Fixes an issue I accidentally introduced in #32579. Essentially, because
we gate the engine methods based on particular forks and I did not add
the BPOs as allowed forks to the method.
Add state size tracking and retrieve api, start geth with `--state.size-tracking`,
the initial bootstrap is required (around 1h on mainnet), after the bootstrap,
use `debug_stateSize()` RPC to retrieve the state size:
```
> debug.stateSize()
{
accountBytes: "0x39681967b",
accountTrienodeBytes: "0xc57939f0c",
accountTrienodes: "0x198b36ac",
accounts: "0x129da14a",
blockNumber: "0x1635e90",
contractCodeBytes: "0x2b63ef481",
contractCodes: "0x1c7b45",
stateRoot: "0x9c36a3ec3745d72eea8700bd27b90dcaa66de0494b187c5600750044151e620a",
storageBytes: "0x18a6e7d3f1",
storageTrienodeBytes: "0x2e7f53fae6",
storageTrienodes: "0x6e49a234",
storages: "0x517859c5"
}
```
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Another getBlobs PR on top of
https://github.com/ethereum/go-ethereum/pull/32190 to avoid some minor
regressions.
- bring back more log messages from before
- continue processing also on some internal errors
- ensure v2 complies with spec even if there are internal errors
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
This pull request fixes a regression, introduced in #32190
Specifically, in GetBlobsV1 engine API, if any blob is missing, the null
should be placed in
response, unfortunately a behavioral change was introduced in #32190,
returning an error
instead.
What's more, a more comprehensive test suite is added to cover both
`GetBlobsV1` and
`GetBlobsV2` endpoints.
When maxPeers was just above some perfect square, and a few peers
dropped for some reason, we changed the peer selection function.
When new peers were acquired, we changed again.
This PR improves the selection function, in two ways. First, it will always select
sqrt(peers) to broadcast to. Second, the selection now uses siphash with a secret
key, to guard against information leaks about tx source.
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
Fixes a prestateTracer test case covering 7702 delegation.
---------
Co-authored-by: Jared Wasinger <j-wasinger@hotmail.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Replace hardcoded 5-second sleep with polling loop that actively checks
snap sync state. This approach is already used in other project tests
(like account_cache_test.go) and provides better reliability by:
- Reducing flaky behavior on slower systems
- Finishing early when sync completes quickly
- Using 1-second timeout with 100ms polling intervals
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
The TestTraceChain function was missing a defer backend.teardown() call,
which is required to properly release blockchain resources after test
completion.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
**Problem:** Including full account code in prestateTracer response
significantly increases response payload size.
**Solution:** Add codeHash field to the response. This will allow
client-side bytecode caching and is a non-breaking change.
**Note:** codeHash for EoAs is excluded to save space.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
The GetHeader function was incorrectly returning an error when
encountering nil peers in the peers list, which contradicted the comment
"keep retrying if none are yet available".
Changed the logic to skip nil peers with 'continue' instead of returning
an error, allowing the function to properly iterate through all
available peers and attempt to retrieve the target header from each valid peer.
This ensures the function behaves as intended - trying all available
peers before giving up, rather than failing on the first nil peer encountered.
The previous comment stated that every 3rd block has a tx and every 5th
has an uncle.
The implementation actually adds one transaction to every second block
and does not add uncles.
Updated the comment to reflect the real behavior to avoid confusion when
reading tests.
This PR makes 2 changes to how
[EIP-7825](https://github.com/ethereum/go-ethereum/pull/31824) behaves.
When `eth_estimateGas` or `eth_createAccessList` is called without any
gas limit in the payload, geth will choose the block's gas limit or the
`RPCGasCap`, which can be larger than the `maxTxGas`.
When this happens for `estimateGas`, the gas estimation just errors out
and ends, when it should continue doing binary search to find the lowest
possible gas limit.
This PR will:
- Add a check to see if `hi` is larger than `maxTxGas` and cap it to
`maxTxGas` if it's larger. And add a special case handling for gas
estimation execute when it errs with `ErrGasLimitTooHigh`
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
- If all the `vhashes` are in the same `sidecar`, then it will load the
same blob tx many times. This PR aims to upgrade this.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This introduces an error when the filter has both `blockHash` and
`fromBlock`/`toBlock`, since these are mutually exclusive. Seems the
tests were actually returning `not found` error, which went undetected
since there was no check on the actual returned error in the test.
