I added the history mode configuration in eth/ethconfig initially, since
it seemed like the logical place. But it turns out we need access to the
intended pruning setting at a deeper level, and it actually needs to be
integrated with the blockchain startup procedure.
With this change applied, if a node previously had its history pruned,
and is subsequently restarted **without** the `--history.chain
postmerge` flag, the `BlockChain` initialization code will now verify
the freezer tail against the known pruning point of the predefined
network and will restore pruning status. Note that this logic is quite
restrictive, we allow non-zero tail only for known networks, and only
for the specific pruning point that is defined.
This PR adds a new `--beacon.checkpoint.file` config flag to geth and
blsync which specifies a checkpoint import/export file. If a file with
an existing checkpoint is specified, it is used for initialization
instead of the hardcoded one (except when `--beacon.checkpoint` is also
specified simultaneously). Whenever the client encounters a new valid
finality update with a suitable finalized beacon block root at an epoch
boundary, it saves the block root in hex format to the checkpoint file.
This pull request introduces new sync logic for pruning mode. The downloader will now skip
insertion of block bodies and receipts before the configured history cutoff point.
Originally, in snap sync, the header chain and other components (bodies and receipts) were
inserted separately. However, in Proof-of-Stake, this separation is unnecessary since the
sync target is already verified by the CL.
To simplify the process, this pull request modifies `InsertReceiptChain` to insert headers
along with block bodies and receipts together. Besides, `InsertReceiptChain` doesn't have
the notion of reorg, as the common ancestor is always be found before the sync and extra
side chain is truncated at the beginning if they fall in the ancient store. The stale
canonical chain flags will always be rewritten by the new chain. Explicit reorg logic is
no longer required in `InsertReceiptChain`.
This adds a new subcommand 'geth prune-history' that removes the pre-merge history
on supported networks. Geth is not fully ready to work in this mode, please do not run
this command on your production node.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
this adds 2 features to improve `geth --dev` experience.
1. we don't need to use `dev_SetFeeRecipient` to set initial coinbase
address. it was a pain.
2. we don't need to unlock keystore if we don't use it. we had it
because of clique.
Here I am adding a config option and geth flag (`--history.chain`) for
configuring history pruning. There are two options available:
- `--history.chain all` is the default and will keep all history like
before.
- `--history.chain postmerge` will configure the history cutoff point to
the merge block.
The option doesn't actually do anything right now, but we need it as a
precursor for other history pruning changes.
When I press Ctrl-C during the import of multiple files, the import
process will still attempt to import the subsequent files. However, in
normal circumstances, users would expect the import to stop immediately
upon pressing Ctrl-C.
And because the current file was not finished importing, subsequent
import tasks often fail due to an `unknown ancestor` error.
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This pull request delivers the new version of the state history, where
the raw storage key is used instead of the hash.
Before the cancun fork, it's supported by protocol to destruct a
specific account and therefore, all the storage slot owned by it should
be wiped in the same transition.
Technically, storage wiping should be performed through storage
iteration, and only the storage key hash will be available for traversal
if the state snapshot is not available. Therefore, the storage key hash
is chosen as the identifier in the old version state history.
Fortunately, account self-destruction has been deprecated by the
protocol since the Cancun fork, and there are no empty accounts eligible
for deletion under EIP-158. Therefore, we can conclude that no storage
wiping should occur after the Cancun fork. In this case, it makes no
sense to keep using hash.
Besides, another big reason for making this change is the current format
state history is unusable if verkle is activated. Verkle tree has a
different key derivation scheme (merkle uses keccak256), the preimage of
key hash must be provided in order to make verkle rollback functional.
This pull request is a prerequisite for landing verkle.
Additionally, the raw storage key is more human-friendly for those who
want to manually check the history, even though Solidity already
performs some hashing to derive the storage location.
---
This pull request doesn't bump the database version, as I believe the
database should still be compatible if users degrade from the new geth
version to old one, the only side effect is the persistent new version
state history will be unusable.
---------
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
This pull request refactors the genesis setup function, the major
changes are highlighted here:
**(a) Triedb is opened in verkle mode if `EnableVerkleAtGenesis` is
configured in chainConfig or the database has been initialized previously with
`EnableVerkleAtGenesis` configured**.
