This PR fixes a bug in the current blobpool `Reset` function where it
used the Transaction type instead of blobTxForPool.
Decoding transactions fetched from the pool as Transaction type
caused an error because the blobpool stores blobTxForPool types.
## Summary
The `--rpc.telemetry.sample-ratio` flag declares `Value: 1.0` and `geth
--help` advertises `(default: 1)`. In practice, however, omitting the
flag produces a sample ratio of `0`, causing
`sdktrace.TraceIDRatioBased(0)` to drop 100% of spans. Users who enable
`--rpc.telemetry` see the `OpenTelemetry trace export enabled` log line
and a clean startup, but no traces ever leave the process.
The root cause is the interaction between two pieces of code:
1. `cmd/utils/flags.go:setOpenTelemetry` (added in #34062) only copies
the flag value when `ctx.IsSet(...)` returns true:
```go
if ctx.IsSet(RPCTelemetrySampleRatioFlag.Name) {
tcfg.SampleRatio = ctx.Float64(RPCTelemetrySampleRatioFlag.Name)
}
```
That is the right pattern for "don't clobber a config-file value with
the CLI default," but it implies that something else must initialise the
field when neither source sets it.
2. `node/defaults.go:DefaultConfig` never initialises
`OpenTelemetry.SampleRatio`, leaving it at the float64 zero value.
The result for the common CLI-only user (no TOML config) is `SampleRatio
= 0` → every span is silently dropped, despite the documented default of
1.
## Change
Seed `OpenTelemetry: OpenTelemetryConfig{SampleRatio: 1.0}` in
`node.DefaultConfig` so the documented default matches runtime behavior
and the `ctx.IsSet` guard in `setOpenTelemetry` continues to do what it
was designed to do.
This PR extends the journal to track the pre-transaction values of
mutated balances, nonces, and code.
At the end of the transaction, these values are used to filter out no-op
changes, such as balance transitions from a-> b->a. These changes are
excluded from the block-level access list.
Additionally, there is a dedicated `bal.ConstructionBlockAccessList`
objects for gathering the state reads and writes within the current
transaction. These state writes will be keyed by the block accessList
index.
---------
Co-authored-by: jwasinger <j-wasinger@hotmail.com>
This PR introduces OnGasChangeV2 tracing hook, as the pre-requisite for landing
EIP-8037.
---------
Co-authored-by: Sina M <1591639+s1na@users.noreply.github.com>
Passing `--v2=false` currently still selects the v2 binding generator
because the command checks whether the flag was set.
This switches generation to use the boolean flag value, so explicit
false continues to generate legacy bindings while `--v2` keeps selecting
v2.
This PR introduces a separate transaction pool type for sparse blobpool.
In sparse blobpool, PooledTransactions message delivers transactions without
blobs, partial or full cells are downloaded by Cells message. Blobpool no longer
stores transactions with complete sidecars, and it stores transactions without
blobs, along with the corresponding cells. Because of this, a dedicated type
distinct from types.Transaction is required.
This PR introduces a type called `BlobTxForPool` and stores each sidecar field
independently, in order to bypass the assumption that a sidecar always exists as
a complete unit.
Reintroducing the conversion queue was considered, but was ultimately omitted
because type conversion should be sufficiently fast. With sparse blobpool, blob
-> cell computation would take about ~13ms per blob. Not sure whether this is
fast enough, but otherwise we can add the conversion queue later on the sparse
blobpool branch.
In b2843a11d, metrics check len(res) == len(hashes) but res is
pre-allocated with make(), so length is always equal. Partial hit metric
never fires. Count non-nil elements instead.
---------
Co-authored-by: Bosul Mun <bsbs8645@snu.ac.kr>
This is a refactoring PR to wrap all pre/post-execution system calls as
the exported functions, eliminating the duplicated system calls across
the codebase.
There are a few things unchanged but worths highlight:
- ChainMaker is left as unchanged, a significant rewrite is required
- BeaconRoot in header should be non-nil if Cancun is enabled
---------
Co-authored-by: jwasinger <j-wasinger@hotmail.com>
In the --create path, execFunc returns gasLeft as the second return
value, but the rest of the code treats this value as "gas used" (printed
as such, and compared in timedExec). This makes gas reporting incorrect
and can cause benchmark consistency checks to fail.
Every tracer that implements Stop/GetResult held a `reason error` field
that is written by Stop (called from the trace-timeout watchdog
goroutine in api.go) and read by GetResult (called by the RPC handler
main goroutine). These accesses were unsynchronized.
Passing `--dev=false` currently still enters the dev-mode startup path
because a couple of branches check whether the flag was set, not its
boolean value.
This switches those branches to use `ctx.Bool`, so explicit false does
not start dev mode or emit a dev genesis, while `--dev` keeps its
existing behavior.
Removes the appveyor.yml since we moved to github runners.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
I was tracing a signature verification issue in a nocgo build and found
that `VerifySignature` doesn't validate hash length. #33104 added the
check to `Sign` and `sigToPub` but missed this one. The cgo path in
`secp256k1/secp256.go` already rejects non-32-byte hashes, so the nocgo
path should do the same — otherwise a wrong-length hash gets passed to
decred's `Verify` and silently gives a bogus result.