Correct the error message in the ExecuteStatelessPayloadV4 function to
reference newPayloadV4 and the Prague fork, instead of incorrectly
referencing newPayloadV3 and Cancun.
This improves clarity during debugging and aligns the error message with
the actual function and fork being validated. No logic is changed.
---------
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
The main purpose of this change is to enforce the version setting when
constructing the blobSidecar, avoiding creating sidecar with wrong/default
version tag.
Fixes#32175.
This fixes the scenario where the blockhash opcode would return 0x0
during RPC simulations when using BlockOverrides with a future block
number. The root cause was that BlockOverrides.Apply() only modified the
vm.BlockContext, but GetHashFn() depends on the actual
types.Header.Number to resolve valid historical block hashes. This
caused a mismatch and resulted in incorrect behavior during trace and
call simulations.
---------
Co-authored-by: shantichanal <158101918+shantichanal@users.noreply.github.com>
Co-authored-by: lightclient <lightclient@protonmail.com>
This is something interesting I came across during my benchmarks, we
spent ~3.8% of all allocations allocating the header number on the heap.
```
(pprof) list GetHeaderByHash
Total: 38197204475
ROUTINE ======================== github.com/ethereum/go-ethereum/core.(*BlockChain).GetHeaderByHash in github.com/ethereum/go-ethereum/core/blockchain_reader.go
0 5786566117 (flat, cum) 15.15% of Total
. . 79:func (bc *BlockChain) GetHeaderByHash(hash common.Hash) *types.Header {
. 5786566117 80: return bc.hc.GetHeaderByHash(hash)
. . 81:}
. . 82:
. . 83:// GetHeaderByNumber retrieves a block header from the database by number,
. . 84:// caching it (associated with its hash) if found.
. . 85:func (bc *BlockChain) GetHeaderByNumber(number uint64) *types.Header {
ROUTINE ======================== github.com/ethereum/go-ethereum/core.(*HeaderChain).GetHeaderByHash in github.com/ethereum/go-ethereum/core/headerchain.go
0 5786566117 (flat, cum) 15.15% of Total
. . 404:func (hc *HeaderChain) GetHeaderByHash(hash common.Hash) *types.Header {
. 1471264309 405: number := hc.GetBlockNumber(hash)
. . 406: if number == nil {
. . 407: return nil
. . 408: }
. 4315301808 409: return hc.GetHeader(hash, *number)
. . 410:}
. . 411:
. . 412:// HasHeader checks if a block header is present in the database or not.
. . 413:// In theory, if header is present in the database, all relative components
. . 414:// like td and hash->number should be present too.
(pprof) list GetBlockNumber
Total: 38197204475
ROUTINE ======================== github.com/ethereum/go-ethereum/core.(*HeaderChain).GetBlockNumber in github.com/ethereum/go-ethereum/core/headerchain.go
94438817 1471264309 (flat, cum) 3.85% of Total
. . 100:func (hc *HeaderChain) GetBlockNumber(hash common.Hash) *uint64 {
94438817 94438817 101: if cached, ok := hc.numberCache.Get(hash); ok {
. . 102: return &cached
. . 103: }
. 1376270828 104: number := rawdb.ReadHeaderNumber(hc.chainDb, hash)
. . 105: if number != nil {
. 554664 106: hc.numberCache.Add(hash, *number)
. . 107: }
. . 108: return number
. . 109:}
. . 110:
. . 111:type headerWriteResult struct {
(pprof) list ReadHeaderNumber
Total: 38197204475
ROUTINE ======================== github.com/ethereum/go-ethereum/core/rawdb.ReadHeaderNumber in github.com/ethereum/go-ethereum/core/rawdb/accessors_chain.go
204606513 1376270828 (flat, cum) 3.60% of Total
. . 146:func ReadHeaderNumber(db ethdb.KeyValueReader, hash common.Hash) *uint64 {
109577863 1281242178 147: data, _ := db.Get(headerNumberKey(hash))
. . 148: if len(data) != 8 {
. . 149: return nil
. . 150: }
95028650 95028650 151: number := binary.BigEndian.Uint64(data)
. . 152: return &number
. . 153:}
. . 154:
. . 155:// WriteHeaderNumber stores the hash->number mapping.
. . 156:func WriteHeaderNumber(db ethdb.KeyValueWriter, hash common.Hash, number uint64) {
```
Opening this to discuss the idea, I know that rawdb.EmptyNumber is not a
great name for the variable, open to suggestions
Introduce file-based state journal in path database, fixing
the Pebble restriction when the journal size exceeds 4GB.