A new config field `EnableVerkleAtGenesis` has been added in the
chainConfig. This field must be configured with True if Geth wants to initialize
the genesis in Verkle mode.
In the verkle devnet-7, the verkle transition is activated at genesis.
Therefore, the verkle rules should be used since the genesis. In production
networks (mainnet and public testnets), verkle activation always occurs after
the genesis block. Therefore, this flag is only made for devnet and should be
deprecated later. Besides, verkle transition at non-genesis block hasn't been
implemented yet, it should be done in the following PRs.
**(b) The genesis initialization condition has been simplified**
There is a special mode supported by the Geth is that: Geth can be
initialized with an existing chain segment, which can fasten the node sync
process by retaining the chain freezer folder.
Originally, if the triedb is regarded as uninitialized and the genesis block can
be found in the chain freezer, the genesis block along with genesis state will be
committed. This condition has been simplified to checking the presence of chain
config in key-value store. The existence of chain config can represent the genesis
has been committed.
This PR modifies how the metrics library handles `Enabled`: previously,
the package `init` decided whether to serve real metrics or just
dummy-types.
This has several drawbacks:
- During pkg init, we need to determine whether metrics are enabled or
not. So we first hacked in a check if certain geth-specific
commandline-flags were enabled. Then we added a similar check for
geth-env-vars. Then we almost added a very elaborate check for
toml-config-file, plus toml parsing.
- Using "real" types and dummy types interchangeably means that
everything is hidden behind interfaces. This has a performance penalty,
and also it just adds a lot of code.
This PR removes the interface stuff, uses concrete types, and allows for
the setting of Enabled to happen later. It is still assumed that
`metrics.Enable()` is invoked early on.
The somewhat 'heavy' operations, such as ticking meters and exp-decay,
now checks the enable-flag to prevent resource leak.
The change may be large, but it's mostly pretty trivial, and from the
last time I gutted the metrics, I ensured that we have fairly good test
coverage.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This is one further step towards removing account management from
`geth`. This PR deprecates the flag `unlock`, and makes the flag moot:
unlock via geth is no longer possible.
This PR moves chain config related code (config file processing, fork
logic, network defaults) from `beacon/types` and `beacon/blsync` into
`beacon/params` while the command line flag logic of the chain config is
moved into `cmd/utils`, thereby removing the cli dependencies from
package `beacon` and its sub-packages.
This PR is a first step towards removing account management from geth,
and contains a lot of the user-facing changes.
With this PR, the `personal` namespace disappears. **Note**: `personal`
namespace has been deprecated for quite some time (since
https://github.com/ethereum/go-ethereum/pull/26390 1 year and 8 months
ago), and users who have wanted to use it has been forced to used the
flag `--rpc.enabledeprecatedpersonal`. So I think it's fairly
non-controversial to drop it at this point.
Specifically, this means:
- Account/wallet listing
-`personal.getListAccounts`
-`personal.listAccounts`
-`personal.getListWallets`
-`personal.listWallets`
- Lock/unlock
-`personal.lockAccount`
-`personal.openWallet`
-`personal.unlockAccount`
- Sign ops
-`personal.sign`
-`personal.sendTransaction`
-`personal.signTransaction`
- Imports / inits
-`personal.deriveAccount`
-`personal.importRawKey`
-`personal.initializeWallet`
-`personal.newAccount`
-`personal.unpair`
- Other:
-`personal.ecRecover`
The underlying keystores and account managent code is still in place,
which means that `geth --dev` still works as expected, so that e.g. the
example below still works:
```
> eth.sendTransaction({data:"0x6060", value: 1, from:eth.accounts[0]})
```
Also, `ethkey` and `clef` are untouched.
With the removal of `personal`, as far as I know we have no more API
methods which contain credentials, and if we want to implement
logging-capabilities of RPC ingress payload, it would be possible after
this.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
rebased https://github.com/ethereum/go-ethereum/pull/29766 . The
downstream branch appears to have been deleted and I don't have perms to
push to that fork.