Passing `--graphql=false` currently still registers the GraphQL handler
because the startup path checks whether the flag was set, not its
boolean value.
This switches the registration condition to use `ctx.Bool`, so explicit
false disables GraphQL while the default behavior remains unchanged.
`GetBlobs` returned early when `CellProofsAt` reported
corrupted/out-of-bounds proofs, dropping every blob already collected
and aborting the remaining hashes — a single bad sidecar killed the
whole Engine API batch for consensus clients. Replaced the `return nil,
nil, nil, err` with `log.Error + continue` so the slot stays `nil` per
the sparse-array contract, matching the store/RLP/nil-sidecar branches a
few lines above.
Fixes#34881
This fixes a hang in `Table.waitForNodes`. It is a replacement for PRs
#34890, #33665 which tried to fix the same issue in a different way.
- #34890 doesn't really fix the issue, just makes it less likely
- #33665 tries to fix it by moving the feed send outside of the lock
I created this PR because I want to keep the synchronous node feed
sending in `Table.nodeAdded`.
---------
Co-authored-by: Csaba Kiraly <csaba.kiraly@gmail.com>
This fixes an issue where packets send to the `Unhandled` channel
configured on discv4 could be corrupted when the packet buffer gets
reused.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR makes a small update to the `Pending()` method in the legacy
pool. By changing the lock from exclusive to read-only, it aims to
improve concurrency performance.
---------
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
This is an alternative PR for
https://github.com/ethereum/go-ethereum/pull/34746.
This PR implements the second approach among the two possible solutions
mentioned in the above PR.
Requests for unavailable items are possible when the peer is following a
different fork from us. However this is not expected to happen
frequently. Considering the amount of complexity added to the codebase,
the simpler approach (this PR) can be preferred.
This PR adds `AdoptSyncedState()` alongside `Enable()`. It does the same
pathdb bookkeeping (now factored into a shared `resetForReactivation()`
helper), but skips the regeneration. The wiring/calling code lands in
#34626
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
When `io.Copy` succeeds but the buffered `Close` fails (e.g. disk full
on `Flush`), the error was swallowed and verification reported a
misleading hash mismatch instead of the real I/O failure. Keep the
`Close` error when `io.Copy` didn't already produce one.
---------
Co-authored-by: Jared Wasinger <j-wasinger@hotmail.com>
## Summary
Fixes#31917.
`geth era-download` now only prints `is stale` when an existing
downloaded file fails checksum verification. Missing files are still
downloaded normally, but no longer get mislabeled as stale.
## Why
`DownloadFile` used `verifyHash` for both missing files and checksum
mismatches, then printed `is stale` for any error. This made first-time
downloads look like corrupt or outdated files.
## Validation
- `make all`
- `go run ./build/ci.go test`
- `go run ./build/ci.go lint`
- `go run ./build/ci.go check_generate`
- `go run ./build/ci.go check_baddeps`
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
The refactor from `for el := plist.Front(); ...; el = el.Next()` to the
new `iterList` iterator in #34743 silently dropped two things needed by
resetTimeout:
1. `nextTimeout = el.Value.(*replyMatcher)` at the top of the loop. This
assignment is what gives `nextTimeout` its documented meaning ("head of
plist when timeout was last reset"), and what makes the early-return
optimization at the top of resetTimeout work. Without it, nextTimeout is
only ever written to nil, so `nextTimeout == plist.Front().Value` is
always false and the optimization is dead.
2. `nextTimeout.errc <- errClockWarp` in the clock-warp branch now reads
a stale or nil pointer. Prior to the refactor, the inner assignment kept
nextTimeout pointing at the current matcher so its errc was the right
channel to receive the errClockWarp signal. After the refactor, on first
entry into the clock-warp branch nextTimeout is nil, which panics the
UDPv4 loop goroutine with a nil pointer deref and takes discv4 down.
Re-assign `nextTimeout = p` at the head of the loop (restoring the
documented invariant) and send the clock-warp error on `p.errc` rather
than the now-stale `nextTimeout.errc`.
The clock-warp branch triggers only when the system clock jumps backward
after a deadline is assigned (deadline - time.Now() >= 2*respTimeout,
i.e. at least ~500ms backward jump), which is why this regression
slipped past CI - it is not exercised by any existing unit test, and
writing one would require plumbing a clock through the loop.
The reconstruct callback indexes parallel response slices (bodies,
receipts). Passing the accept counter used the wrong element when an
earlier header in the same batch hit a stale slot.
the gapped queue cap was effectively per-sender rather than total — a
sender pool spread across enough distinct addresses could grow
`p.gapped` well past `maxGapped`, defeating the resource bound.
`maxGapped` was being compared against `len(p.gapped)`, which is a
`map[address][]tx` and counts unique senders, not queued txs. Switched
the check to `len(p.gappedSource)` (keyed by tx hash, so its length is
the real total). Also wired up a `blobpool/gapped/count` gauge plus
`promoted`, `evicted`, and `gappedfull` meters so queue size and churn
are actually observable in prod.
