The GetHeader function was incorrectly returning an error when
encountering nil peers in the peers list, which contradicted the comment
"keep retrying if none are yet available".
Changed the logic to skip nil peers with 'continue' instead of returning
an error, allowing the function to properly iterate through all
available peers and attempt to retrieve the target header from each valid peer.
This ensures the function behaves as intended - trying all available
peers before giving up, rather than failing on the first nil peer encountered.
The previous comment stated that every 3rd block has a tx and every 5th
has an uncle.
The implementation actually adds one transaction to every second block
and does not add uncles.
Updated the comment to reflect the real behavior to avoid confusion when
reading tests.
This pull request fixes an issue in disabling direct-ancient mode in
snap sync.
Specifically, if `origin >= frozen && origin != 0`, it implies a part of
chain data has been written into the key-value store, all the following
writes into ancient store scheduled by downloader will be rejected
with error
`ERROR[07-10|03:46:57.924] Error importing chain data to ancients
err="can't add block 1166 hash: the append operation is out-order: have
1166 want 0"`.
This issue is detected by the https://github.com/ethpandaops/kurtosis-sync-test,
which initiates the first snap sync cycle without the finalized header and
implicitly disables the direct-ancient mode. A few seconds later the second
snap sync cycle is initiated with the finalized information and direct-ancient mode
is enabled incorrectly.
Small update for logs when syncing with blsync. Downgrades the "latest
filled block is not available" to warn.
Co-authored-by: shantichanal <158101918+shantichanal@users.noreply.github.com>
This pull request tracks the state indexing progress in eth_syncing
RPC response, i.e. we will return non-null syncing status until indexing
has finished.
If Geth is engaged in a long-run block synchronization, such as a full
syncing over a large number of blocks, invoking `debug_setHead` will
cause `downloader.Cancel` to wait for all fetchers to stop first.
This can be time-consuming, particularly for the block processing
thread.
To address this, we manually call `blockchain.StopInsert` to interrupt
the blocking processing thread and allow it to exit immediately, and
after that call `blockchain.ResumeInsert` to resume the block
downloading process.
Additionally, we add a sanity check for the input block number of
`debug_setHead` to ensure its validity.
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
In this pull request, the original `CacheConfig` has been renamed to `BlockChainConfig`.
Over time, more fields have been added to `CacheConfig` to support
blockchain configuration. Such as `ChainHistoryMode`, which clearly extends
beyond just caching concerns.
Additionally, adding new parameters to the blockchain constructor has
become increasingly complicated, since it’s initialized across multiple
places in the codebase. A natural solution is to consolidate these arguments
into a dedicated configuration struct.
As a result, the existing `CacheConfig` has been redefined as `BlockChainConfig`.
Some parameters, such as `VmConfig`, `TxLookupLimit`, and `ChainOverrides`
have been moved into `BlockChainConfig`. Besides, a few fields in `BlockChainConfig`
were renamed, specifically:
- `TrieCleanNoPrefetch` -> `NoPrefetch`
- `TrieDirtyDisabled` -> `ArchiveMode`
Notably, this change won't affect the command line flags or the toml
configuration file. It's just an internal refactoring and fully backward-compatible.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This fixes a regression introduced by #29158 where receipts of empty blocks
were stored into the database as an empty byte array, instead of an RLP empty list.
Fixes#31938
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This implements a backing store for chain history based on era1 files.
The new store is integrated with the freezer. Queries for blocks and receipts
below the current freezer tail are handled by the era store.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: lightclient <lightclient@protonmail.com>
This PR implements eth/69. This protocol version drops the bloom filter
from receipts messages, reducing the amount of data needed for a sync
by ~530GB (2.3B txs * 256 byte) uncompressed. Compressed this will
be reduced to ~100GB
The new version also changes the Status message and introduces the
BlockRangeUpdate message to relay information about the available history
range.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This pull request introduces new sync logic for pruning mode. The downloader will now skip
insertion of block bodies and receipts before the configured history cutoff point.
Originally, in snap sync, the header chain and other components (bodies and receipts) were
inserted separately. However, in Proof-of-Stake, this separation is unnecessary since the
sync target is already verified by the CL.
To simplify the process, this pull request modifies `InsertReceiptChain` to insert headers
along with block bodies and receipts together. Besides, `InsertReceiptChain` doesn't have
the notion of reorg, as the common ancestor is always be found before the sync and extra
side chain is truncated at the beginning if they fall in the ancient store. The stale
canonical chain flags will always be rewritten by the new chain. Explicit reorg logic is
no longer required in `InsertReceiptChain`.
The total difficulty is the sum of all block difficulties from genesis
to a certain block. This value was used in PoW for deciding which chain
is heavier, and thus which chain to select. Since PoS has a different
fork selection algorithm, all blocks since the merge have a difficulty
of 0, and all total difficulties are the same for the past 2 years.
Whilst the TDs are mostly useless nowadays, there was never really a
reason to mess around removing them since they are so tiny. This
reasoning changes when we go down the path of pruned chain history. In
order to reconstruct any TD, we **must** retrieve all the headers from
chain head to genesis and then iterate all the difficulties to compute
the TD.
In a world where we completely prune past chain segments (bodies,
receipts, headers), it is not possible to reconstruct the TD at all. In
a world where we still keep chain headers and prune only the rest,
reconstructing it possible as long as we process (or download) the chain
forward from genesis, but trying to snap sync the head first and
backfill later hits the same issue, the TD becomes impossible to
calculate until genesis is backfilled.
