* Add CLI flags to config LevelDB table/total sizes
I wired up CLI flags to allow configuring LevelDB table and total sizes:
- `--leveldb.compaction.table.size`, LevelDB SSTable file size factor in MiB (default: 2)
- `--leveldb.compaction.table.multiplier`, multiplier on LevelDB SSTable file size (default: 1)
- `--leveldb.compaction.total.size`, total size factor in MiB of LevelDB levels (default: 10)
- `--leveldb.compaction.total.multiplier`, multiplier on LevelDB total level size (default: 10)
N.B. that the default values for these configs are exactly the same as
before this changset and so Bor behavior should not change unless these
flags are deliberately overridden. Bor/Geth inherited the default values
from [the `goleveldb`
defaults](126854af5e/leveldb/opt/options.go).
We (Alchemy) found it necessary to override these configs as follows to
keep Bor archive nodes tracking the canonical chain:
- `--leveldb.compaction.table.size=4`
- `--leveldb.compaction.total.size=20`
These overrides double the size of LevelDB SSTable files (2 MiB -> 4
MiB) and also the total amount of data in each level (100 MiB -> 200
MiB, 1,000 MiB -> 2,000 MiB, etc.). The idea is to have LevelDB read and
write data in larger chunks while keeping the proportional frequency of
compaction operations the same as in the original defaults defined by
Dean and Ghemawat.
Without these overrides we found that our archive nodes would tend to
fall into a "LevelDB compaction loop of death" where the incoming stream
of blockchain data could not be flowed into LevelDB's structure quickly
enough, resulting in the node blocking writes for long periods of time
while LevelDB's single-threaded compaction organized the data. Over
time the nodes would fall farther and farther behind the canonical chain
head, metaphorically dying a slow node's death.
These configs can be changed on existing node databases (resyncing is
not necessary). LevelDB appears to work correctly with SSTable files of
different sizes. Note that the database does not undergo any sort of
migration when changing these configs. Only newly-written files (due to
new data or compaction) are affected by these configs.
* Update docs
* Adjust line spacing for linter
* Replace map with `ExtraDBConfig`
* Rename `LevelDbConfig` to `ExtraDBConfig`
* Regenerate docs
* Adding in Mumbai/Mainnet precursor deb packaging for tests to use during upgrade(iterations to come)
* Added changes per discussion in PR, more changes may be necessary
* Adding prerelease true
* Disabling goreleaser
* Removing README swap file
* change bor_dir and add bor user for v0.3.0 release
* rollback bor user and use root
* metrics: handle equal to separated config flag (#596)
* metrics: handle based config path
* internal/cli/server: add more context to logs
* use space separated flag and value in bor.service
* fixed static-nodes related buf (os independent) (#598)
* fixed static-nodes related buf (os independent)
* taking static-nodes as input if default not present
* Update default flags (#600)
* internal/cli/server: use geth's default for txpool.pricelimit and add comments
* builder/files: update config.toml for mainnet
* packaging/templates: update defaults for mainnet and mumbai
* internal/cli/server: skip overriding cache
* packaging/templates: update cache value for mainnet
* packaging/templates: update gcmode for archive mumbai node
* metrics: handle nil telemetry config (#601)
* resolve merge conflicts
* update go version in release.yml
* update goversion in makefile
* update Docker login for goreleaser-cross v1.19
* Cleanup for the packager to use git tag in the package profile naming. Added conditional check for directory structure, this is in prep for v0.3.1, as this will create a failure on upgrade path in package due to file exist
* added a toml configuration file with comments describing each flag (#607)
* added a toml configuration file with comments describing each flag
* internal/cli/server: update flag description
* docs/cli: update example config and description of flags
* docs: update new-cli docs
Co-authored-by: Manav Darji <manavdarji.india@gmail.com>
* Adding of 0.3.0 package changes, control file updates, postinst changes, and packager update
* added ancient datadir flag and toml field, need to decide on default value and update the conversion script
* updated toml files with ancient field
* Add support for new flags in new config.toml, which were present in old config.toml (#612)
* added HTTPTimeouts, and TrieTimeout flag in new tol, from old toml
* added RAW fields for these time.Duration flags
* updated the conversion script to support these extra 4 flags
* removed hcl and json config tests as we are only supporting toml config files
* updated toml files with cache.timeout field
* updated toml files with jsonrpc.timeouts field
* tests/bor: expect a call for latest checkpoint
* tests/bor: expect a call for latest checkpoint
* packaging/templates: update cache values for archive nodes
Co-authored-by: Manav Darji <manavdarji.india@gmail.com>
* remove unwanted code
* Fix docker publish authentication issue
In gorelease-cross 1.19+, dockerhub authentication will require docker
logion action followed by mounting docker config file. See
https://github.com/goreleaser/goreleaser-cross#github-actions.