Disables the recently added log indexer from a simulated backend.
In most cases the log indexer is not required and unindexed search
should be fast enough.
Fixes https://github.com/ethereum/go-ethereum/issues/32552.
This updates the typed `ethclient` model for `eth_simulateV1` call
results to include `maxUsedGas`, matching the field already returned by
the server-side RPC response.
Follow-up to #32789.
The mux tracer fanned out every standard hook to its children but never
forwarded OnSystemCall{Start,End}. Tracers that rely on these - like
`logger.jsonLogger`, which uses the start hook to silence its opcode
hook for the duration of a system call - never got the signal when
wrapped behind a mux.
In evm t8n, combining `--trace` with `--opcode-count` (default for geth
with exec specs) produces exactly that wrapping. The first system call
(e.g. `ProcessBeaconBlockRoot`) then fires `OnOpcode` on the json logger
before any `OnTxStart` has run, dereferencing a nil env and crashing
t8n.
Forward both hooks through the mux. The V2 fan-out falls back to V1 for
children that only implement the legacy hook, mirroring the precedence
already used in `core/state_processor.go`.
This PR addresses one of the biggest performance issue with binary
tries: storing each internal node individually bloats the index, the
disk, and triggers a lot of write amplifications. To fix this issue,
this PR serializes groups of nodes together.
Because we are still looking for the ideal group size, the "depth" of
the group tree is made a parameter, but that will be removed in the
future, once the perfect size is known.
This is a rebase of #33658
---------
Co-authored-by: Copilot <copilot@github.com>
Next() function in RawIterator returned true on decompression errors.Now it
returns false on those cases. Redundant error check on cmd/era/main.go is also
removed.
---------
Co-authored-by: Bosul Mun <bsbs8645@snu.ac.kr>
The layer-5 diff condition used `i > 50 || i < 85`, which is true for
almost all keys in the 0..255 loop. Use `i > 50 && i < 85` so layer 5
only covers the intended band (51..84), consistent with the snapshot
iterator test fix.
- Fixes an error shadowing issue in the deliver() function, where a
stale result from GetDeliverySlot caused the original failure to be
overwritten by errStaleDelivery.
- Adds errInvalidBody and errInvalidReceipt to the downloader error
checks to properly drop peers who sent invalid responses.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
EIP-7825 caps the transaction gas limit at `MaxTxGas`, but after
Amsterdam/EIP-8037 the transaction gas limit can include state gas
reservoir in addition to the regular gas dimension. Applying the Osaka
cap to the full `tx.Gas()` rejects otherwise valid Amsterdam
transactions that need more than `MaxTxGas` total gas because of state
gas, while their regular gas use remains within the intended limit.
This changes geth to stop applying the full transaction gas cap once
Amsterdam is active:
- txpool stateless validation no longer rejects `tx.Gas() > MaxTxGas`
under Amsterdam
- legacy pool reorg cleanup does not purge high-total-gas transactions
at the Osaka transition if Amsterdam is also active
- execution precheck mirrors the txpool behavior and does not reject
high-total-gas messages under Amsterdam
The block gas limit check remains in place, so transactions still cannot
request more total gas than the current block gas limit.
Validation run:
```
go test ./core/txpool ./core/txpool/legacypool
go test ./core -run TestStateProcessorErrors
```
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Here, we change the EVM stack implementation to use an 'arena', i.e.
a shared allocation pool for sub-call stacks. The stack is now more
GC-friendly, since it is a slice of uint256 values instead of a slice of pointers.
Code that pushes an item to the stack has been changed to get() the top
item, then overwrite it.
The PR is a rewrite/rebase of #30362.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Save `el.Next()` before calling `plist.Remove(el)` so iteration
continues correctly. Previously the loop exited after removing the first
expired matcher because `Remove` invalidates the element's links.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
`StateSetWithOrigin.decode()` was missing size computation after
deserializing origin data, causing `size` to remain zero after journal
reload. Added the same calculation logic used in
`NewStateSetWithOrigin()`.
This PR updates the BAL structure definition to the latest the spec,
- Balance has been changed from [16]byte to uint256
- Storage key and value has been changed from [32]byte to uint256
- BlockAccessList has been changed from a struct to a slice of
AccountChanges
- TxIndex has been changed from uint16 to uint32
The stateReadList field introduced by #34776 to track the state access
footprint for EIP-7928 was not propagated by StateDB.Copy. Every other
per-transaction field that lives alongside it (accessList,
transientStorage, journal, witness, accessEvents) is copied explicitly,
so this field was simply missed.
After Copy the copy's stateReadList is nil while the original keeps its
entries, so the nil-safe guards on StateAccessList.AddAccount / AddState
silently drop every access recorded on the copy. For any post-Amsterdam
code path that copies a prepared state and keeps reading from the copy,
the BAL footprint becomes incomplete.
Add a Copy method on bal.StateAccessList and invoke it from
StateDB.Copy, matching the pattern used for accessList and accessEvents.
