es to prioritize.
The attribute `local` means it will be tracked, and `prio` means it will
be prioritized by miner.
For `local`: anything transaction received via the RPC is marked as
`local`, and tracked by the tracker.
For `prio`: any transactions from this sender is included first, when
building a block. The existing commandline-flag `--txpool.locals` sets
the set of `prio` addresses.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR defines the Osaka fork. An easy first step to start our work on
the next hardfork
(This is needed for EOF testing as well)
---------
Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com>
