New RPC method eth_sendRawTransactionSync(rawTx, timeoutMs?) that
submits a signed tx and blocks until a receipt is available or a timeout
elapses.
Two CLI flags to tune server-side limits:
--rpc.txsync.defaulttimeout (default wait window)
--rpc.txsync.maxtimeout (upper bound; requests are clamped)
closes https://github.com/ethereum/go-ethereum/issues/32094
---------
Co-authored-by: aodhgan <gawnieg@gmail.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This adds a temporary conversion path for blob transactions with legacy
proof sidecar. This feature will activate after Fusaka. We will phase
this out when the fork has sufficiently settled and client side
libraries have been upgraded to send the new proofs.
- Introduce a new subscription kind `transactionReceipts` to allow clients to
receive transaction receipts over WebSocket as soon as they are available.
- Accept optional `transactionHashes` filter to subscribe to receipts for specific
transactions; an empty or omitted filter subscribes to all receipts.
- Preserve the same receipt format as returned by `eth_getTransactionReceipt`.
- Avoid additional HTTP polling, reducing RPC load and latency.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This pr implements https://github.com/ethereum/go-ethereum/issues/32733
to make StateProcessor more customisable.
## Compatibility notes
This introduces a breaking change to users using geth EVM as a library.
The `NewStateProcessor` function now takes one parameter which has the
chainConfig embedded instead of 2 parameters.
Bail out of decodeHash when the raw hex string is longer than 32 byte before actually decoding.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
This disables the tx gaslimit cap for eth_call and related RPC operations.
I don't like how this fix works. Ideally we'd be checking the tx
gaslimit somewhere else, like in the block validator, or any other place
that considers block transactions. Doing the check in StateTransition
means it affects all possible ways of executing a message.
The challenge is finding a place for this check that also triggers
correctly in tests where it is wanted. So for now, we are just combining
this with the EOA sender check for transactions. Both are disabled for
call-type messages.
~Will probably be mostly supplanted by #32224, but this should do for
now for devnet 3.~
Seems like #32224 is going to take some more time, so I have completed
the implementation of eth_config here. It is quite a bit simpler to
implement now that the config hashing was removed.
---------
Co-authored-by: MariusVanDerWijden <m.vanderwijden@live.de>
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
This pull request implements #32235 , constructing blob sidecar in new
format (cell proof)
if the Osaka has been activated.
Apart from that, it introduces a pre-conversion step in the blob pool
before adding the txs.
This mechanism is essential for handling the remote **legacy** blob txs
from the network.
One thing is still missing and probably is worthy being highlighted
here: the blobpool may
contain several legacy blob txs before the Osaka and these txs should be
converted once
Osaka is activated. While the `GetBlob` API in blobpool is capable for
generating cell proofs
at the runtime, converting legacy txs at one time is much cheaper
overall.
---------
Co-authored-by: MariusVanDerWijden <m.vanderwijden@live.de>
Co-authored-by: lightclient <lightclient@protonmail.com>
This PR makes 2 changes to how
[EIP-7825](https://github.com/ethereum/go-ethereum/pull/31824) behaves.
When `eth_estimateGas` or `eth_createAccessList` is called without any
gas limit in the payload, geth will choose the block's gas limit or the
`RPCGasCap`, which can be larger than the `maxTxGas`.
When this happens for `estimateGas`, the gas estimation just errors out
and ends, when it should continue doing binary search to find the lowest
possible gas limit.
This PR will:
- Add a check to see if `hi` is larger than `maxTxGas` and cap it to
`maxTxGas` if it's larger. And add a special case handling for gas
estimation execute when it errs with `ErrGasLimitTooHigh`
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
The main purpose of this change is to enforce the version setting when
constructing the blobSidecar, avoiding creating sidecar with wrong/default
version tag.
This pull request tracks the state indexing progress in eth_syncing
RPC response, i.e. we will return non-null syncing status until indexing
has finished.
