This PR adds an extra condition to the log indexer initialization in
order to avoid initializing with block 0 as target head. Previously this
caused the indexer to initialize without a checkpoint. Later, when the
real chain head was set, it indexed the entire history, then unindexed
most of it if only the recent history was supposed to be indexed. Now
the init only happens when there is an actual synced chain head and
therefore the index is initialized at the most recent checkpoint and
only the last year is indexed according to the default parameters.
During checkpoint initialization the best available checkpoint is also
checked against the history cutoff point and fails if the indexing would
have to start from a block older than the cutoff. If initialization
fails then the indexer reverts to unindexed mode instead of retrying
because the the failure conditions cannot be expected to recover later.
This pull request fixes a broken unit test
```
=== CONT TestTracingWithOverrides
api_test.go:1012: result: {"gas":21167,"failed":false,"returnValue":"0x0000000000000000000000000000000000000000000000000000000000000002","structLogs":[{"pc":0,"op":"PUSH1","gas":24978860,"gasCost":3,"depth":1,"stack":[]},{"pc":2,"op":"CALLDATALOAD","gas":24978857,"gasCost":3,"depth":1,"stack":["0x0"]},{"pc":3,"op":"PUSH1","gas":24978854,"gasCost":3,"depth":1,"stack":["0x1"]},{"pc":5,"op":"ADD","gas":24978851,"gasCost":3,"depth":1,"stack":["0x1","0x1"]},{"pc":6,"op":"PUSH1","gas":24978848,"gasCost":3,"depth":1,"stack":["0x2"]},{"pc":8,"op":"MSTORE","gas":24978845,"gasCost":6,"depth":1,"stack":["0x2","0x0"]},{"pc":9,"op":"PUSH1","gas":24978839,"gasCost":3,"depth":1,"stack":[]},{"pc":11,"op":"PUSH1","gas":24978836,"gasCost":3,"depth":1,"stack":["0x20"]},{"pc":13,"op":"RETURN","gas":24978833,"gasCost":0,"depth":1,"stack":["0x20","0x0"]}]}
api_test.go:1013: test 10, result mismatch, have
{21167 false 0x0000000000000000000000000000000000000000000000000000000000000002}
, want
{21167 false 0000000000000000000000000000000000000000000000000000000000000002}
api_test.go:1012: result: {"gas":25664,"failed":false,"returnValue":"0x000000000000000000000000c6e93f4c1920eaeaa1e699f76a7a8c18e3056074","structLogs":[]}
api_test.go:1013: test 11, result mismatch, have
{25664 false 0x000000000000000000000000c6e93f4c1920eaeaa1e699f76a7a8c18e3056074}
, want
{25664 false 000000000000000000000000c6e93f4c1920eaeaa1e699f76a7a8c18e3056074}
```
This is a **breaking change** to the opcode tracer. The top-level
`returnValue` field of a trace will be now hex-encoded. If the return
data is empty, this field will contain "0x".
Fixes#31196
Currently, when answering GetPooledTransaction request, txpool.Get() is
used. When the requested hash is blob transaction, blobpool.Get() is
called. This function loads the RLP-encoded transaction from limbo then
decodes and returns. Later, in answerGetPooledTransactions, we need to
RLP encode again. This decode then encode is wasteful. This commit adds
GetRLP to transaction pool interface so that answerGetPooledTransactions
can use the RLP-encoded from limbo directly.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
this adds 2 features to improve `geth --dev` experience.
1. we don't need to use `dev_SetFeeRecipient` to set initial coinbase
address. it was a pain.
2. we don't need to unlock keystore if we don't use it. we had it
because of clique.
This pull request enhances the unit test, avoiding unnecessary failure
in CI.
```
--- FAIL: TestSimulatedBeaconSendWithdrawals (12.08s)
simulated_beacon_test.go:139: timed out without including all withdrawals/txs
FAIL
```
Here I am adding a config option and geth flag (`--history.chain`) for
configuring history pruning. There are two options available:
- `--history.chain all` is the default and will keep all history like
before.
- `--history.chain postmerge` will configure the history cutoff point to
the merge block.
The option doesn't actually do anything right now, but we need it as a
precursor for other history pruning changes.
This ensures that if we receive a blob transaction announcement where we cannot
link the tx to the sidecar commitments, we will drop the sending peer. This check
is added in the protocol handler for the PooledTransactions message.
Tests for this have also been added in the cross-client "eth" protocol test suite.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
In transaction-sending APIs such as `eth_sendRawTransaction`, a submitted transaction
failing the configured txpool validation rules (i.e. fee too low) would cause an error to be
returned, even though the transaction was successfully added into the locals tracker.
Once added there, the transaction may even be included into the chain at a later time,
when fee market conditions change.
