This PR adds an extra condition to the log indexer initialization in
order to avoid initializing with block 0 as target head. Previously this
caused the indexer to initialize without a checkpoint. Later, when the
real chain head was set, it indexed the entire history, then unindexed
most of it if only the recent history was supposed to be indexed. Now
the init only happens when there is an actual synced chain head and
therefore the index is initialized at the most recent checkpoint and
only the last year is indexed according to the default parameters.
During checkpoint initialization the best available checkpoint is also
checked against the history cutoff point and fails if the indexing would
have to start from a block older than the cutoff. If initialization
fails then the indexer reverts to unindexed mode instead of retrying
because the the failure conditions cannot be expected to recover later.
This pull request fixes a broken unit test
```
=== CONT TestTracingWithOverrides
api_test.go:1012: result: {"gas":21167,"failed":false,"returnValue":"0x0000000000000000000000000000000000000000000000000000000000000002","structLogs":[{"pc":0,"op":"PUSH1","gas":24978860,"gasCost":3,"depth":1,"stack":[]},{"pc":2,"op":"CALLDATALOAD","gas":24978857,"gasCost":3,"depth":1,"stack":["0x0"]},{"pc":3,"op":"PUSH1","gas":24978854,"gasCost":3,"depth":1,"stack":["0x1"]},{"pc":5,"op":"ADD","gas":24978851,"gasCost":3,"depth":1,"stack":["0x1","0x1"]},{"pc":6,"op":"PUSH1","gas":24978848,"gasCost":3,"depth":1,"stack":["0x2"]},{"pc":8,"op":"MSTORE","gas":24978845,"gasCost":6,"depth":1,"stack":["0x2","0x0"]},{"pc":9,"op":"PUSH1","gas":24978839,"gasCost":3,"depth":1,"stack":[]},{"pc":11,"op":"PUSH1","gas":24978836,"gasCost":3,"depth":1,"stack":["0x20"]},{"pc":13,"op":"RETURN","gas":24978833,"gasCost":0,"depth":1,"stack":["0x20","0x0"]}]}
api_test.go:1013: test 10, result mismatch, have
{21167 false 0x0000000000000000000000000000000000000000000000000000000000000002}
, want
{21167 false 0000000000000000000000000000000000000000000000000000000000000002}
api_test.go:1012: result: {"gas":25664,"failed":false,"returnValue":"0x000000000000000000000000c6e93f4c1920eaeaa1e699f76a7a8c18e3056074","structLogs":[]}
api_test.go:1013: test 11, result mismatch, have
{25664 false 0x000000000000000000000000c6e93f4c1920eaeaa1e699f76a7a8c18e3056074}
, want
{25664 false 000000000000000000000000c6e93f4c1920eaeaa1e699f76a7a8c18e3056074}
```
This is a **breaking change** to the opcode tracer. The top-level
`returnValue` field of a trace will be now hex-encoded. If the return
data is empty, this field will contain "0x".
Fixes#31196
Currently, when answering GetPooledTransaction request, txpool.Get() is
used. When the requested hash is blob transaction, blobpool.Get() is
called. This function loads the RLP-encoded transaction from limbo then
decodes and returns. Later, in answerGetPooledTransactions, we need to
RLP encode again. This decode then encode is wasteful. This commit adds
GetRLP to transaction pool interface so that answerGetPooledTransactions
can use the RLP-encoded from limbo directly.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
this adds 2 features to improve `geth --dev` experience.
1. we don't need to use `dev_SetFeeRecipient` to set initial coinbase
address. it was a pain.
2. we don't need to unlock keystore if we don't use it. we had it
because of clique.
This pull request enhances the unit test, avoiding unnecessary failure
in CI.
```
--- FAIL: TestSimulatedBeaconSendWithdrawals (12.08s)
simulated_beacon_test.go:139: timed out without including all withdrawals/txs
FAIL
```
Here I am adding a config option and geth flag (`--history.chain`) for
configuring history pruning. There are two options available:
- `--history.chain all` is the default and will keep all history like
before.