If Geth is engaged in a long-run block synchronization, such as a full
syncing over a large number of blocks, invoking `debug_setHead` will
cause `downloader.Cancel` to wait for all fetchers to stop first.
This can be time-consuming, particularly for the block processing
thread.
To address this, we manually call `blockchain.StopInsert` to interrupt
the blocking processing thread and allow it to exit immediately, and
after that call `blockchain.ResumeInsert` to resume the block
downloading process.
Additionally, we add a sanity check for the input block number of
`debug_setHead` to ensure its validity.
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
In this pull request, the original `CacheConfig` has been renamed to `BlockChainConfig`.
Over time, more fields have been added to `CacheConfig` to support
blockchain configuration. Such as `ChainHistoryMode`, which clearly extends
beyond just caching concerns.
Additionally, adding new parameters to the blockchain constructor has
become increasingly complicated, since it’s initialized across multiple
places in the codebase. A natural solution is to consolidate these arguments
into a dedicated configuration struct.
As a result, the existing `CacheConfig` has been redefined as `BlockChainConfig`.
Some parameters, such as `VmConfig`, `TxLookupLimit`, and `ChainOverrides`
have been moved into `BlockChainConfig`. Besides, a few fields in `BlockChainConfig`
were renamed, specifically:
- `TrieCleanNoPrefetch` -> `NoPrefetch`
- `TrieDirtyDisabled` -> `ArchiveMode`
Notably, this change won't affect the command line flags or the toml
configuration file. It's just an internal refactoring and fully backward-compatible.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Issue statement: when user requests eth_simulateV1 to return full
transaction objects, these objects always had an empty `from` field. The
reason is we lose the sender when translation the message into a
types.Transaction which is then later on serialized.
I did think of an alternative but opted to keep with this approach as it
keeps complexity at the edge. The alternative would be to pass down a
signer object to RPCMarshal* methods and define a custom signer which
keeps the senders in its state and doesn't attempt the signature
recovery.
Fixes https://github.com/ethereum/go-ethereum/issues/31732.
This logic was removed in the recent refactoring in the txindexer to
handle history cutoff (#31393). It was first introduced in this PR:
https://github.com/ethereum/go-ethereum/pull/28908.
I have tested it and it works as an alternative to #31745.
This PR packs 3 changes to the flow of fetching txs from the API:
- It caches the indexer tail after each run is over to avoid hitting the
db all the time as was done originally in #28908.
- Changes `backend.GetTransaction`. It doesn't return an error anymore
when tx indexer is in progress. It shifts the responsibility to the
caller to check the progress. The reason is that in most cases we anyway
check the txpool for the tx. If it was indeed a pending tx we can avoid
the indexer progress check.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR adds the `AuthorizationList` field to the `CallMsg` interface to support `eth_call`
and `eth_estimateGas` of set-code transactions.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR changes the chain view update mechanism of the log filter.
Previously the head updates were all wired through the indexer, even in
unindexed mode. This was both a bit weird and also unsafe as the
indexer's chain view was updates asynchronously with some delay, making
some log related tests flaky. Also, the reorg safety of the indexed
search was integrated with unindexed search in a weird way, relying on
`syncRange.ValidBlocks` in the unindexed case too, with a special
condition added to only consider the head of the valid range but not the
tail in the unindexed case.
In this PR the current chain view is directly accessible through the
filter backend and unindexed search is also chain view based, making it
inherently safe. The matcher sync mechanism is now only used for indexed
search as originally intended, removing a few ugly special conditions.
The PR is currently based on top of
https://github.com/ethereum/go-ethereum/pull/31642
Together they fix https://github.com/ethereum/go-ethereum/issues/31518
and replace https://github.com/ethereum/go-ethereum/pull/31542
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Add support for state overrides in eth_createAccessList. This will make the method consistent
with other execution methods.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Shout-out to @Gabriel-Trintinalia for discovering this issue. The gist
of it as follows:
When processing a block, we should provide the parent block as well as
the last 256 block hashes. Some of these parents data (specifically the
hash) was incorrect because even though during the processing of the
parent block we have updated the header, that header was not updating
the TransactionsRoot and ReceiptsRoot fields (types.NewBlock makes a new
copy of the header and changes it only on that instance).