This change improves on this by performing the validation in the locals tracker, basically
skipping some of the validation rules for local transactions. We still try to add the tx to the
main pool immediately, but an error will only be returned for transactions which are
fundamentally invalid.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
I ran into this while trying to debug a discv5 thing. I tried to disable
DNS discovery using `--discovery.dns=false`, which doesn't work.
Annoyingly, geth started anyway and discarded the error silently. I
eventually found my mistake, but it took way longer than it should have.
Also including a small change to the error message for invalid DNS URLs
here. The user actually needs to see the URL to make sense of the error.
This PR does a few things including:
- Remove `ContractRef` interface
- Remove `vm.AccountRef` which implements `ContractRef` interface
- Maintain the `jumpDests` struct in EVM for sharing between call frames
- Simplify the delegateCall context initialization
Currently, when calculating block's bloom, we loop through all the
receipt logs to calculate the hash value. However, normally, after going
through applyTransaction, the receipt's bloom is already calculated
based on the receipt log, so the block's bloom can be calculated by just
ORing these receipt's blooms.
```
goos: darwin
goarch: arm64
pkg: github.com/ethereum/go-ethereum/core/types
cpu: Apple M1 Pro
BenchmarkCreateBloom
BenchmarkCreateBloom/small
BenchmarkCreateBloom/small-10 810922 1481 ns/op 104 B/op 5 allocs/op
BenchmarkCreateBloom/large
BenchmarkCreateBloom/large-10 8173 143764 ns/op 9614 B/op 401 allocs/op
BenchmarkCreateBloom/small-mergebloom
BenchmarkCreateBloom/small-mergebloom-10 5178918 232.0 ns/op 0 B/op 0 allocs/op
BenchmarkCreateBloom/large-mergebloom
BenchmarkCreateBloom/large-mergebloom-10 54110 22207 ns/op 0 B/op 0 allocs/op
```
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
This removes the method `TestingTTDBlock` introduced by #30744. It was
added to make the beacon consensus engine aware of the merge block in
tests without relying on the total difficulty. However, tracking the
merge block this way is very annoying. We usually configure forks in the
`ChainConfig`, but the method is on the consensus engine, which isn't
always created in the same place. By sidestepping the `ChainConfig` we
don't get the usual fork-order checking, so it's possible to enable the
merge before the London fork, for example. This in turn can lead to very
hard-to-debug outputs and validation errors.
So here I'm changing the consensus engine to check the
`MergeNetsplitBlock` instead. Alternatively, we assume a network is
merged if it has a `TerminalTotalDifficulty` of zero, which is a very
common configuration in tests.
Here we add some more changes for live tracing API v1.1:
- Hook `OnSystemCallStartV2` was introduced with `VMContext` as parameter.
- Hook `OnBlockHashRead` was introduced.
- `GetCodeHash` was added to the state interface
- The new `WrapWithJournal` construction helps with tracking EVM reverts in the tracer.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR changes the signature of `CalcExcessBlobGas` to take in just
the header timestamp instead of the whole object. It also adds a sanity
check for the parent->child block order to `VerifyEIP4844Header`.
A clarification was made to EIP-7691 stating that at the fork boundary
it is required to use the target blob count associated with the head
block, rather than the parent as implemented here.
See for more: https://github.com/ethereum/EIPs/pull/9249
Replaces #29297, descendant from #27535
---------
This PR removes `locals` as a concept from transaction pools. Therefore,
the pool now acts as very a good simulation/approximation of how our
peers' pools behave. What this PR does instead, is implement a
locals-tracker, which basically is a little thing which, from time to
time, asks the pool "did you forget this transaction?". If it did, the
tracker resubmits it.
If the txpool _had_ forgotten it, chances are that the peers had also
forgotten it. It will be propagated again.
Doing this change means that we can simplify the pool internals, quite a
lot.
### The semantics of `local`
Historically, there has been two features, or usecases, that has been
combined into the concept of `locals`.
1. "I want my local node to remember this transaction indefinitely, and
resubmit to the network occasionally"
2. "I want this (valid) transaction included to be top-prio for my
miner"
This PR splits these features up, let's call it `1: local` and `2:
prio`. The `prio` is not actually individual transaction, but rather a
set of `address`es to prioritize.
The attribute `local` means it will be tracked, and `prio` means it will
be prioritized by miner.
For `local`: anything transaction received via the RPC is marked as
`local`, and tracked by the tracker.
For `prio`: any transactions from this sender is included first, when
building a block. The existing commandline-flag `--txpool.locals` sets
the set of `prio` addresses.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR defines the Osaka fork. An easy first step to start our work on
the next hardfork
(This is needed for EOF testing as well)
---------
Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com>
The total difficulty is the sum of all block difficulties from genesis
to a certain block. This value was used in PoW for deciding which chain
is heavier, and thus which chain to select. Since PoS has a different
fork selection algorithm, all blocks since the merge have a difficulty
of 0, and all total difficulties are the same for the past 2 years.