* Revert "update Docker login for goreleaser-cross v1.19"
This reverts commit 4d19cf5342.
* Bump version to stable
* Revert "Merge pull request #435 from maticnetwork/POS-553"
This reverts commit 657d262def, reversing
changes made to 88dbfa1c13.
* revert change for release for go1.19
* Add default values to CLI helper and docs
This commit adds default values to CLI helper and docs. When the default value of a string flag, slice string flag, or map string flag is empty, its helper message won't show any default value.
* Add a summary of new CLI in docs
* Updating packager as binutils changed version so that apt-get installs current versions
* Add state pruning to new CLI
* Minor wording fix in prune state description
* Bumping control file versions
* Mainnet Delhi fork
* Set version to stable
* change delhi hardfork block number
* handle future chain import and skip peer drop (#650)
* handle future chain import and skip peer drop
* add block import metric
* params: bump version to v0.3.3-stable
* Bump bor version in control files for v0.3.3 mainnet release
* Added checks to RPC requests and introduced new flags to customise the parameters (#657)
* added a check to reject rpc requests with batch size > the one set using a newly added flag (rpcbatchlimit)
* added a check to reject rpc requests whose result size > the one set using a newly added flag (rpcreturndatalimit)
* updated the config files and docs
* chg : trieTimeout from 60 to 10 mins (#692)
* chg : trieTimeout from 60 to 10 mins
* chg : cache.timout to 10m from 1h in configs
* internal/cli/server : fix : added triesInMemory in config (#691)
* changed version from 0.3.0 to 0.3.4-beta (#693)
* fix nil state-sync issue, increase grpc limit (#695)
* Increase grpc message size limit in pprof
* consensus/bor/bor.go : stateSyncs init fixed [Fix#686]
* eth/filters: handle nil state-sync before notify
* eth/filters: update check
Co-authored-by: Jerry <jerrycgh@gmail.com>
Co-authored-by: Daniil <daniil.melnik@chainstack.com>
* core, tests/bor: add more tests for state-sync validation (#710)
* core: add get state sync function for tests
* tests/bor: add validation for state sync events post consensus
* Arpit/temp bor sync (#701)
* Increase grpc message size limit in pprof
* ReadBorReceipts improvements
* use internal function
* fix tests
* fetch geth upstread for ReadBorReceiptRLP
* Only query bor receipt when the query index is equal to # tx in block body
This change reduces the frequency of calling ReadBorReceipt and
ReadBorTransaction, which are CPU and db intensive.
* Revert "fetch geth upstread for ReadBorReceiptRLP"
This reverts commit 2e838a6b1313d26674f3a8df4b044e35dcbf35a0.
* Restore ReadBorReceiptRLP
* fix bor receipts
* remove unused
* fix lints
---------
Co-authored-by: Jerry <jerrycgh@gmail.com>
Co-authored-by: Manav Darji <manavdarji.india@gmail.com>
Co-authored-by: Evgeny Danienko <6655321@bk.ru>
* Revert "chg : trieTimeout from 60 to 10 mins (#692)" (#720)
This reverts commit 241843c7e7.