`TerminalTotalDifficultyPassed` is removed. `TerminalTotalDifficulty`
must now be non-nil, and it is expected that networks are already
merged: we can only import PoW/Clique chains, not produce blocks on
them.
---------
Co-authored-by: stevemilk <wangpeculiar@gmail.com>
Changelog: https://golangci-lint.run/product/changelog/#1610
Removes `exportloopref` (no longer needed), replaces it with
`copyloopvar` which is basically the opposite.
Also adds:
- `durationcheck`
- `gocheckcompilerdirectives`
- `reassign`
- `mirror`
- `tenv`
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This PR integrates witness-enabled block production, witness-creating
payload execution and stateless cross-validation into the `engine` API.
The purpose of the PR is to enable the following use-cases (for API
details, please see next section):
- Cross validating locally created blocks:
- Call `forkchoiceUpdatedWithWitness` instead of `forkchoiceUpdated` to
trigger witness creation too.
- Call `getPayload` as before to retrieve the new block and also the
above created witness.
- Call `executeStatelessPayload` against another client to
cross-validate the block.
- Cross validating locally processed blocks:
- Call `newPayloadWithWitness` instead of `newPayload` to trigger
witness creation too.
- Call `executeStatelessPayload` against another client to
cross-validate the block.
- Block production for stateless clients (local or MEV builders):
- Call `forkchoiceUpdatedWithWitness` instead of `forkchoiceUpdated` to
trigger witness creation too.
- Call `getPayload` as before to retrieve the new block and also the
above created witness.
- Propagate witnesses across the consensus libp2p network for stateless
Ethereum.
- Stateless validator validation:
- Call `executeStatelessPayload` with the propagated witness to
statelessly validate the block.
*Note, the various `WithWitness` methods could also *just be* an
additional boolean flag on the base methods, but this PR wanted to keep
the methods separate until a final consensus is reached on how to
integrate in production.*
---
The following `engine` API types are introduced:
```go
// StatelessPayloadStatusV1 is the result of a stateless payload execution.
type StatelessPayloadStatusV1 struct {
Status string `json:"status"`
StateRoot common.Hash `json:"stateRoot"`
ReceiptsRoot common.Hash `json:"receiptsRoot"`
ValidationError *string `json:"validationError"`
}
```
- Add `forkchoiceUpdatedWithWitnessV1,2,3` with same params and returns
as `forkchoiceUpdatedV1,2,3`, but triggering a stateless witness
building if block production is requested.
- Extend `getPayloadV2,3` to return `executionPayloadEnvelope` with an
additional `witness` field of type `bytes` iff created via
`forkchoiceUpdatedWithWitnessV2,3`.
- Add `newPayloadWithWitnessV1,2,3,4` with same params and returns as
`newPayloadV1,2,3,4`, but triggering a stateless witness creation during
payload execution to allow cross validating it.
- Extend `payloadStatusV1` with a `witness` field of type `bytes` if
returned by `newPayloadWithWitnessV1,2,3,4`.
- Add `executeStatelessPayloadV1,2,3,4` with same base params as
`newPayloadV1,2,3,4` and one more additional param (`witness`) of type
`bytes`. The method returns `statelessPayloadStatusV1`, which mirrors
`payloadStatusV1` but replaces `latestValidHash` with `stateRoot` and
`receiptRoot`.
This pull request introduces a state.Reader interface for state
accessing.
The interface could be implemented in various ways. It can be pure trie
only reader, or the combination of trie and state snapshot. What's more,
this interface allows us to have more flexibility in the future, e.g.
the
archive reader (for accessing archive state).
Additionally, this pull request removes the following metrics
- `chain/snapshot/account/reads`
- `chain/snapshot/storage/reads`
* cmd/geth, ethdb/pebble: polish method naming and code comment
* implement db stat for pebble
* cmd, core, ethdb, internal, trie: remove db property selector
* cmd, core, ethdb: fix function description
---------
Co-authored-by: prpeh <prpeh@proton.me>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Here we add a Go API for running tracing plugins within the main block import process.