All in all, the TD is a messy out-of-state, out-of-consensus computed
field that is overall useless nowadays, but code relying on it forces
the client into certain modes of operation and prevents other modes or
other optimizations. This PR completely nukes out the TD from the node.
It doesn't compute it, it doesn't operate on it, it's as if it didn't
even exist.
Caveats:
- Whenever we have APIs that return TD (devp2p handshake, tracer, etc.)
we return a TD of 0.
- For era files, we recompute the TD during export time (fairly quick)
to retain the format content.
- It is not possible to "verify" the merge point (i.e. with TD gone, TTD
is useless). Since we're not verifying PoW any more, just blindly trust
it, not verifying but blindly trusting the many year old merge point
seems just the same trust model.
- Our tests still need to be able to generate pre and post merge blocks,
so they need a new way to split the merge without TTD. The PR introduces
a settable ttdBlock field on the consensus object which is used by tests
as the block where originally the TTD happened. This is not needed for
live nodes, we never want to generate old blocks.
- One merge transition consensus test was disabled. With a
non-operational TD, testing how the client reacts to TTD is useless, it
cannot react.
Questions:
- Should we also drop total terminal difficulty from the genesis json?
It's a number we cannot react on any more, so maybe it would be cleaner
to get rid of even more concepts.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR modifies how the metrics library handles `Enabled`: previously,
the package `init` decided whether to serve real metrics or just
dummy-types.
This has several drawbacks:
- During pkg init, we need to determine whether metrics are enabled or
not. So we first hacked in a check if certain geth-specific
commandline-flags were enabled. Then we added a similar check for
geth-env-vars. Then we almost added a very elaborate check for
toml-config-file, plus toml parsing.
- Using "real" types and dummy types interchangeably means that
everything is hidden behind interfaces. This has a performance penalty,
and also it just adds a lot of code.
This PR removes the interface stuff, uses concrete types, and allows for
the setting of Enabled to happen later. It is still assumed that
`metrics.Enable()` is invoked early on.
The somewhat 'heavy' operations, such as ticking meters and exp-decay,
now checks the enable-flag to prevent resource leak.
The change may be large, but it's mostly pretty trivial, and from the
last time I gutted the metrics, I ensured that we have fairly good test
coverage.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Lots of packages depend on eth/downloader just for the SyncMode type.
Since we have a dedicated package for eth protocol configuration, it
makes more sense to define SyncMode there, turning eth/downloader into
more of a leaf package.
Changelog: https://golangci-lint.run/product/changelog/#1610
Removes `exportloopref` (no longer needed), replaces it with
`copyloopvar` which is basically the opposite.
Also adds:
- `durationcheck`
- `gocheckcompilerdirectives`
- `reassign`
- `mirror`
- `tenv`
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This implements recent changes to EIP-7685, EIP-6110, and
execution-apis.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Co-authored-by: Shude Li <islishude@gmail.com>
This PR changes how sidechains are handled.
Before the merge, it was possible to import a chain with lower td and not set it as canonical. After the merge, we expect every chain that we get via InsertChain to be canonical. Non-canonical blocks can still be inserted
with InsertBlockWIthoutSetHead.
If during the InsertChain, the existing chain is not canonical anymore, we mark it as a sidechain and send the SideChainEvents normally.
Fixes a slight miscalculation in the downloader queue, which was not accurately taking block withdrawals into account when calculating the size of the items in the queue
This PR fixes an issue in the setMode method of beaconBackfiller where the
log message was not displaying the previous mode correctly. The log message
now shows both the old and new sync modes.
This pull request fixes the flay test TestSkeletonSyncRetrievals. In this test, we first
trigger a sync cycle and wait for it to meet certain expectations. We then inject a new
head and potentially also a new peer, then perform another final sync. The test now
performs the newPeer addition before launching the final sync, and waits a bit for that
peer to get registered. This fixes the logic race that made the test fail sometimes.
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
* all: refactor so NewBlock(..) and WithBody(..) take a types.Body
* core: fixup comments, remove txs != receipts panic
* core/types: add empty withdrawls to body if len == 0
This change adds a testcase and fixes a corner-case in the skeleton sync.
With this change, when doing the skeleton cleanup, we check if the filled header is acually within the range of what we were meant to backfill. If not, it means the backfill was a noop (possibly because we started and stopped it so quickly that it didn't have time to do any meaningful work). In that case, just don't clean up anything.
---------
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
time.After is equivalent to NewTimer(d).C, and does not call Stop if the timer is no longer needed. This can cause memory leaks. This change changes many such occations to use NewTimer instead, and calling Stop once the timer is no longer needed.
* eth/downloader: fix skeleton cleanup
* eth/downloader: short circuit if nothing to delete
* eth/downloader: polish the logic in cleanup
* eth/downloader: address comments
This change simplifies the logic for indexing transactions and enhances the UX when transaction is not found by returning more information to users.
Transaction indexing is now considered as a part of the initial sync, and `eth.syncing` will thus be `true` if transaction indexing is not yet finished. API consumers can use the syncing status to determine if the node is ready to serve users.
The code to compute a versioned hash was duplicated a couple times, and also had a small
issue: if we ever change params.BlobTxHashVersion, it will most likely also cause changes
to the actual hash computation. So it's a bit useless to have this constant in params.