* Arpit/add execution pool 2 (#719)
* initial
* linters
* linters
* remove timeout
* update pool
* change pool size function
* check nil
* check nil
* fix tests
* Use execution pool from server in all handlers
* simplify things
* test fix
* add support for cli, config
* add to cli and config
* merge base branch
* debug statements
* fix bug
* atomic pointer timeout
* add apis
* update workerpool
* fix issues
* change params
* fix issues
* fix ipc issue
* remove execution pool from IPC
* revert
* fix tests
* mutex
* refactor flag and value names
* ordering fix
* refactor flag and value names
* update default ep size to 40
* fix bor start issues
* revert file changes
* debug statements
* fix bug
* update workerpool
* atomic pointer timeout
* add apis
* Merge branch 'add-execution-pool' of github.com:maticnetwork/bor into arpit/add-execution-pool
* fix issues
* change params
* fix issues
* fix ipc issue
* remove execution pool from IPC
* revert
* merge base branch
* Merge branch 'add-execution-pool' of github.com:maticnetwork/bor into arpit/add-execution-pool
* mutex
* fix tests
* Merge branch 'arpit/add-execution-pool' of github.com:maticnetwork/bor into arpit/add-execution-pool
* Change default size of execution pool to 40
* refactor flag and value names
* fix merge conflicts
* ordering fix
* refactor flag and value names
* update default ep size to 40
* fix bor start issues
* revert file changes
* fix linters
* fix go.mod
* change sec to ms
* change default value for ep timeout
* fix node api calls
* comment setter for ep timeout
---------
Co-authored-by: Evgeny Danienko <6655321@bk.ru>
Co-authored-by: Jerry <jerrycgh@gmail.com>
Co-authored-by: Manav Darji <manavdarji.india@gmail.com>
* version change (#721)
* Event based pprof (#732)
* feature
* Save pprof to /tmp
---------
Co-authored-by: Jerry <jerrycgh@gmail.com>
* Cherry-pick changes from develop (#738)
* Check if block is nil to prevent panic (#736)
* miner: use env for tracing instead of block object (#728)
---------
Co-authored-by: Dmitry <46797839+dkeysil@users.noreply.github.com>
* add max code init size check in txpool (#739)
* Revert "Event based pprof" and update version (#742)
* Revert "Event based pprof (#732)"
This reverts commit 22fa4033e8.
* params: update version to 0.3.4-beta3
* packaging/templates: update bor version
* internal/ethapi :: Fix : newRPCTransactionFromBlockIndex
* Merge master to qa (#813)
* Merge qa to master (#750)
* Added checks to RPC requests and introduced new flags to customise the parameters (#657)
* added a check to reject rpc requests with batch size > the one set using a newly added flag (rpcbatchlimit)
* added a check to reject rpc requests whose result size > the one set using a newly added flag (rpcreturndatalimit)
* updated the config files and docs
* chg : trieTimeout from 60 to 10 mins (#692)
* chg : trieTimeout from 60 to 10 mins
* chg : cache.timout to 10m from 1h in configs
* internal/cli/server : fix : added triesInMemory in config (#691)
* changed version from 0.3.0 to 0.3.4-beta (#693)
* fix nil state-sync issue, increase grpc limit (#695)
* Increase grpc message size limit in pprof
* consensus/bor/bor.go : stateSyncs init fixed [Fix#686]
* eth/filters: handle nil state-sync before notify
* eth/filters: update check
Co-authored-by: Jerry <jerrycgh@gmail.com>
Co-authored-by: Daniil <daniil.melnik@chainstack.com>
* core, tests/bor: add more tests for state-sync validation (#710)
* core: add get state sync function for tests
* tests/bor: add validation for state sync events post consensus
* Arpit/temp bor sync (#701)
* Increase grpc message size limit in pprof
* ReadBorReceipts improvements
* use internal function
* fix tests
* fetch geth upstread for ReadBorReceiptRLP
* Only query bor receipt when the query index is equal to # tx in block body
This change reduces the frequency of calling ReadBorReceipt and
ReadBorTransaction, which are CPU and db intensive.
* Revert "fetch geth upstread for ReadBorReceiptRLP"
This reverts commit 2e838a6b1313d26674f3a8df4b044e35dcbf35a0.
