Drop peer if sending the same transaction multiple times in a single message.
Fixes https://github.com/ethereum/go-ethereum/issues/32724
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Csaba Kiraly <csaba.kiraly@gmail.com>
The main purpose of this change is to enforce the version setting when
constructing the blobSidecar, avoiding creating sidecar with wrong/default
version tag.
In this pull request, the original `CacheConfig` has been renamed to `BlockChainConfig`.
Over time, more fields have been added to `CacheConfig` to support
blockchain configuration. Such as `ChainHistoryMode`, which clearly extends
beyond just caching concerns.
Additionally, adding new parameters to the blockchain constructor has
become increasingly complicated, since it’s initialized across multiple
places in the codebase. A natural solution is to consolidate these arguments
into a dedicated configuration struct.
As a result, the existing `CacheConfig` has been redefined as `BlockChainConfig`.
Some parameters, such as `VmConfig`, `TxLookupLimit`, and `ChainOverrides`
have been moved into `BlockChainConfig`. Besides, a few fields in `BlockChainConfig`
were renamed, specifically:
- `TrieCleanNoPrefetch` -> `NoPrefetch`
- `TrieDirtyDisabled` -> `ArchiveMode`
Notably, this change won't affect the command line flags or the toml
configuration file. It's just an internal refactoring and fully backward-compatible.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR implements eth/69. This protocol version drops the bloom filter
from receipts messages, reducing the amount of data needed for a sync
by ~530GB (2.3B txs * 256 byte) uncompressed. Compressed this will
be reduced to ~100GB
The new version also changes the Status message and introduces the
BlockRangeUpdate message to relay information about the available history
range.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This pull request introduces two constraints in the blobPool:
(a) If the sender has a pending authorization or delegation, only one
in-flight
executable transaction can be cached.
(b) If the authority address in a SetCode transaction is already
reserved by
the blobPool, the transaction will be rejected.
These constraints mitigate an attack where an attacker spams the pool
with
numerous blob transactions, evicts other transactions, and then cancels
all
pending blob transactions by draining the sender’s funds if they have a
delegation.
Note, because there is no exclusive lock held between different subpools
when processing transactions, it's totally possible the SetCode
transaction
and blob transactions with conflict sender and authorities are accepted
simultaneously. I think it's acceptable as it's very hard to be
exploited.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
This is an alternative to #31309
With eth/68, transaction announcement must have transaction type and
size. So in announceTransactions, we need to query the transaction from
transaction pool with its hash. This creates overhead in case of blob
transaction which needs to load data from billy and RLP decode. This
commit creates a lightweight lookup from transaction hash to transaction
size and a function GetMetadata to query transaction type and
transaction size given the transaction hash.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Currently, when answering GetPooledTransaction request, txpool.Get() is
used. When the requested hash is blob transaction, blobpool.Get() is
called. This function loads the RLP-encoded transaction from limbo then
decodes and returns. Later, in answerGetPooledTransactions, we need to
RLP encode again. This decode then encode is wasteful. This commit adds
GetRLP to transaction pool interface so that answerGetPooledTransactions
can use the RLP-encoded from limbo directly.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This removes the method `TestingTTDBlock` introduced by #30744. It was
added to make the beacon consensus engine aware of the merge block in
tests without relying on the total difficulty. However, tracking the
merge block this way is very annoying. We usually configure forks in the
`ChainConfig`, but the method is on the consensus engine, which isn't
always created in the same place. By sidestepping the `ChainConfig` we
don't get the usual fork-order checking, so it's possible to enable the
merge before the London fork, for example. This in turn can lead to very
hard-to-debug outputs and validation errors.
So here I'm changing the consensus engine to check the
`MergeNetsplitBlock` instead. Alternatively, we assume a network is
merged if it has a `TerminalTotalDifficulty` of zero, which is a very
common configuration in tests.