---------
Co-authored-by: jwasinger <j-wasinger@hotmail.com>
The testPeer request counters (nAccountRequests, nStorageRequests,
nBytecodeRequests, nTrienodeRequests) were plain int fields incremented
with ++. These increments happen in Request* methods that are invoked
concurrently by the Syncer from multiple goroutines
(assignBytecodeTasks, assignStorageTasks, etc.), causing a data race
reliably detected by go test -race.
Change the counters to atomic.Int64 so increments and reads are
synchronized without introducing a mutex.
Fixes races detected in TestMultiSyncManyUseless,
TestMultiSyncManyUselessWithLowTimeout,
TestMultiSyncManyUnresponsive, TestSyncWithStorageAndOneCappedPeer,
TestSyncWithStorageAndCorruptPeer, and
TestSyncWithStorageAndNonProvingPeer.
scheduleFetches.func1 is the biggest allocator in the long-duration
profile of node (11% of total alloc_space).
Each peer-iteration pre-allocated make([]common.Hash, 0, maxTxRetrievals),
even for peers that end up collecting no new hashes (all their announces
were already being fetched by someone else).
Defer the slice allocation to the first append. Peers that collect zero hashes
now pay zero allocation, which is the common case on the timeoutTrigger
path where all peers with any announces are iterated.
When `rpc.Client.Close()` is called, the TCP connection is torn down
without sending a WebSocket Close frame. The server sees `websocket:
close 1006 (abnormal closure): unexpected EOF` instead of a clean 1000
(normal closure).
### Root cause
`websocketCodec.close()` delegates to `jsonCodec.close()` which calls
`c.conn.Close()` — gorilla/websocket's `Conn.Close` explicitly "[closes
the underlying network connection without sending or waiting for a close
message](https://pkg.go.dev/github.com/gorilla/websocket#Conn.Close)"
(per RFC 6455).
### Fix
Send a WebSocket Close control frame (opcode 0x8, status 1000) before
closing the underlying connection. Uses `WriteControl` with the same
`encMu` mutex pattern already used by `pingLoop` for write
serialization, and reuses the existing `wsPingWriteTimeout` (5s)
constant.
`WriteControl` errors are safe to ignore — the connection may already be
broken by the time we attempt the close frame.
Fixes#30482
This PR adds three cell-level kzg functions required for the sparse
blobpool (eth/72).
- VerifyCells: Verifies cells corresponding to proofs. This is used to
verify cells received from eth/72 peers.
- ComputeCells: Computes cells from blobs. This is needed because user
submissions and eth/71 transaction deliveries contain blobs, while
eth/72 peers expect cells.
- RecoverBlobs: Recovers blobs from partial cells. This is needed to
support both eth/71 and eth/72
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
scheduleFetches.func1 is the single biggest allocator in the Pyroscope
profile of a busy node (~13.5 GB/hr, 8% of total alloc_space). Each
peer-iteration pre-allocated 'make([]common.Hash, 0, maxTxRetrievals)'
= 8 KB, even for peers that end up collecting no new hashes (all their
announces were already being fetched by someone else).
Defer the slice allocation to the first append. Peers that collect zero
hashes now pay zero allocation, which is the common case on the
timeoutTrigger path where all peers with any announces are iterated.
New benchmarks BenchmarkScheduleFetches_{100peers_10new,
100peers_allFetching, 500peers_3new} (benchstat, 6 samples):
scenario ns/op B/op allocs/op
100p/10new unchanged unchanged unchanged (fast path)
100p/allFetching -62% -92% -20%
500p/3new -22% -44% -7%
geomean -33% -65% -9%
The rlpx ping command mishandled disconnect responses on two counts:
the error return from rlp.DecodeBytes was ignored, so decode failures
silently produced an "invalid disconnect message" error with no context;
and the decoder assumed the spec-compliant list form exclusively, while
older geth and some other implementations send the reason as a bare
byte.
Accept both wire forms (matching the legacy-tolerant behavior already
in p2p.decodeDisconnectMessage), and on decode failure include the raw
payload so operators can see exactly what the peer sent. Add a unit
test for the decoder covering both forms plus the empty-payload error
path.
This PR reverts the last change to the freebsd build, and it fixes the
_direct_ FreeBSD build.
Here, we change the upstream of github.com/karalabe/hid to its new home,
github.com/ethereum/hid. The new dependency includes a dummy.go file
that makes `go mod vendor` work.
##### Origin of the problem
Enrique is maintaining the FreeBSD ports, and FreeBSD ports only support
vendored go modules. It turns out that `go mod vendor` will not include
C files if there is no `.go` file in the directory. Since the C files
were missing for `karalabe/hid`, the ports maintainer tried to use the
version of `hidapi` that is provided by the ports. To do so, he had to
modify the way things are included. This broke the _out of ports_
FreeBSD build.
Difference to Appveyor:
- Missing 386 build. Hit some issue because user-space memory there is
around 2Gbs. Also seems generally extremely niche.
- Not doing the archive step and NSIS installer and uploads (those are
done on the builder).
This PR removes `FinalizeAndAssemble` from the consensus engine
interface
and relocates block assembly logic outside of the consensus engine.
Block assembly is consensus-agnostic. Most validations can be performed
by the caller. For example:
- Withdrawals must be nil prior to Shanghai
- After Shanghai upgrade, withdrawals must be non-nil, even if empty.