As an advanced user of geth, you can now create a Go file in eth/tracers/live/, and within
that file register your custom tracer implementation. Then recompile geth and select your tracer
on the command line. Hooks defined in the tracer will run whenever a block is processed.
The hook system is defined in package core/tracing. It uses a struct with callbacks, instead of
requiring an interface, for several reasons:
- We plan to keep this API stable long-term. The core/tracing hook API does not depend on
on deep geth internals.
- There are a lot of hooks, and tracers will only need some of them. Using a struct allows you
to implement only the hooks you want to actually use.
All existing tracers in eth/tracers/native have been rewritten to use the new hook system.
This change breaks compatibility with the vm.EVMLogger interface that we used to have.
If you are a user of vm.EVMLogger, please migrate to core/tracing, and sorry for breaking
your stuff. But we just couldn't have both the old and new tracing APIs coexist in the EVM.
---------
Co-authored-by: Matthieu Vachon <matthieu.o.vachon@gmail.com>
Co-authored-by: Delweng <delweng@gmail.com>
Co-authored-by: Martin HS <martin@swende.se>
This pull request introduces a database tool for inspecting the state history.
It can be used for either account history or storage slot history, within a
specific block range.
The state output format can be chosen either with
- the "rlp-encoded" values (those inserted into the merkle trie)
- the "rlp-decoded" value (the raw state value)
The latter one needs --raw flag.
This adds support for the Deneb beacon chain fork, and fork handling
in general, to the beacon chain light client implementation.
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
Here we add a beacon chain light client for use by geth.
Geth can now be configured to run against a beacon chain API endpoint,
without pointing a CL to it. To set this up, use the `--beacon.api` flag. Information
provided by the beacon chain is verified, i.e. geth does not blindly trust the beacon
API endpoint in this mode. The root of trust are the beacon chain 'sync committees'.
The configured beacon API endpoint must provide light client data. At this time, only
Lodestar and Nimbus provide the necessary APIs.
There is also a standalone tool, cmd/blsync, which uses the beacon chain light client
to drive any EL implementation via its engine API.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
* miner: untangle miner
* miner: use common.hash instead of *types.header
* cmd/geth: deprecate --mine
* eth: get rid of most miner api
* console: get rid of coinbase in welcome message
* miner/stress: get rid of the miner stress test
* eth: get rid of miner.setEtherbase
* ethstats: remove miner and hashrate flags
* ethstats: remove miner and hashrate flags
* cmd: rename pendingBlockProducer to miner.pending.feeRecipient flag
* miner: use pendingFeeRecipient instead of etherbase
* miner: add mutex to protect the pending block
* miner: add mutex to protect the pending block
* eth: get rid of etherbase mentions
* miner: no need to lock the coinbase
* eth, miner: fix linter
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* eth: drop support for forward sync triggers and head block packets
* consensus, eth: enforce always merged network
* eth: fix tx looper startup and shutdown
* cmd, core: fix some tests
* core: remove notion of future blocks
* core, eth: drop unused methods and types
* all: implement era format, add history importer/export
* internal/era/e2store: refactor e2store to provide ReadAt interface
* internal/era/e2store: export HeaderSize
* internal/era: refactor era to use ReadAt interface
* internal/era: elevate anonymous func to named
* cmd/utils: don't store entire era file in-memory during import / export
* internal/era: better abstraction between era and e2store
* cmd/era: properly close era files
* cmd/era: don't let defers stack
* cmd/geth: add description for import-history
* cmd/utils: better bytes buffer
* internal/era: error if accumulator has more records than max allowed
* internal/era: better doc comment
* internal/era/e2store: rm superfluous reader, rm superfluous testcases, add fuzzer
* internal/era: avoid some repetition
* internal/era: simplify clauses
* internal/era: unexport things
* internal/era,cmd/utils,cmd/era: change to iterator interface for reading era entries
* cmd/utils: better defer handling in history test
* internal/era,cmd: add number method to era iterator to get the current block number
* internal/era/e2store: avoid double allocation during write
* internal/era,cmd/utils: fix lint issues
* internal/era: add ReaderAt func so entry value can be read lazily
Co-authored-by: lightclient <lightclient@protonmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* internal/era: improve iterator interface
* internal/era: fix rlp decode of header and correctly read total difficulty
* cmd/era: fix rebase errors
* cmd/era: clearer comments
* cmd,internal: fix comment typos
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
When managing geth, it is sometimes desirable to do a partial wipe; deleting state but retaining freezer data. A partial wipe can be somewhat tricky to accomplish.