* Restore ReadBorReceiptRLP
* fix bor receipts
* remove unused
* fix lints
---------
Co-authored-by: Jerry <jerrycgh@gmail.com>
Co-authored-by: Manav Darji <manavdarji.india@gmail.com>
Co-authored-by: Evgeny Danienko <6655321@bk.ru>
* Revert "chg : trieTimeout from 60 to 10 mins (#692)" (#720)
This reverts commit 241843c7e7.
* Arpit/add execution pool 2 (#719)
* initial
* linters
* linters
* remove timeout
* update pool
* change pool size function
* check nil
* check nil
* fix tests
* Use execution pool from server in all handlers
* simplify things
* test fix
* add support for cli, config
* add to cli and config
* merge base branch
* debug statements
* fix bug
* atomic pointer timeout
* add apis
* update workerpool
* fix issues
* change params
* fix issues
* fix ipc issue
* remove execution pool from IPC
* revert
* fix tests
* mutex
* refactor flag and value names
* ordering fix
* refactor flag and value names
* update default ep size to 40
* fix bor start issues
* revert file changes
* debug statements
* fix bug
* update workerpool
* atomic pointer timeout
* add apis
* Merge branch 'add-execution-pool' of github.com:maticnetwork/bor into arpit/add-execution-pool
* fix issues
* change params
* fix issues
* fix ipc issue
* remove execution pool from IPC
* revert
* merge base branch
* Merge branch 'add-execution-pool' of github.com:maticnetwork/bor into arpit/add-execution-pool
* mutex
* fix tests
* Merge branch 'arpit/add-execution-pool' of github.com:maticnetwork/bor into arpit/add-execution-pool
* Change default size of execution pool to 40
* refactor flag and value names
* fix merge conflicts
* ordering fix
* refactor flag and value names
* update default ep size to 40
* fix bor start issues
* revert file changes
* fix linters
* fix go.mod
* change sec to ms
* change default value for ep timeout
* fix node api calls
* comment setter for ep timeout
---------
Co-authored-by: Evgeny Danienko <6655321@bk.ru>
Co-authored-by: Jerry <jerrycgh@gmail.com>
Co-authored-by: Manav Darji <manavdarji.india@gmail.com>
* version change (#721)
* Event based pprof (#732)
* feature
* Save pprof to /tmp
---------
Co-authored-by: Jerry <jerrycgh@gmail.com>
* Cherry-pick changes from develop (#738)
* Check if block is nil to prevent panic (#736)
* miner: use env for tracing instead of block object (#728)
---------
Co-authored-by: Dmitry <46797839+dkeysil@users.noreply.github.com>
* add max code init size check in txpool (#739)
* Revert "Event based pprof" and update version (#742)
* Revert "Event based pprof (#732)"
This reverts commit 22fa4033e8.
* params: update version to 0.3.4-beta3
* packaging/templates: update bor version
* params, packaging/templates: update bor version
---------
Co-authored-by: SHIVAM SHARMA <shivam691999@gmail.com>
Co-authored-by: Pratik Patil <pratikspatil024@gmail.com>
Co-authored-by: Jerry <jerrycgh@gmail.com>
Co-authored-by: Daniil <daniil.melnik@chainstack.com>
Co-authored-by: Arpit Temani <temaniarpit27@gmail.com>
Co-authored-by: Evgeny Danienko <6655321@bk.ru>
Co-authored-by: Dmitry <46797839+dkeysil@users.noreply.github.com>
* core, miner: add sub-spans for tracing (#753)
* core, miner: add sub-spans for tracing
* fix linters
* core: add logs for debugging
* core: add more logs to print tdd while reorg
* fix linters
* core: minor fix
* core: remove debug logs
* core: use different span for write block and set head
* core: use internal context for sending traces (#755)
* core: add : impossible reorg block dump (#754)
* add : impossible reorg block dump
* chg : 3 seperate files for impossoble reorg dump
* add : use exportBlocks method and RLP blocks before writing
* chg : small changes
* bump : go version from 1.19 to 1.20.1 (#761)
* Revert "bump : go version from 1.19 to 1.20.1 (#761)"
This reverts commit 4561012af9.