The only notable consensus-specific validation is related to uncles. In
clique,
the concept of uncles does not exist, and any block containing uncles
should
be considered invalid.
Within the block production package, the policy is to produce blocks
according
to the latest chain specification. As a result, Clique-specific block
production
is no longer supported. This tradeoff is considered acceptable.
The nodes were named using the byte representation of the path, instead
of the binary representation. This was confusing to other client devs
trying to achieve interop.
## Summary
- Add `grpc://` and `grpcs://` URL scheme support for OTLP trace export
alongside existing `http://`/`https://`
- The OTLP spec defines two transports: HTTP (port 4318) and gRPC (port
4317). Many observability backends (Jaeger, Tempo, Datadog) prefer gRPC
for lower overhead
- Both `otlptracehttp` and `otlptracegrpc` return `*otlptrace.Exporter`,
so only exporter construction changes — everything downstream (batch
processor, tracer provider, lifecycle) is untouched
- Update flag usage strings to be transport-agnostic
## Example usage
```
geth --rpc.telemetry --rpc.telemetry.endpoint grpc://localhost:4317
geth --rpc.telemetry --rpc.telemetry.endpoint grpcs://tempo-grpc.example.com:443
```
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
clarify that `ReadLastPivotNumber` returns `nil` only when snap sync has
never been attempted, since the marker is written during snap sync and
never cleared.
In the recent refactoring, the state commit logic has been abstracted,
making it more flexible to design state databases for various use cases.
For example, execution-only modes where state mutation is disabled.
As part of this change, the database interface was extended with a
Commit function. However, it currently accepts an unexported struct
`stateUpdate`, which prevents downstream projects from customizing
the state commit behavior.
To address this limitation, the stateUpdate type is now exported.
This PR separates the trie reader to mptTrieReader and ubtTrieReader for
improved readability and extensibility.
---------
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
## Summary
Replace the `BinaryNode` interface with `NodeRef uint32` indices into
typed arena pools, eliminating GC-scanned pointers from binary trie
nodes.
Inspired by [fjl's
observation](https://github.com/ethereum/go-ethereum/pull/34034#issuecomment-4075176446):
> *"if the binary trie produces such a large graph, it should probably
be changed so that the trie node type does not contain pointers. The
runtime does not scan objects that do not contain pointers, so it can
really help with the performance to build it this way."*
### The problem
CPU profiling of the binary trie (EIP-7864) showed **44% of CPU time in
garbage collection**. Each `InternalNode` held two `BinaryNode`
interface values (2 pointer-words each), and the GC scanned every one.
With ~25K `InternalNode`s in memory during block processing, this
created enormous GC pressure.
### The solution
`NodeRef` is a compact `uint32` (2-bit kind tag + 30-bit pool index).
`NodeStore` manages chunked typed pools per node kind:
- **InternalNode pool**: ZERO Go pointers (children are `NodeRef`, hash
is `[32]byte`) → noscan spans
- **HashedNode pool**: ZERO Go pointers → noscan spans
- **StemNode pool**: retains `Values [][]byte` (matching existing
format)
The serialization format is unchanged — flat InternalNode
`[type][leftHash][rightHash]` = 65 bytes.
## Benchmark: Apple M4 Pro (`--benchtime=10s --count=3`, on top of
#34021)
| Metric | Baseline | Arena | Delta |
|--------|----------|-------|-------|
| Approve (Mgas/s) | 374 | 382 | **+2.1%** |
| BalanceOf (Mgas/s) | 885 | 901 | **+1.8%** |
| Approve allocs/op | 775K | **607K** | **-21.7%** |
| BalanceOf allocs/op | 265K | **228K** | **-14.0%** |
## Benchmark: AMD EPYC 48-core (50GB state, execution-specs ERC-20, on
top of #34021 + #34032)
| Benchmark | Baseline | Arena | Delta |
|-----------|----------|-------|-------|
| erc20_approve (write) | 22.4 Mgas/s | **27.0 Mgas/s** | **+20.5%** |
| mixed_sload_sstore | 62.9 Mgas/s | **97.3 Mgas/s** | **+54.7%** |
| erc20_balanceof (read) | 180.8 Mgas/s | 167.6 Mgas/s | -7.3% (cold
cache variance) |
The arena benefit scales with heap size — the EPYC (larger heap, more GC
pressure) shows much larger gains than the M4 Pro (efficient unified
memory). The mixed workload baseline was unstable (62.9 vs 16.3 Mgas/s
between runs due to GC-induced throughput collapse); the arena
eliminates this entirely (95-97 Mgas/s, stable).
## Dependencies
Benchmarked with #34021 (H01 N+1 fix) + #34032 (R14 parallel hashing).
No code dependency — applies independently to master.
All test suites pass (`trie/bintrie` with `-race`, `core/state`,
`triedb/pathdb`, `cmd/geth`).
---------
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
This PR introduces a gasBudget struct to track the available gas for EVM
execution.
With the upcoming EIP-8037, multi-dimensional gas accounting will be
introduced, requiring multiple gas budget counters to be tracked
simultaneously. To support this, the counters are grouped into a gasBudget
structure.