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR fixes an issue in the tx_fetcher DoS prevention logic where the
code keeps the overflow amount (`want - maxTxAnnounces`) instead of the
allowed amount (`maxTxAnnounces - used`). The specific changes are:
- Correct slice indexing in the announcement drop logic
- Extend the overflow test case to cover the inversion scenario
This pull request fixes an issue in disabling direct-ancient mode in
snap sync.
Specifically, if `origin >= frozen && origin != 0`, it implies a part of
chain data has been written into the key-value store, all the following
writes into ancient store scheduled by downloader will be rejected
with error
`ERROR[07-10|03:46:57.924] Error importing chain data to ancients
err="can't add block 1166 hash: the append operation is out-order: have
1166 want 0"`.
This issue is detected by the https://github.com/ethpandaops/kurtosis-sync-test,
which initiates the first snap sync cycle without the finalized header and
implicitly disables the direct-ancient mode. A few seconds later the second
snap sync cycle is initiated with the finalized information and direct-ancient mode
is enabled incorrectly.
alternate approach to https://github.com/ethereum/go-ethereum/pull/31328
suggested by @MariusVanDerWijden . This prevents Geth from outputting a
lot of logs when trying to commit on-demand dev mode blocks while the
client is shutting down.
The issue is hard to reproduce, but I've seen it myself and it is
annoying when it happens. I think this is a reasonable simple solution,
and we can revisit if we find that the output is still too large (i.e.
there is a large delay between initiating shut down and the simulated
beacon receiving the signal, while in this loop).
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Improves the SSTORE gas calculation a bit. Previously we would pull up
the state object twice. This is okay for existing objects, since they
are cached, however non-existing objects are not cached, thus we needed
to go through all 128 diff layers as well as the disk layer twice, just
for the gas calculation
```
goos: linux
goarch: amd64
pkg: github.com/ethereum/go-ethereum/core/vm
cpu: AMD Ryzen 9 5900X 12-Core Processor
│ /tmp/old.txt │ /tmp/new.txt │
│ sec/op │ sec/op vs base │
Interpreter-24 1118.0n ± 2% 602.8n ± 1% -46.09% (p=0.000 n=10)
```
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Small update for logs when syncing with blsync. Downgrades the "latest
filled block is not available" to warn.
Co-authored-by: shantichanal <158101918+shantichanal@users.noreply.github.com>
geth cmd: `geth --dev --dev.period 5`
call: `debug.setHead` to rollback several blocks.
If the `debug.setHead` call is delayed, it will trigger a panic with a
small probability, due to using the null point of
`fcResponse.PayloadID`.
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This pull request refines the filtermap implementation, defining key
APIs for map and
epoch calculations to improve readability.
This pull request doesn't change any logic, it's a pure cleanup.
---------
Co-authored-by: zsfelfoldi <zsfelfoldi@gmail.com>
The address filter was never checked against a maximum limit, which can
be somewhat abusive for API nodes. This PR adds a limit similar to
topics
## Description (AI generated)
This pull request introduces a new validation to enforce a maximum limit
on the number of addresses allowed in filter criteria for Ethereum logs.
It includes updates to the `FilterAPI` and `EventSystem` logic, as well
as corresponding test cases to ensure the new constraint is properly
enforced.
### Core functionality changes:
* **Validation for maximum addresses in filter criteria**:
- Added a new constant, `maxAddresses`, set to 100, to define the
maximum allowable addresses in a filter.
- Introduced a new error, `errExceedMaxAddresses`, to handle cases where
the number of addresses exceeds the limit.
- Updated the `GetLogs` method in `FilterAPI` to validate the number of
addresses against `maxAddresses`.
- Modified the `UnmarshalJSON` method to return an error if the number
of addresses in the input JSON exceeds `maxAddresses`.
- Added similar validation to the `SubscribeLogs` method in
`EventSystem`.
### Test updates:
* **New test cases for address limit validation**:
- Added a test in `TestUnmarshalJSONNewFilterArgs` to verify that
exceeding the maximum number of addresses triggers the
`errExceedMaxAddresses` error.
- Updated `TestInvalidLogFilterCreation` to include a test case for an
invalid filter with more than `maxAddresses` addresses.
- Updated `TestInvalidGetLogsRequest` to test for invalid log requests
with excessive addresses.
These changes ensure that the system enforces a reasonable limit on the
number of addresses in filter criteria, improving robustness and
preventing potential performance issues.