* core/vm: use optimized bigint (#26021)
* Add holiman/big
* Fix linter
* Bump version to v0.3.5
* fix lints from develop (few lints decided to appear from code that was untouched, weird)
* upgrade crypto lib version (#770)
* bump dep : github.com/Masterminds/goutils to v1.1.1 (#769)
* mardizzone/pos-1313: bump crypto dependency (#772)
* dev: chg: bumd net dependency
* dev: chg: bump crypto dependency
* dev: chg: bump crypto dependency
* bump dep : golang.org/x/net to v0.8.0 (#771)
* Verify validator set against local contract on receiving an end-of-sprint block (#768)
* Verify validator set against local contract on receiving an end-of-sprint block
* Fix tests
* Respect error returned by ParseValidators
* Keep going back until a parent block presents
* core/txpool: implement DoS defenses from geth (#778)
* Hotfixes and deps bump (#776)
* dev: chg: bump deps
* internal/cli/server, rpc: lower down http readtimeout to 10s
* dev: chg: get p2p adapter
* dev: chg: lower down jsonrpc readtimeout to 10s
* cherry-pick txpool optimisation changes
* add check for empty lists in txpool (#704)
* add check
* linters
* core, miner: add empty instrumentation name for tracing
---------
Co-authored-by: Raneet Debnath <raneetdebnath10@gmail.com>
Co-authored-by: SHIVAM SHARMA <shivam691999@gmail.com>
Co-authored-by: Evgeny Danilenko <6655321@bk.ru>
Co-authored-by: Manav Darji <manavdarji.india@gmail.com>
* packaging,params: bump to v0.3.6 (#782)
* v0.3.6 fix (#787)
* Fix get validator set in header verifier
* chg : commit tx logs from info to debug (#673)
* chg : commit tx logs from info to debug
* fix : minor changes
* chg : miner : commitTransactions-stats moved from info to debug
* lint : fix linters
* refactor logging
* miner : chg : UnauthorizedSignerError to debug
* lint : fix lint
* fix : log.Logger interface compatibility
---------
Co-authored-by: Evgeny Danienko <6655321@bk.ru>
* Remove unnecessary sorting of valset from header in verification
* dev: chg: version bump
---------
Co-authored-by: SHIVAM SHARMA <shivam691999@gmail.com>
Co-authored-by: Evgeny Danienko <6655321@bk.ru>
Co-authored-by: marcello33 <marcelloardizzone@hotmail.it>
* core: improve locks in txpool (#807)
* added a write lock to the txs.filter method and a read lock to the txs.reheap method - both of which are called by Filter during reorg adjustments to txpool
* txpool reorg locks
* more locks
* locks
* linters
* params, packaging: update version for v0.3.8-beta release
* core: add logs in reheap
---------
Co-authored-by: Alex <dalexwatts@gmail.com>
Co-authored-by: Evgeny Danienko <6655321@bk.ru>
* Merge qa to master (#808)
* Added checks to RPC requests and introduced new flags to customise the parameters (#657)
* added a check to reject rpc requests with batch size > the one set using a newly added flag (rpcbatchlimit)
* added a check to reject rpc requests whose result size > the one set using a newly added flag (rpcreturndatalimit)
* updated the config files and docs
* chg : trieTimeout from 60 to 10 mins (#692)
* chg : trieTimeout from 60 to 10 mins
* chg : cache.timout to 10m from 1h in configs
* internal/cli/server : fix : added triesInMemory in config (#691)
* changed version from 0.3.0 to 0.3.4-beta (#693)
* fix nil state-sync issue, increase grpc limit (#695)
* Increase grpc message size limit in pprof
* consensus/bor/bor.go : stateSyncs init fixed [Fix#686]
* eth/filters: handle nil state-sync before notify
* eth/filters: update check
Co-authored-by: Jerry <jerrycgh@gmail.com>
Co-authored-by: Daniil <daniil.melnik@chainstack.com>
* core, tests/bor: add more tests for state-sync validation (#710)
* core: add get state sync function for tests
* tests/bor: add validation for state sync events post consensus
* Arpit/temp bor sync (#701)
* Increase grpc message size limit in pprof
* ReadBorReceipts improvements
* use internal function
* fix tests
* fetch geth upstread for ReadBorReceiptRLP
* Only query bor receipt when the query index is equal to # tx in block body
This change reduces the frequency of calling ReadBorReceipt and
ReadBorTransaction, which are CPU and db intensive.