This change implements the ability to perform partial wipe by making it possible to run geth removedb non-interactive, using command line options instead.
Original problem was caused by #28595, where we made it so that as soon as we start to sync, the root of the disk layer is deleted. That is not wrong per se, but another part of the code uses the "presence of the root" as an init-check for the pathdb. And, since the init-check now failed, the code tried to re-initialize it which failed since a sync was already ongoing.
The total impact being: after a state-sync has begun, if the node for some reason is is shut down, it will refuse to start up again, with the error message: `Fatal: Failed to register the Ethereum service: waiting for sync.`.
This change also modifies how `geth removedb` works, so that the user is prompted for two things: `state data` and `ancient chain`. The former includes both the chaindb aswell as any state history stored in ancients.
---------
Co-authored-by: Martin HS <martin@swende.se>
This change
- Removes interface `log.Format`,
- Removes method `log.FormatFunc`,
- unexports `TerminalHandler.TerminalFormat` formatting methods (renamed to `TerminalHandler.format`)
- removes the notion of `log.Lazy` values
The lazy handler was useful in the old log package, since it
could defer the evaluation of costly attributes until later in the
log pipeline: thus, if the logging was done at 'Trace', we could
skip evaluation if logging only was set to 'Info'.
With the move to slog, this way of deferring evaluation is no longer
needed, since slog introduced 'Enabled': the caller can thus do
the evaluate-or-not decision at the callsite, which is much more
straight-forward than dealing with lazy reflect-based evaluation.
Also, lazy evaluation would not work with 'native' slog, as in, these
two statements would be evaluated differently:
```golang
log.Info("foo", "my lazy", lazyObj)
slog.Info("foo", "my lazy", lazyObj)
```
This PR replaces Geth's logger package (a fork of [log15](https://github.com/inconshreveable/log15)) with an implementation using slog, a logging library included as part of the Go standard library as of Go1.21.
Main changes are as follows:
* removes any log handlers that were unused in the Geth codebase.
* Json, logfmt, and terminal formatters are now slog handlers.
* Verbosity level constants are changed to match slog constant values. Internal translation is done to make this opaque to the user and backwards compatible with existing `--verbosity` and `--vmodule` options.
* `--log.backtraceat` and `--log.debug` are removed.
The external-facing API is largely the same as the existing Geth logger. Logger method signatures remain unchanged.
A small semantic difference is that a `Handler` can only be set once per `Logger` and not changed dynamically. This just means that a new logger must be instantiated every time the handler of the root logger is changed.
----
For users of the `go-ethereum/log` module. If you were using this module for your own project, you will need to change the initialization. If you previously did
```golang
log.Root().SetHandler(log.LvlFilterHandler(log.LvlInfo, log.StreamHandler(os.Stderr, log.TerminalFormat(true))))
```
You now instead need to do
```golang
log.SetDefault(log.NewLogger(log.NewTerminalHandlerWithLevel(os.Stderr, log.LevelInfo, true)))
```
See more about reasoning here: https://github.com/ethereum/go-ethereum/issues/28558#issuecomment-1820606613
There were several problems related to dumping state.
- If a preimage was missing, even if we had set the `OnlyWithAddresses` to `false`, to export them anyway, the way the mapping was constructed (using `common.Address` as key) made the entries get lost anyway. Concerns both state- and blockchain tests.
- Blockchain test execution was not configured to store preimages.
This changes makes it so that the block test executor takes a callback, just like the state test executor already does. This callback can be used to examine the post-execution state, e.g. to aid debugging of test failures.
* cmd, les, tests: remove light client code
This commit removes the light client (LES) code.
Since the merge the light client has been broken and
it is hard to maintain it alongside the normal client.
We decided it would be best to remove it for now and
maybe rework and reintroduce it in the future.