---------
Co-authored-by: zsfelfoldi <zsfelfoldi@gmail.com>
core.BlockChainConfig.VmConfig is not a pointer, so setting the Tracer
on the `vmConfig` object after it was passed to options does *not* apply
it to options.VmConfig
This fixes the issue by setting the value directly inside the `options`
object and removing the confusing `vmConfig` variable to prevent further
mistakes.
This pull request tracks the state indexing progress in eth_syncing
RPC response, i.e. we will return non-null syncing status until indexing
has finished.
This pull request fixes a flaw in PBSS archive mode that significantly
degrades performance when the mode is enabled.
Originally, in hash mode, the dirty trie cache is completely disabled
when archive mode is active, in order to disable the in-memory garbage
collection mechanism. However, the internal logic in path mode differs
significantly, and the dirty trie node cache is essential for maintaining
chain insertion performance. Therefore, the cache is now retained in
path mode.
If Geth is engaged in a long-run block synchronization, such as a full
syncing over a large number of blocks, invoking `debug_setHead` will
cause `downloader.Cancel` to wait for all fetchers to stop first.
This can be time-consuming, particularly for the block processing
thread.
To address this, we manually call `blockchain.StopInsert` to interrupt
the blocking processing thread and allow it to exit immediately, and
after that call `blockchain.ResumeInsert` to resume the block
downloading process.
Additionally, we add a sanity check for the input block number of
`debug_setHead` to ensure its validity.
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
In this pull request, the original `CacheConfig` has been renamed to `BlockChainConfig`.
Over time, more fields have been added to `CacheConfig` to support
blockchain configuration. Such as `ChainHistoryMode`, which clearly extends
beyond just caching concerns.
Additionally, adding new parameters to the blockchain constructor has
become increasingly complicated, since it’s initialized across multiple
places in the codebase. A natural solution is to consolidate these arguments
into a dedicated configuration struct.
As a result, the existing `CacheConfig` has been redefined as `BlockChainConfig`.
Some parameters, such as `VmConfig`, `TxLookupLimit`, and `ChainOverrides`
have been moved into `BlockChainConfig`. Besides, a few fields in `BlockChainConfig`
were renamed, specifically:
- `TrieCleanNoPrefetch` -> `NoPrefetch`
- `TrieDirtyDisabled` -> `ArchiveMode`
Notably, this change won't affect the command line flags or the toml
configuration file. It's just an internal refactoring and fully backward-compatible.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
The prestateTracer had the intention of excluding accounts that were
empty prior to execution from the prestate. This was being done only for
created contracts. This PR makes it so all such empty accounts are
excluded. This behavior is configurable using the `includeEmpty: true`
flag introduced in #31855.
---------
Signed-off-by: Ignacio Hagopian <jsign.uy@gmail.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR introduces a flag that enables returning of newly created state
objects in the prestateTracer.
**Rationale**
Having this information is useful because local execution can more
easily distinguish between newly created objects and system contracts.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This pull request introduces a new test suite in workload framework, for
transaction tracing.
**test generation**
`go run . tracegen --trace-tests trace-test.json http://host:8545`
and you can choose to store the trace result in a specific folder
`go run . tracegen --trace-tests trace-test.json --trace-output
./trace-result http://host:8545`
**test run**
`./workload test -run Trace/Transaction --trace-invalid ./trace-invalid
http://host:8545`
The mismatched trace result will be saved in the specific folder for
further investigation.
This PR improves the speed of Disc/v4 and Disc/v5 based discovery by
adding a prefetch buffer to discovery sources, eliminating slowdowns
due to timeouts and rate mismatch between the two processes.
Since we now want to filter the discv4 nodes iterator, it is being removed
from the default discovery mix in p2p.Server. To keep backwards-compatibility,
the default unfiltered discovery iterator will be utilized by the server when
no protocol-specific discovery is configured.
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This fixes a regression introduced by #29158 where receipts of empty blocks
were stored into the database as an empty byte array, instead of an RLP empty list.
Fixes#31938
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Fixes an issue where querying logs for block ranges starting from 0 would fail with an irrelevant
error on a pruned node. Now the correct "history is pruned" error will be returned.
This situation was failing quietly for me recently when I had a partial
data corruption issue. Changing the log level to Error would increase
visibility for me.
This implements a backing store for chain history based on era1 files.