This change is a prerequisite for internal refactoring in preparation
for EIP-8037.
---------
Co-authored-by: MariusVanDerWijden <m.vanderwijden@live.de>
In openFreezerFileForAppend, if Seek fails after the file is
successfully opened, the file handle is not closed, leaking a
descriptor.
Similarly in newTable, if opening the meta file fails, the
already-opened index file is not closed. And if newMetadata fails, both
the index and meta files are leaked.
Under repeated error conditions (e.g., corrupted filesystem), these
leaks accumulate and may exhaust the OS file descriptor limit, causing
cascading failures.
## Problem
`mustCopyTrie` in `core/state/database.go` panics on any trie type not
in its type switch:
```go
func mustCopyTrie(t Trie) Trie {
switch t := t.(type) {
case *trie.StateTrie:
return t.Copy()
case *transitiontrie.TransitionTrie:
return t.Copy()
default:
panic(fmt.Errorf("unknown trie type %T", t))
}
}
```
On UBT-backed databases (`state.NewUBTDatabase(...)`, used by
`blockchain.go:2124` when the triedb is configured for binary trie),
`StateDB.trie` is `*bintrie.BinaryTrie` — so every `StateDB.Copy()` call
(hit from `statedb.go:699` and the `*trie.StateTrie` branch of
`state_object.go:546`) crashes with `unknown trie type
*bintrie.BinaryTrie`.
## Fix
Add the `*bintrie.BinaryTrie` case. `BinaryTrie.Copy()` already exists
at `trie/bintrie/trie.go:372` and produces a correct deep copy — this
just wires it into the switch.
## Problem
`BinaryTrie.Commit` unconditionally walked every resolved in-memory node
and flushed it into the `NodeSet`, producing one Pebble write per
resolved internal + stem node on every block — even when the node's
on-disk blob was bitwise identical to the previous commit. On a warm
400M-state workload this meant tens of thousands of redundant 65-byte
writes per block, compounding Pebble compaction pressure on every
commit.
The existing `mustRecompute` flag tracks *hash* staleness, not
*disk-blob* staleness: after `Hash()` completes, `mustRecompute` is
cleared even though the fresh blob has not been persisted. It is
therefore insufficient for a skip-flush optimization.
## Fix
Mirror the MPT committer pattern (`trie/committer.go:51-56`) by adding a
`dirty` flag on `InternalNode` and `StemNode` with the semantics *the
on-disk blob is stale*. The flag is:
- set to `true` wherever the node is created or structurally modified
(the same call sites that already set `mustRecompute = true`);
- set to `false` only after the node has been passed to the `flushfn`
inside `CollectNodes`;
- left `false` on nodes produced by `DeserializeNodeWithHash`, matching
the *loaded from disk, already persisted* semantics.
`CollectNodes` short-circuits on `!dirty` subtrees. The propagation
invariant (an ancestor of any dirty node is itself dirty) is already
maintained by the existing `InsertValuesAtStem` / `Insert` paths, which
now mirror every `mustRecompute = true` setter with a `dirty = true`
setter.
## Benchmark
New `BenchmarkCollectNodes_SparseWrite` measures commit cost when only
one leaf changes between blocks — the common case for state updates.
10,000-stem trie, one-leaf modification + Commit per iteration, Apple M4
Pro:
| | before | after | delta |
|---|---|---|---|
| time / op | 12,653,000 ns | 7,336 ns | **~1,725×** |
| bytes / op | 107,224,740 B | 37,774 B | **~2,839×** |
| allocs / op | 80,953 | 134 | **~604×** |
End-to-end impact on a real workload depends on the
resolved-footprint-to-dirty-path ratio; the new
`TestBinaryTrieCommitIncremental` provides a structural regression guard
(asserts that a Commit following a single-leaf modification flushes a
root-to-leaf path, not the whole tree).
---
Found all of this stuff while bloating my #34706 DB to make some
benchmarks. And saw we were spending A LOT OF TIME on hashing.
Hope this helps the perf a bit. Will rebase the flat-state PR on top of
this once merged.
`timedExec` compares errors by direct interface inequality (haveErr !=
err). If execFunc returns newly constructed errors with the same message
each run, this will panic even though behavior is equivalent.
Adds a 'code' exporter to 'geth db export' that iterates over all
contract bytecode entries (CodePrefix + code_hash -> bytecode).
Usage: geth --datadir <dir> db export code code.rlp
This enables exporting contract bytecode.
This Pr implements some prerequisite changes for #34004 : split the
`CachingDB` into a `MerkleDB` and a `UBTDB`, so that very different
behaviors don't clash as much.
The transition isn't handled by this PR, but after talking to Gary we
agreed that `UBTDB` should receive another `triedb`, which will only be
loaded if the `Ended` flag is set to false in the conversion contract.
If this is too hard to achieve, it makes sense to load it regardless,
and then loading can be prevented at a later stage by adding a
`UBTTransitionFinalizationTime` in `ChainConfig`.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
`trace.noreturndata` is documented as "enable return data output" but
the flag name/value imply it disables return data. This is confusing for
users and likely inverted wording. Update the Usage string to reflect
the actual behavior (disable return data output).