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
eth_simulate was not processing prague system calls for history contract and EL
requests resulting in inaccurate stateRoot and requestsRoot fields in the block.
Here we add some more changes for live tracing API v1.1:
- Hook `OnSystemCallStartV2` was introduced with `VMContext` as parameter.
- Hook `OnBlockHashRead` was introduced.
- `GetCodeHash` was added to the state interface
- The new `WrapWithJournal` construction helps with tracking EVM reverts in the tracer.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR changes the signature of `CalcExcessBlobGas` to take in just
the header timestamp instead of the whole object. It also adds a sanity
check for the parent->child block order to `VerifyEIP4844Header`.
A clarification was made to EIP-7691 stating that at the fork boundary
it is required to use the target blob count associated with the head
block, rather than the parent as implemented here.
See for more: https://github.com/ethereum/EIPs/pull/9249
This PR builds on #29040 and updates it to the new version of the spec.
I filled the EEST tests and they pass.
Link to spec: https://eips.ethereum.org/EIPS/eip-7623
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com>
Co-authored-by: lightclient <lightclient@protonmail.com>
The total difficulty is the sum of all block difficulties from genesis
to a certain block. This value was used in PoW for deciding which chain
is heavier, and thus which chain to select. Since PoS has a different
fork selection algorithm, all blocks since the merge have a difficulty
of 0, and all total difficulties are the same for the past 2 years.
Whilst the TDs are mostly useless nowadays, there was never really a
reason to mess around removing them since they are so tiny. This
reasoning changes when we go down the path of pruned chain history. In
order to reconstruct any TD, we **must** retrieve all the headers from
chain head to genesis and then iterate all the difficulties to compute
the TD.
In a world where we completely prune past chain segments (bodies,
receipts, headers), it is not possible to reconstruct the TD at all. In
a world where we still keep chain headers and prune only the rest,
reconstructing it possible as long as we process (or download) the chain
forward from genesis, but trying to snap sync the head first and
backfill later hits the same issue, the TD becomes impossible to
calculate until genesis is backfilled.
All in all, the TD is a messy out-of-state, out-of-consensus computed
field that is overall useless nowadays, but code relying on it forces
the client into certain modes of operation and prevents other modes or
other optimizations. This PR completely nukes out the TD from the node.
It doesn't compute it, it doesn't operate on it, it's as if it didn't
even exist.
Caveats:
- Whenever we have APIs that return TD (devp2p handshake, tracer, etc.)
we return a TD of 0.
- For era files, we recompute the TD during export time (fairly quick)
to retain the format content.
- It is not possible to "verify" the merge point (i.e. with TD gone, TTD
is useless). Since we're not verifying PoW any more, just blindly trust
it, not verifying but blindly trusting the many year old merge point
seems just the same trust model.
- Our tests still need to be able to generate pre and post merge blocks,
so they need a new way to split the merge without TTD. The PR introduces
a settable ttdBlock field on the consensus object which is used by tests
as the block where originally the TTD happened. This is not needed for
live nodes, we never want to generate old blocks.
- One merge transition consensus test was disabled. With a
non-operational TD, testing how the client reacts to TTD is useless, it
cannot react.
Questions:
- Should we also drop total terminal difficulty from the genesis json?
It's a number we cannot react on any more, so maybe it would be cleaner
to get rid of even more concepts.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
We still need to decide how to handle non-specfic `chainId` in the JSON
encoding of authorizations. With `chainId` being a uint64, the previous
implementation just used value zero. However, it might actually be more
correct to use the value `null` for this case.
As the node hash scheme in verkle and merkle are totally different, the
original default node hasher in pathdb is no longer suitable. Therefore,
this pull request configures different node hasher respectively.