The total difficulty is the sum of all block difficulties from genesis
to a certain block. This value was used in PoW for deciding which chain
is heavier, and thus which chain to select. Since PoS has a different
fork selection algorithm, all blocks since the merge have a difficulty
of 0, and all total difficulties are the same for the past 2 years.
Whilst the TDs are mostly useless nowadays, there was never really a
reason to mess around removing them since they are so tiny. This
reasoning changes when we go down the path of pruned chain history. In
order to reconstruct any TD, we **must** retrieve all the headers from
chain head to genesis and then iterate all the difficulties to compute
the TD.
In a world where we completely prune past chain segments (bodies,
receipts, headers), it is not possible to reconstruct the TD at all. In
a world where we still keep chain headers and prune only the rest,
reconstructing it possible as long as we process (or download) the chain
forward from genesis, but trying to snap sync the head first and
backfill later hits the same issue, the TD becomes impossible to
calculate until genesis is backfilled.
All in all, the TD is a messy out-of-state, out-of-consensus computed
field that is overall useless nowadays, but code relying on it forces
the client into certain modes of operation and prevents other modes or
other optimizations. This PR completely nukes out the TD from the node.
It doesn't compute it, it doesn't operate on it, it's as if it didn't
even exist.
Caveats:
- Whenever we have APIs that return TD (devp2p handshake, tracer, etc.)
we return a TD of 0.
- For era files, we recompute the TD during export time (fairly quick)
to retain the format content.
- It is not possible to "verify" the merge point (i.e. with TD gone, TTD
is useless). Since we're not verifying PoW any more, just blindly trust
it, not verifying but blindly trusting the many year old merge point
seems just the same trust model.
- Our tests still need to be able to generate pre and post merge blocks,
so they need a new way to split the merge without TTD. The PR introduces
a settable ttdBlock field on the consensus object which is used by tests
as the block where originally the TTD happened. This is not needed for
live nodes, we never want to generate old blocks.
- One merge transition consensus test was disabled. With a
non-operational TD, testing how the client reacts to TTD is useless, it
cannot react.
Questions:
- Should we also drop total terminal difficulty from the genesis json?
It's a number we cannot react on any more, so maybe it would be cleaner
to get rid of even more concepts.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR modifies how the metrics library handles `Enabled`: previously,
the package `init` decided whether to serve real metrics or just
dummy-types.
This has several drawbacks:
- During pkg init, we need to determine whether metrics are enabled or
not. So we first hacked in a check if certain geth-specific
commandline-flags were enabled. Then we added a similar check for
geth-env-vars. Then we almost added a very elaborate check for
toml-config-file, plus toml parsing.
- Using "real" types and dummy types interchangeably means that
everything is hidden behind interfaces. This has a performance penalty,
and also it just adds a lot of code.
This PR removes the interface stuff, uses concrete types, and allows for
the setting of Enabled to happen later. It is still assumed that
`metrics.Enable()` is invoked early on.
The somewhat 'heavy' operations, such as ticking meters and exp-decay,
now checks the enable-flag to prevent resource leak.
The change may be large, but it's mostly pretty trivial, and from the
last time I gutted the metrics, I ensured that we have fairly good test
coverage.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
rebased https://github.com/ethereum/go-ethereum/pull/29766 . The
downstream branch appears to have been deleted and I don't have perms to
push to that fork.
`TerminalTotalDifficultyPassed` is removed. `TerminalTotalDifficulty`
must now be non-nil, and it is expected that networks are already
merged: we can only import PoW/Clique chains, not produce blocks on
them.
---------
Co-authored-by: stevemilk <wangpeculiar@gmail.com>
Changelog: https://golangci-lint.run/product/changelog/#1610
Removes `exportloopref` (no longer needed), replaces it with
`copyloopvar` which is basically the opposite.
Also adds:
- `durationcheck`
- `gocheckcompilerdirectives`
- `reassign`
- `mirror`
- `tenv`
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This implements recent changes to EIP-7685, EIP-6110, and
execution-apis.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Co-authored-by: Shude Li <islishude@gmail.com>
This PR changes how sidechains are handled.