Changes the log handler to check for vmodule level overrides
even for messages above the current level. This enables the user to selectively
hide messages from certain packages, among other things.
Also fixes a bug where handler instances created by WithAttr would not follow
the level setting anymore. The WithAttrs method is calledd by slog.Logger.With,
which we also use in go-ethereum to create context specific loggers with
pre-filled attributes. Under the previous implementation of WithAttrs, if the
application created a long-lived logger (for example, for a specific peer), then
that logger would not be affected by later level changes done on the top-level
logger, leading to potentially missed events.
Closes: #30717
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Felix Lange <fjl@twurst.com>
Auto-enable logic for `StatelessSelfValidation` was reading CLI flag
directly via `ctx.Bool()`, bypassing the merged `cfg.EnableWitnessStats`
value. Now uses `cfg.EnableWitnessStats` so config file settings trigger
the same auto-enable behavior as CLI flags.
StateDB.Commit first commits all storage changes into the storage trie,
then updates the account metadata with the new storage root into the
account trie.
Within StateDB.Commit, the new storage trie root has already been
computed and applied as the storage root. This PR explicitly skips the
redundant storage trie root assignment for readability.
This is a copy of #34721 but against `master` (rather than
`bal-devnet-3`), as requested by @jwasinger, since the slotnum logic now
exists on `master` as well.
This PR simplifies the implementation of EIP-7610 by eliminating the
need to check storage emptiness during contract deployment.
EIP-7610 specifies that contract creation must be rejected if the
destination account has a non-zero nonce, non-empty runtime code, or
**non-empty storage**.
After EIP-161, all newly deployed contracts are initialized with a nonce
of one. As a result, such accounts are no longer eligible as deployment
targets unless they are explicitly cleared.
However, prior to EIP-161, contracts were initialized with a nonce of
zero. This made it possible to end up with accounts that have:
- zero nonce
- empty runtime code
- non-empty storage (created during constructor execution)
- non-zero balance
These edge-case accounts complicate the storage emptiness check.
In practice, contract addresses are derived using one of the following
formulas:
- `Keccak256(rlp({sender, nonce}))[12:]`
- `Keccak256([]byte{0xff}, sender, salt[:], initHash)[12:]`
As such, an existing address is not selected as a deployment target
unless a collision occurs, which is extremely unlikely.
---
Previously, verifying storage emptiness relied on GetStorageRoot.
However, with the transition to the block-based access list (BAL),
the storage root is no longer available, as computing it would require
reconstructing the full storage trie from all mutations of preceding
transactions.
To address this, this PR introduces a simplified approach: it hardcodes
the set of known accounts that have zero nonce, empty runtime code,
but non-empty storage and non-zero balance. During contract deployment,
if the destination address belongs to this set, the deployment is
rejected.
This check is applied retroactively back to genesis. Since no address
collision events have occurred in Ethereum’s history, this change does
not
alter existing behavior. Instead, it serves as a safeguard for future
state
transitions.
This fixes the remaining Hive discv5/FindnodeResults failures in the
cmd/devp2p/internal/v5test fixture.
The issue was in the simulator-side bystander behavior, not in
production discovery logic. The existing fixture could get bystanders
inserted into the remote table, but under current geth behavior they
were not stable enough to remain valid FINDNODE results. In
particular, the fixture still had a few protocol/behavior mismatches:
- incomplete WHOAREYOU recovery
- replies not consistently following the UDP envelope source
- incorrect endpoint echoing in PONG
- fixture-originated PING using the wrong ENR sequence
- bystanders answering background FINDNODE with empty NODES
That last point was important because current lookup accounting can
treat repeatedly unhelpful FINDNODE interactions as failures. As a
result, a bystander could become live via PING/PONG and still later be
dropped from the table before the final FindnodeResults assertion.
This change updates the fixture so that bystanders behave more like
stable discv5 peers:
- perform one explicit initial handshake, then switch to passive response handling
- resend the exact challenged packet when handling WHOAREYOU
- reply to the actual UDP packet source and mirror that source in PONG.ToIP / PONG.ToPort
- use the bystander’s own ENR sequence in fixture-originated PING
- prefill each bystander with the bystander ENR set and answer FINDNODE from that set
The result is that the fixture now forms a small self-consistent lookup
environment instead of a set of peers that are live but systematically
poor lookup participants.
Fixes#34108
The UDPv5 test harness (`newUDPV5Test`) uses the default `PingInterval`
of 3 seconds. When tests like `TestUDPv5_findnodeHandling` insert nodes
into the routing table via `fillTable`, the table's revalidation loop
may schedule PING packets for those nodes. Under the race detector or on
slow CI runners, the test runs long enough for revalidation to fire,
causing background pings to be written to the test pipe. The `close()`
method then finds these as unmatched packets and fails.
The fix sets `PingInterval` to a very large value in the test harness so
revalidation never fires during tests.