* Revert "fetch geth upstread for ReadBorReceiptRLP"
This reverts commit 2e838a6b1313d26674f3a8df4b044e35dcbf35a0.
* Restore ReadBorReceiptRLP
* fix bor receipts
* remove unused
* fix lints
---------
Co-authored-by: Jerry <jerrycgh@gmail.com>
Co-authored-by: Manav Darji <manavdarji.india@gmail.com>
Co-authored-by: Evgeny Danienko <6655321@bk.ru>
* Revert "chg : trieTimeout from 60 to 10 mins (#692)" (#720)
This reverts commit 241843c7e7.
* Arpit/add execution pool 2 (#719)
* initial
* linters
* linters
* remove timeout
* update pool
* change pool size function
* check nil
* check nil
* fix tests
* Use execution pool from server in all handlers
* simplify things
* test fix
* add support for cli, config
* add to cli and config
* merge base branch
* debug statements
* fix bug
* atomic pointer timeout
* add apis
* update workerpool
* fix issues
* change params
* fix issues
* fix ipc issue
* remove execution pool from IPC
* revert
* fix tests
* mutex
* refactor flag and value names
* ordering fix
* refactor flag and value names
* update default ep size to 40
* fix bor start issues
* revert file changes
* debug statements
* fix bug
* update workerpool
* atomic pointer timeout
* add apis
* Merge branch 'add-execution-pool' of github.com:maticnetwork/bor into arpit/add-execution-pool
* fix issues
* change params
* fix issues
* fix ipc issue
* remove execution pool from IPC
* revert
* merge base branch
* Merge branch 'add-execution-pool' of github.com:maticnetwork/bor into arpit/add-execution-pool
* mutex
* fix tests
* Merge branch 'arpit/add-execution-pool' of github.com:maticnetwork/bor into arpit/add-execution-pool
* Change default size of execution pool to 40
* refactor flag and value names
* fix merge conflicts
* ordering fix
* refactor flag and value names
* update default ep size to 40
* fix bor start issues
* revert file changes
* fix linters
* fix go.mod
* change sec to ms
* change default value for ep timeout
* fix node api calls
* comment setter for ep timeout
---------
Co-authored-by: Evgeny Danienko <6655321@bk.ru>
Co-authored-by: Jerry <jerrycgh@gmail.com>
Co-authored-by: Manav Darji <manavdarji.india@gmail.com>
* version change (#721)
* Event based pprof (#732)
* feature
* Save pprof to /tmp
---------
Co-authored-by: Jerry <jerrycgh@gmail.com>
* Cherry-pick changes from develop (#738)
* Check if block is nil to prevent panic (#736)
* miner: use env for tracing instead of block object (#728)
---------
Co-authored-by: Dmitry <46797839+dkeysil@users.noreply.github.com>
* add max code init size check in txpool (#739)
* Revert "Event based pprof" and update version (#742)
* Revert "Event based pprof (#732)"
This reverts commit 22fa4033e8.