Whilst the TDs are mostly useless nowadays, there was never really a
reason to mess around removing them since they are so tiny. This
reasoning changes when we go down the path of pruned chain history. In
order to reconstruct any TD, we **must** retrieve all the headers from
chain head to genesis and then iterate all the difficulties to compute
the TD.
In a world where we completely prune past chain segments (bodies,
receipts, headers), it is not possible to reconstruct the TD at all. In
a world where we still keep chain headers and prune only the rest,
reconstructing it possible as long as we process (or download) the chain
forward from genesis, but trying to snap sync the head first and
backfill later hits the same issue, the TD becomes impossible to
calculate until genesis is backfilled.
All in all, the TD is a messy out-of-state, out-of-consensus computed
field that is overall useless nowadays, but code relying on it forces
the client into certain modes of operation and prevents other modes or
other optimizations. This PR completely nukes out the TD from the node.
It doesn't compute it, it doesn't operate on it, it's as if it didn't
even exist.
Caveats:
- Whenever we have APIs that return TD (devp2p handshake, tracer, etc.)
we return a TD of 0.
- For era files, we recompute the TD during export time (fairly quick)
to retain the format content.
- It is not possible to "verify" the merge point (i.e. with TD gone, TTD
is useless). Since we're not verifying PoW any more, just blindly trust
it, not verifying but blindly trusting the many year old merge point
seems just the same trust model.
- Our tests still need to be able to generate pre and post merge blocks,
so they need a new way to split the merge without TTD. The PR introduces
a settable ttdBlock field on the consensus object which is used by tests
as the block where originally the TTD happened. This is not needed for
live nodes, we never want to generate old blocks.
- One merge transition consensus test was disabled. With a
non-operational TD, testing how the client reacts to TTD is useless, it
cannot react.
Questions:
- Should we also drop total terminal difficulty from the genesis json?
It's a number we cannot react on any more, so maybe it would be cleaner
to get rid of even more concepts.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This pull request delivers the new version of the state history, where
the raw storage key is used instead of the hash.
Before the cancun fork, it's supported by protocol to destruct a
specific account and therefore, all the storage slot owned by it should
be wiped in the same transition.
Technically, storage wiping should be performed through storage
iteration, and only the storage key hash will be available for traversal
if the state snapshot is not available. Therefore, the storage key hash
is chosen as the identifier in the old version state history.
Fortunately, account self-destruction has been deprecated by the
protocol since the Cancun fork, and there are no empty accounts eligible
for deletion under EIP-158. Therefore, we can conclude that no storage
wiping should occur after the Cancun fork. In this case, it makes no
sense to keep using hash.
Besides, another big reason for making this change is the current format
state history is unusable if verkle is activated. Verkle tree has a
different key derivation scheme (merkle uses keccak256), the preimage of
key hash must be provided in order to make verkle rollback functional.
This pull request is a prerequisite for landing verkle.
Additionally, the raw storage key is more human-friendly for those who
want to manually check the history, even though Solidity already
performs some hashing to derive the storage location.
---
This pull request doesn't bump the database version, as I believe the
database should still be compatible if users degrade from the new geth
version to old one, the only side effect is the persistent new version
state history will be unusable.
---------
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
Fix the error comparison in tracer to prevent dropping revert reason data
---------
Co-authored-by: Martin <mrscdevel@gmail.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
This commit makes it so that the struct logger will not emit logs while
system calls are being executed. This will make it consistent with
the JSON and MD loggers. It is as it stands hard to distinguish when
system calls are being processed vs when a tx is being processed.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR implements EIP-7702: "Set EOA account code".
Specification: https://eips.ethereum.org/EIPS/eip-7702
> Add a new transaction type that adds a list of `[chain_id, address,
nonce, y_parity, r, s]` authorization tuples. For each tuple, write a
delegation designator `(0xef0100 ++ address)` to the signing account’s
code. All code reading operations must load the code pointed to by the
designator.
---------
Co-authored-by: Mario Vega <marioevz@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR modifies how the metrics library handles `Enabled`: previously,
the package `init` decided whether to serve real metrics or just
dummy-types.
This has several drawbacks:
- During pkg init, we need to determine whether metrics are enabled or
not. So we first hacked in a check if certain geth-specific
commandline-flags were enabled. Then we added a similar check for
geth-env-vars. Then we almost added a very elaborate check for
toml-config-file, plus toml parsing.
- Using "real" types and dummy types interchangeably means that
everything is hidden behind interfaces. This has a performance penalty,
and also it just adds a lot of code.
This PR removes the interface stuff, uses concrete types, and allows for
the setting of Enabled to happen later. It is still assumed that
`metrics.Enable()` is invoked early on.
The somewhat 'heavy' operations, such as ticking meters and exp-decay,
now checks the enable-flag to prevent resource leak.
The change may be large, but it's mostly pretty trivial, and from the
last time I gutted the metrics, I ensured that we have fairly good test
coverage.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