Before the merge, it was possible to import a chain with lower td and not set it as canonical. After the merge, we expect every chain that we get via InsertChain to be canonical. Non-canonical blocks can still be inserted
with InsertBlockWIthoutSetHead.
If during the InsertChain, the existing chain is not canonical anymore, we mark it as a sidechain and send the SideChainEvents normally.
Here I am adding a discv5 nodes source into the p2p dial iterator. It's
an improved version of #29533.
Unlike discv4, the discv5 random nodes iterator will always provide full
ENRs. This means we can apply filtering to the results and will only try
dialing nodes which explictly opt into the eth protocol with a matching
chain.
I have also removed the dial iterator from snap. We don't have an
official DNS list for snap anymore, and I doubt anyone else is running
one. While we could potentially filter for snap on discv5, there will be
very few nodes announcing it, and the extra iterator would just stall
the dialer.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
* eth: drop support for forward sync triggers and head block packets
* consensus, eth: enforce always merged network
* eth: fix tx looper startup and shutdown
* cmd, core: fix some tests
* core: remove notion of future blocks
* core, eth: drop unused methods and types
This change makes the legacy transaction pool use of `uint256.Int` instead of `big.Int`. The changes are made primarily only on the internal functions of legacypool.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
This changes the forkID calculation to ignore time-based forks that occurred before the
genesis block. It's supposed to be done this way because the spec says:
> If a chain is configured to start with a non-Frontier ruleset already in its genesis, that is NOT considered a fork.
This PR removes the newly added txpool.Transaction wrapper type, and instead adds a way
of keeping the blob sidecar within types.Transaction. It's better this way because most
code in go-ethereum does not care about blob transactions, and probably never will. This
will start mattering especially on the client side of RPC, where all APIs are based on
types.Transaction. Users need to be able to use the same signing flows they already
have.
However, since blobs are only allowed in some places but not others, we will now need to
add checks to avoid creating invalid blocks. I'm still trying to figure out the best place
to do some of these. The way I have it currently is as follows:
- In block validation (import), txs are verified not to have a blob sidecar.
- In miner, we strip off the sidecar when committing the transaction into the block.
- In TxPool validation, txs must have a sidecar to be added into the blobpool.
- Note there is a special case here: when transactions are re-added because of a chain
reorg, we cannot use the transactions gathered from the old chain blocks as-is,
because they will be missing their blobs. This was previously handled by storing the
blobs into the 'blobpool limbo'. The code has now changed to store the full
transaction in the limbo instead, but it might be confusing for code readers why we're
not simply adding the types.Transaction we already have.
Code changes summary:
- txpool.Transaction removed and all uses replaced by types.Transaction again
- blobpool now stores types.Transaction instead of defining its own blobTx format for storage
- the blobpool limbo now stores types.Transaction instead of storing only the blobs
- checks to validate the presence/absence of the blob sidecar added in certain critical places
* all: move main transaction pool into a subpool
* go.mod: remove superfluous updates
* core/txpool: review fixes, handle txs rejected by all subpools
* core/txpool: typos
* core/txpool: abstraction prep work for secondary pools (blob pool)
* core/txpool: leave subpool concepts to a followup pr
* les: fix tests using hard coded errors
* core/txpool: use bitmaps instead of maps for tx type filtering
This PR relaxes the block body ingress handling a bit: if block body withdrawals are missing (but expected to be empty), the body withdrawals are set to 'empty list' before being passed to upper layers.
This fixes an issue where a block passed from EthereumJS to geth was deemed invalid.
This change ports some changes from the main PBSS PR:
- get rid of callback function in `trie.Database.Commit` which is not required anymore
- rework the `nodeResolver` in `trie.Iterator` to make it compatible with multiple state scheme
- some other shallow changes in tests and typo-fixes