The new store is integrated with the freezer. Queries for blocks and receipts
below the current freezer tail are handled by the era store.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: lightclient <lightclient@protonmail.com>
This changes the API backend to return null for not-found blocks. This behavior
is required by the RPC When `BlockByNumberOrHash` always returned an error
for this case ever since being added in https://github.com/ethereum/go-ethereum/pull/19491.
The backend method has a couple of call sites, and all of them handle a `nil`
block result because `BlockByNumber` returns `nil` for not-found.
The only case where this makes a real difference is for `eth_getBlockReceipts`,
which was changed in #31361 to actually forward the error from `BlockByNumberOrHash`
to the caller.
This PR introduces a new native tracer for AA bundlers. Bundlers participating in the alternative
mempool will need to validate userops. This tracer will return sufficient information for them to
decide whether griefing is possible. Resolves#30546
---------
Co-authored-by: Sina M <1591639+s1na@users.noreply.github.com>
This PR implements eth/69. This protocol version drops the bloom filter
from receipts messages, reducing the amount of data needed for a sync
by ~530GB (2.3B txs * 256 byte) uncompressed. Compressed this will
be reduced to ~100GB
The new version also changes the Status message and introduces the
BlockRangeUpdate message to relay information about the available history
range.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
In this pull request, snapshot generation in pathdb has been ported from
the legacy state snapshot implementation. Additionally, when running in
path mode, legacy state snapshot data is now managed by the pathdb
based snapshot logic.
Note: Existing snapshot data will be re-generated, regardless of whether
it was previously fully constructed.
This PR contains three refactors:
- refactor the latest fork check that we use quite extensively
- refactor the nil checks in NewPayloads
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
This PR introduces an allocation-free version of the
Transaction.EffectiveGasTip method to improve performance by reducing
memory allocations.
## Changes
- Added a new `EffectiveGasTipInto` method that accepts a destination
parameter to avoid memory allocations
- Refactored the existing `EffectiveGasTip` method to use the new
allocation-free implementation
- Updated related methods (`EffectiveGasTipValue`, `EffectiveGasTipCmp`,
`EffectiveGasTipIntCmp`) to use the allocation-free approach
- Added tests and benchmarks to verify correctness and measure
performance improvements
## Motivation
In high-transaction-volume environments, the `EffectiveGasTip` method is
called frequently. Reducing memory allocations in this method decreases
garbage collection pressure and improves overall system performance.
## Benchmark Results
As-Is
BenchmarkEffectiveGasTip/Original-10 42089140 27.45 ns/op 8 B/op 1
allocs/op
To-Be
BenchmarkEffectiveGasTip/IntoMethod-10 72353263 16.73 ns/op 0 B/op 0
allocs/op
## Summary of Improvements
- **Performance**: ~39% faster execution (27.45 ns/op → 16.73 ns/op)
- **Memory**: Eliminated all allocations (8 B/op → 0 B/op)
- **Allocation count**: Reduced from 1 to 0 allocations per operation
This optimization follows the same pattern successfully applied to other
methods in the codebase, maintaining API compatibility while improving
performance.
## Safety & Compatibility
This optimization has no side effects or adverse impacts because:
- It maintains functional equivalence as confirmed by comprehensive
tests
- It preserves API compatibility with existing callers
- It follows clear memory ownership patterns with the destination
parameter
- It maintains thread safety by only modifying the caller-provided
destination parameter
This optimization follows the same pattern successfully applied to other
methods in the codebase, providing better performance without
compromising stability or correctness.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Fixes methods debug_standardTraceBlockToFile
and debug_standardTraceBadBlockToFile which were
outputting empty files.
---------
Co-authored-by: maskpp <maskpp266@gmail.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Fixes https://github.com/ethereum/go-ethereum/issues/31732.
This logic was removed in the recent refactoring in the txindexer to
handle history cutoff (#31393). It was first introduced in this PR:
https://github.com/ethereum/go-ethereum/pull/28908.
I have tested it and it works as an alternative to #31745.
This PR packs 3 changes to the flow of fetching txs from the API:
- It caches the indexer tail after each run is over to avoid hitting the
db all the time as was done originally in #28908.
- Changes `backend.GetTransaction`. It doesn't return an error anymore
when tx indexer is in progress. It shifts the responsibility to the
caller to check the progress. The reason is that in most cases we anyway
check the txpool for the tx. If it was indeed a pending tx we can avoid
the indexer progress check.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This changes the filtermaps to only pull up the raw receipts, not the
derived receipts which saves a lot of allocations.