- `--history.chain postmerge` will configure the history cutoff point to
the merge block.
The option doesn't actually do anything right now, but we need it as a
precursor for other history pruning changes.
This ensures that if we receive a blob transaction announcement where we cannot
link the tx to the sidecar commitments, we will drop the sending peer. This check
is added in the protocol handler for the PooledTransactions message.
Tests for this have also been added in the cross-client "eth" protocol test suite.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
In transaction-sending APIs such as `eth_sendRawTransaction`, a submitted transaction
failing the configured txpool validation rules (i.e. fee too low) would cause an error to be
returned, even though the transaction was successfully added into the locals tracker.
Once added there, the transaction may even be included into the chain at a later time,
when fee market conditions change.
This change improves on this by performing the validation in the locals tracker, basically
skipping some of the validation rules for local transactions. We still try to add the tx to the
main pool immediately, but an error will only be returned for transactions which are
fundamentally invalid.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
I ran into this while trying to debug a discv5 thing. I tried to disable
DNS discovery using `--discovery.dns=false`, which doesn't work.
Annoyingly, geth started anyway and discarded the error silently. I
eventually found my mistake, but it took way longer than it should have.
Also including a small change to the error message for invalid DNS URLs
here. The user actually needs to see the URL to make sense of the error.
This PR does a few things including:
- Remove `ContractRef` interface
- Remove `vm.AccountRef` which implements `ContractRef` interface
- Maintain the `jumpDests` struct in EVM for sharing between call frames
- Simplify the delegateCall context initialization
Currently, when calculating block's bloom, we loop through all the
receipt logs to calculate the hash value. However, normally, after going
through applyTransaction, the receipt's bloom is already calculated
based on the receipt log, so the block's bloom can be calculated by just
ORing these receipt's blooms.
```
goos: darwin
goarch: arm64
pkg: github.com/ethereum/go-ethereum/core/types
cpu: Apple M1 Pro
BenchmarkCreateBloom
BenchmarkCreateBloom/small
BenchmarkCreateBloom/small-10 810922 1481 ns/op 104 B/op 5 allocs/op
BenchmarkCreateBloom/large
BenchmarkCreateBloom/large-10 8173 143764 ns/op 9614 B/op 401 allocs/op
BenchmarkCreateBloom/small-mergebloom
BenchmarkCreateBloom/small-mergebloom-10 5178918 232.0 ns/op 0 B/op 0 allocs/op
BenchmarkCreateBloom/large-mergebloom
BenchmarkCreateBloom/large-mergebloom-10 54110 22207 ns/op 0 B/op 0 allocs/op
```
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
This removes the method `TestingTTDBlock` introduced by #30744. It was
added to make the beacon consensus engine aware of the merge block in
tests without relying on the total difficulty. However, tracking the
merge block this way is very annoying. We usually configure forks in the
`ChainConfig`, but the method is on the consensus engine, which isn't
always created in the same place. By sidestepping the `ChainConfig` we
don't get the usual fork-order checking, so it's possible to enable the
merge before the London fork, for example. This in turn can lead to very
hard-to-debug outputs and validation errors.
So here I'm changing the consensus engine to check the
`MergeNetsplitBlock` instead. Alternatively, we assume a network is
merged if it has a `TerminalTotalDifficulty` of zero, which is a very
common configuration in tests.
Here we add some more changes for live tracing API v1.1:
- Hook `OnSystemCallStartV2` was introduced with `VMContext` as parameter.
- Hook `OnBlockHashRead` was introduced.
- `GetCodeHash` was added to the state interface
- The new `WrapWithJournal` construction helps with tracking EVM reverts in the tracer.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR changes the signature of `CalcExcessBlobGas` to take in just
the header timestamp instead of the whole object. It also adds a sanity
check for the parent->child block order to `VerifyEIP4844Header`.
A clarification was made to EIP-7691 stating that at the fork boundary
it is required to use the target blob count associated with the head
block, rather than the parent as implemented here.
See for more: https://github.com/ethereum/EIPs/pull/9249