* params: update version to 0.3.4-beta3
* packaging/templates: update bor version
* internal/ethapi :: Fix : newRPCTransactionFromBlockIndex
* fix: remove assignment for bor receipt
---------
Co-authored-by: SHIVAM SHARMA <shivam691999@gmail.com>
Co-authored-by: Pratik Patil <pratikspatil024@gmail.com>
Co-authored-by: Jerry <jerrycgh@gmail.com>
Co-authored-by: Daniil <daniil.melnik@chainstack.com>
Co-authored-by: Arpit Temani <temaniarpit27@gmail.com>
Co-authored-by: Evgeny Danienko <6655321@bk.ru>
Co-authored-by: Dmitry <46797839+dkeysil@users.noreply.github.com>
* Setting up bor to use hosted 18.04 runner as ubuntu provided 18.04 runner is end of life
---------
Co-authored-by: SHIVAM SHARMA <shivam691999@gmail.com>
Co-authored-by: Pratik Patil <pratikspatil024@gmail.com>
Co-authored-by: Jerry <jerrycgh@gmail.com>
Co-authored-by: Daniil <daniil.melnik@chainstack.com>
Co-authored-by: Arpit Temani <temaniarpit27@gmail.com>
Co-authored-by: Evgeny Danienko <6655321@bk.ru>
Co-authored-by: Dmitry <46797839+dkeysil@users.noreply.github.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: marcello33 <marcelloardizzone@hotmail.it>
Co-authored-by: Raneet Debnath <raneetdebnath10@gmail.com>
Co-authored-by: Raneet Debnath <35629432+Raneet10@users.noreply.github.com>
Co-authored-by: Alex <dalexwatts@gmail.com>
Co-authored-by: Daniel Jones <djones@polygon.technology>
* core: remove duplicate tests
* miner: use get validators by hash in tests
---------
Co-authored-by: Daniel Jones <djones@polygon.technology>
Co-authored-by: Will Button <wbutton@polygon.technology>
Co-authored-by: Will Button <will@willbutton.com>
Co-authored-by: Daniel Jones <105369507+djpolygon@users.noreply.github.com>
Co-authored-by: Pratik Patil <pratikspatil024@gmail.com>
Co-authored-by: Arpit Temani <temaniarpit27@gmail.com>
Co-authored-by: Jerry <jerrycgh@gmail.com>
Co-authored-by: SHIVAM SHARMA <shivam691999@gmail.com>
Co-authored-by: Daniil <daniil.melnik@chainstack.com>
Co-authored-by: Evgeny Danienko <6655321@bk.ru>
Co-authored-by: Dmitry <46797839+dkeysil@users.noreply.github.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: marcello33 <marcelloardizzone@hotmail.it>
Co-authored-by: Raneet Debnath <raneetdebnath10@gmail.com>
Co-authored-by: Raneet Debnath <35629432+Raneet10@users.noreply.github.com>
Co-authored-by: Alex <dalexwatts@gmail.com>
* eth: cmd: deprecate personal namespace
* eth: cmd: move deprecation to node
* node: disable toml of enablepersonal
* node: disable personal on ipc as well
* Update node/node.go
Co-authored-by: Martin Holst Swende <martin@swende.se>
* console: error -> warn
* node: less roulette
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
This changes the node setup to ignore datadir files
static-nodes.json
trusted-nodes.json
When these files are present, it an error will be printed to the log.
This adds a generic mechanism for 'dial options' in the RPC client,
and also implements a specific dial option for the JWT authentication
mechanism used by the engine API. Some real tests for the server-side
authentication handling are also added.
Co-authored-by: Joshua Gutow <jgutow@optimism.io>
Co-authored-by: Felix Lange <fjl@twurst.com>
* merge geth v1.10.15
* fix: Removed FastSync from cli server
* fix: TestHeadersRLPStorage
* Added t.skip(ETH2 in bor)
* fix: flow in create consensus engine
* bumped version
* Fix typo
* increase block time
* remove file
* bumped version
* merge gethv1.10.17
* bumped version
* fix failing tests
* Bump Go version to v1.18 (#368)
* Bump Go version to v1.18.1
* Build using netgo tag
This will create a static build using Go native networking stack.
Checked and it works stable for all archs and distros.