During normal execution this will reduce the allocations of the whole
geth node by ~15%.
This PR changes the chain view update mechanism of the log filter.
Previously the head updates were all wired through the indexer, even in
unindexed mode. This was both a bit weird and also unsafe as the
indexer's chain view was updates asynchronously with some delay, making
some log related tests flaky. Also, the reorg safety of the indexed
search was integrated with unindexed search in a weird way, relying on
`syncRange.ValidBlocks` in the unindexed case too, with a special
condition added to only consider the head of the valid range but not the
tail in the unindexed case.
In this PR the current chain view is directly accessible through the
filter backend and unindexed search is also chain view based, making it
inherently safe. The matcher sync mechanism is now only used for indexed
search as originally intended, removing a few ugly special conditions.
The PR is currently based on top of
https://github.com/ethereum/go-ethereum/pull/31642
Together they fix https://github.com/ethereum/go-ethereum/issues/31518
and replace https://github.com/ethereum/go-ethereum/pull/31542
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
The API `eth_feeHistory` returns
`{"jsonrpc":"2.0","id":1,"error":{"code":-32603,"message":"json:
unsupported value: NaN"}}`, when we query `eth_feeHistory` with a old
block that without a blob, or when the field
`config.blobSchedule.cancun.max` in genesis.config is 0 (that happens
for some projects fork geth but they don't have blob).
So here we specially handle the case when maxBlobGas == 0 to prevent
this issue from happening.
This pull request improves error handling for local transaction submissions.
Specifically, if a transaction fails with a temporary error but might be
accepted later, the error will not be returned to the user; instead, the
transaction will be tracked locally for resubmission.
However, if the transaction fails with a permanent error (e.g., invalid
transaction or insufficient balance), the error will be propagated to the user.
These errors returned in the legacyPool are regarded as temporary failure:
- `ErrOutOfOrderTxFromDelegated`
- `txpool.ErrInflightTxLimitReached`
- `ErrAuthorityReserved`
- `txpool.ErrUnderpriced`
- `ErrTxPoolOverflow`
- `ErrFutureReplacePending`
Notably, InsufficientBalance is also treated as a permanent error, as
it’s highly unlikely that users will transfer funds into the sender account
after submitting the transaction. Otherwise, users may be confused—seeing
their transaction submitted but unaware that the sender lacks sufficient funds—and
continue waiting for it to be included.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
closes#31401
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
BroadcastTransactions needs the Sender address to route message flows
from the same Sender address consistently to the same random subset of
peers. It however spent considerable time calculating the Sender
addresses, even if the Sender address was already calculated and cached
in other parts of the code.
Since we only need the mapping, we can use any signer, and the one that
had already been used is a better choice because of cache reuse.
I added the history mode configuration in eth/ethconfig initially, since
it seemed like the logical place. But it turns out we need access to the
intended pruning setting at a deeper level, and it actually needs to be
integrated with the blockchain startup procedure.
With this change applied, if a node previously had its history pruned,
and is subsequently restarted **without** the `--history.chain
postmerge` flag, the `BlockChain` initialization code will now verify
the freezer tail against the known pruning point of the predefined
network and will restore pruning status. Note that this logic is quite
restrictive, we allow non-zero tail only for known networks, and only
for the specific pruning point that is defined.
As of now, Geth disconnects peers only on protocol error or timeout,
meaning once connection slots are filled, the peerset is largely fixed.
As mentioned in https://github.com/ethereum/go-ethereum/issues/31321,
Geth should occasionally disconnect peers to ensure some churn.
What/when to disconnect could depend on:
- the state of geth (e.g. sync or not)
- current number of peers
- peer level metrics
This PR adds a very slow churn using a random drop.
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
before this changes, this will result in numerous test failures:
```
> go test -run=Eth2AssembleBlock -c
> stress ./catalyst.test
```
The reason is that after creating/inserting the test chain, there is a
race between the txpool head reset and the promotion of txs added from
tests.
Ensuring that the txpool state is up to date with the head of the chain
before proceeding fixes these flaky tests.
Fixes#31169
The TestTransactionForgotten test was flaky due to real time
dependencies. This PR:
- Replaces real time with mock clock for deterministic timing control
- Adds precise state checks at timeout boundaries
- Verifies underpriced cache states and cleanup
- Improves test reliability by controlling transaction timestamps
- Adds checks for transaction re-enqueueing behavior
The changes ensure consistent test behavior without timing-related
flakiness.
---------
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