* cmd, eth: remove some more mentions of light mode
* cmd: re-add flags and mark as deprecated
* cmd: warn the user about deprecated flags
* eth: better error message
Adds a subcommand: `geth snapshot export-preimages`, to export preimages of every hash found during a snapshot enumeration: that is, it exports _only the active state_, and not _all_ preimages that have been used but are no longer part of the state.
This tool is needed for the verkle transition, in order to distribute the preimages needed for the conversion. Since only the 'active' preimages are exported, the output is shrunk from ~70GB to ~4GB.
The order of the output is the order used by the snapshot enumeration, which avoids database thrashing. However, it also means that storage-slot preimages are not deduplicated.
This change allows the creation of a genesis block for verkle testnets. This makes for a chunk of code that is easier to review and still touches many discussion points.
* cmd/geth: more testcases for logging
This adds more edgecases around logging, particularly around handling of different types of nil-values
as concrete types and within interfaces.
Also adds tests with 'reserved' values which breaks json/logfmt formats. The json output is checked in,
but not actively used by any testcase at the moment.
* cmd/geth/testdata: remove timestamps
a little copying is better than a little dependency
-- go proverb
We have this dependency on docker, a.k.a moby: a gigantic library, and we only need ~70 LOC,
so here I tried moving it inline instead.
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR is a bit in preparation for the slog work in #28187 .
Our current test re logging mostly test the internals, but we have no real end-to-end test of the logging output. This PR introduces a simple reexec-based log tester. This also relies upon a special mode in geth, which can be made to eject a set of predefined log messages (only available if the build-tag `integrationtests` is used
e.g. go run --tags=integrationtests ./cmd/geth --log.format terminal logtest
While working on this, I also noticed a quirk in the setup: when geth was configured to use a file output, then two separate handlers were used (one handler for the file, one handler for the console). Using two separate handlers means that two formatters are used, thus the formatting of any/all records happened twice. This PR changes the mechanism to use two separate io.Writers instead, which is both more optimal and fixes a bug which occurs due to a global statefulness in the formatter.
* cmd, core: resolve scheme from a read-write database
* cmd, core, eth: move the scheme check in the ethereum constructor
* cmd/geth: dump should in ro mode
* cmd: reverts
This updates minisign to the latest version. One new thing is that minisign (not go-minisign) has started to prehash the file, and in order to make geth pass the version-check, we need to sign the file in legacy-mode.
This chang creates a GaugeInfo metrics type for registering informational (textual) metrics, e.g. geth version number. It also improves the testing for backend-exporters, and uses a shared subpackage in 'internal' to provide sample datasets and ordered registry.
Implements #21783
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core/blobpool: implement txpool for blob txs
* core/txpool: track address reservations to notice any weird bugs
* core/txpool/blobpool: add support for in-memory operation for tests
* core/txpool/blobpool: fix heap updating after SetGasTip if account is evicted
* core/txpool/blobpool: fix eviction order if cheap leading txs are included
* core/txpool/blobpool: add note as to why the eviction fields are not inited in reinject
* go.mod: pull in inmem billy form upstream
* core/txpool/blobpool: fix review commens
* core/txpool/blobpool: make heap and heap test deterministic
* core/txpool/blobpool: luv u linter
* core/txpool: limit blob transactions to 16 per account
* core/txpool/blobpool: fix rebase errors
* core/txpool/blobpool: luv you linter
* go.mod: revert some strange crypto package dep updates
This change removes PoW header syncing related code from LES and also deletes
duplicated packages les/catalyst, les/downloader and les/fetcher. These package copies
were created because people wanted to make changes in their eth/ counterparts, but weren't
able to adapt LES code to the API changes.
It is usually best to set GOMAXPROCS to the number of available CPU cores. However, setting
it like that does not work well when the process is quota-limited to a certain number of CPUs.
The automaxprocs library configures GOMAXPROCS, taking such limits into account.
This simplifies the code that initializes the discovery a bit, and
adds new flags for enabling/disabling discv4 and discv5 separately.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This change adds back the 'geth --dev' mode of operation, using a cl-mocker.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com>