* Fix meta
* Bump version
* Meta as stable
Co-authored-by: Shivam Sharma <shivam691999@gmail.com>
Co-authored-by: Manav Darji <manavdarji.india@gmail.com>
Co-authored-by: Sandeep Sreenath <sandeep.sreenath@gmail.com>
Co-authored-by: Victor Castell <victor@victorcastell.com>
* core/beacon: eth/catalyst: updated engine api to new version
* core: implement exchangeTransitionConfig
* core/beacon: prevRandao instead of Random
* eth/catalyst: Fix ExchangeTransitionConfig, add test
* eth/catalyst: stop external miners on TTD reached
* node: implement --authrpc.vhosts flag
* core: allow for config override on non-mainnet networks
* eth/catalyst: fix peters comments
* eth/catalyst: make stop remote sealer more explicit
* eth/catalyst: add log output
* cmd/utils: rename authrpc.host to authrpc.addr
* eth/catalyst: disable the disabling of the miner
* eth: core: remove notion of terminal pow block
* eth: les: more of peters nitpicks
* rpc, node: refactor request validation and add jwt validation
* node, rpc: fix error message, ignore engine api in RegisterAPIs
* node: make authenticated port configurable
* eth/catalyst: enable unauthenticated version of engine api
* node: rework obtainjwtsecret (backport later)
* cmd/geth: added auth port flag
* node: happy lint, happy life
* node: refactor authenticated api
Modifies the authentication mechanism to use default values
* node: trim spaces and newline away from secret
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This change allows users to set a custom path prefix on which to mount the http-rpc
or ws-rpc handlers via the new flags --http.rpcprefix and --ws.rpcprefix.
Fixes#21826
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR significantly changes the APIs for instantiating Ethereum nodes in
a Go program. The new APIs are not backwards-compatible, but we feel that
this is made up for by the much simpler way of registering services on
node.Node. You can find more information and rationale in the design
document: https://gist.github.com/renaynay/5bec2de19fde66f4d04c535fd24f0775.
There is also a new feature in Node's Go API: it is now possible to
register arbitrary handlers on the user-facing HTTP server. In geth, this
facility is used to enable GraphQL.
There is a single minor change relevant for geth users in this PR: The
GraphQL API is no longer available separately from the JSON-RPC HTTP
server. If you want GraphQL, you need to enable it using the
./geth --http --graphql flag combination.
The --graphql.port and --graphql.addr flags are no longer available.
Rather than just closing the underlying network listener to stop our
HTTP servers, use the graceful shutdown procedure, waiting for any
in-process requests to finish.
This change makes it possible to run geth with JSON-RPC over HTTP and
WebSocket on the same TCP port. The default port for WebSocket
is still 8546.
geth --rpc --rpcport 8545 --ws --wsport 8545
This also removes a lot of deprecated API surface from package rpc.
The rpc package is now purely about serving JSON-RPC and no longer
provides a way to start an HTTP server.
* node: expose config in service context
* eth: integrate p2p/dnsdisc
* cmd/geth: add some DNS flags
* eth: remove DNS URLs
* cmd/utils: configure DNS names for testnets
* params: update DNS URLs
* cmd/geth: configure mainnet DNS
* cmd/utils: rename DNS flag and fix flag processing
* cmd/utils: remove debug print
* node: fix test
* node: close AccountsManager in new Close method
* p2p/simulations, p2p/simulations/adapters: handle node close on shutdown
* node: move node ephemeralKeystore cleanup to stop method
* node: call Stop in Node.Close method
* cmd/geth: close node.Node created with makeFullNode in cli commands
* node: close Node instances in tests
* cmd/geth, node: minor code style fixes
* cmd, console, miner, mobile: proper node Close() termination
This fixes a rare deadlock with the inproc adapter:
- A node is stopped, which acquires Network.lock.
- The protocol code being simulated (swarm/network in my case)
waits for its goroutines to shut down.
- One of those goroutines calls into the simulation to add a peer,
which waits for Network.lock.
The fix for the deadlock is really simple, just release the lock
before stopping the simulation node.
Other changes in this PR clean up the exec adapter so it reports
node startup errors better and remove the docker adapter because
it just adds overhead.
In the exec adapter, node information is now posted to a one-shot
server. This avoids log parsing and allows reporting startup
errors to the simulation host.
A small change in package node was needed because simulation
nodes use port zero. Node.{HTTP,WS}Endpoint now return the live
endpoints after startup by checking the TCP listener.
* rpc: Make HTTP server timeout values configurable
* rpc: Remove flags for setting HTTP Timeouts, configuring via .toml is sufficient.
* rpc: Replace separate constants with a single default struct.
* rpc: Update HTTP Server Read and Write Timeouts to 30s.
* rpc: Remove redundant NewDefaultHTTPTimeouts function.
* rpc: document HTTPTimeouts.
* rpc: sanitize timeout values for library use