Verified locally: 100 iterations with `-race -count=100` pass reliably,
where previously the test would fail within ~50 iterations.
runtime.setDefaults was unconditionally assigning cfg.Random =
&common.Hash{}, which silently overwrote any caller-provided Random
value. This made it impossible to simulate a specific PREVRANDAO and
also forced post-merge rules whenever London was active, regardless of
the intended environment.
This change only initializes cfg.Random when it is nil, matching how
other fields in Config are defaulted. Existing callers that did not set
Random keep the same behavior (a non-nil zero hash still enables
post-merge semantics), while callers that explicitly set Random now get
their value respected.
This fixes a truncation bug that results in an invalid serialization of
empty EIP712.
For example:
```json
{
"method": "eth_signTypedData_v4",
"request": {
"types": {
"EIP712Domain": [
{
"name": "version",
"type": "string"
}
],
"Empty": []
},
"primaryType": "Empty",
"domain": {
"version": "0"
},
"message": {}
}
}
```
When calculating the type-hash for the stuct-hash, it will incorrectly
use `Empty)` instead of `Empty()`
# Summary
Replaces the inline `errors.New("event signature mismatch")` in
generated `UnpackXxxEvent` methods with per-event package-level sentinel
errors (e.g. `ErrTransferSignatureMismatch`,
`ErrApprovalSignatureMismatch`), allowing callers to reliably
distinguish a topic mismatch from a genuine decoding failure via
`errors.Is`.
Each event gets its own sentinel, generated via the abigen template:
```go
var ErrTransferSignatureMismatch = errors.New("event signature mismatch")
```
This scoping is intentional — it allows callers to be precise about
*which* event was mismatched, which is useful when routing logs across
multiple unpackers.
# Motivation
Previously, all errors returned from `UnpackXxxEvent` were
indistinguishable without string matching. This is especially
problematic when processing logs sourced from `eth_getBlockReceipts`,
where a caller receives the full set of logs for a block across all
contracts and event types. In that context, a signature mismatch is
expected and should be skipped, while any other error (malformed data,
topic parsing failure) indicates something is genuinely wrong and should
halt execution:
```go
for _, log := range blockLogs {
event, err := contract.UnpackTransferEvent(log)
if errors.Is(err, gen.ErrTransferSignatureMismatch) {
continue // not our event, expected
}
if err != nil {
return fmt.Errorf("unexpected decode failure: %w", err) // alert
}
// process event
}
```
**Changes:**
- `abigen` template: generates a `ErrXxxSignatureMismatch` sentinel per
event and returns it on topic mismatch instead of an inline error
- Existing generated bindings & testdata: regenerated to reflect the
update
Implements #34075
Return ErrInvalidOpCode with the executing opcode and offending
immediate for forbidden DUPN, SWAPN, and EXCHANGE operands. Extend
TestEIP8024_Execution to assert both opcode and operand for all
invalid-immediate paths.
TestUpdatedKeyfileContents was intermittently failing with:
- Emptying account file failed
- wasn't notified of new accounts
Root cause: waitForAccounts required the account list match and an
immediately readable ks.changes notification in the same instant,
creating a timing race between cache update visibility and channel
delivery.
This change keeps the same timeout window but waits until both
conditions are observed, which preserves test intent while removing the
flaky timing dependency.
Validation:
- go test ./accounts/keystore -run '^TestUpdatedKeyfileContents$'
-count=100
The comment formula showed (i+3) but the code multiplies by 9 (Lsh 3 +
add = 8+1).
This was a error when porting from upstream golang.org/x/crypto/bn256
where ξ=i+3.
Go-ethereum changed the constant to ξ=i+9 but forgot to update the inner
formula.
Two fixes for `testing_buildBlockV1`:
1. Add `omitempty` to `SlotNumber` in `ExecutableData` so it is omitted
for pre-Amsterdam payloads. The spec defines the response as
`ExecutionPayloadV3` which does not include `slotNumber`.
2. Pass `res.fees` instead of `new(big.Int)` in `BuildTestingPayload` so
`blockValue` reflects actual priority fees instead of always being zero.
Corresponding fixture update: ethereum/execution-apis#783
Fix `GetAccount` returning **wrong account data** for non-existent
addresses when the trie root is a `StemNode` (single-account trie) — the
`StemNode` branch returned `r.Values` without verifying the queried
address's stem matches.
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
`BinaryTrie.DeleteAccount` was a no-op, silently ignoring the caller's
deletion request and leaving the old `BasicData` and `CodeHash` in the
trie.
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
This tool is designed for the offline translation of an MPT database to
a binary trie. This is to be used for users who e.g. want to prove
equivalence of a binary tree chain shadowing the MPT chain.
It adds a `bintrie` command, cleanly separating the concerns.
This PR fixes https://github.com/ethereum/go-ethereum/issues/34623 by
changing the `vm.StateDB` interface:
Instead of `EmitLogsForBurnAccounts()` emitting burn logs, `LogsForBurnAccounts()
[]*types.Log` just returns these logs which are then emitted by the caller.
This way when tracing is used, `hookedStateDB.AddLog` will be used
automatically and there is no need to duplicate either the burn log
logic or the `OnLog` tracing hook.
ProcessBeaconBlockRoot (EIP-4788) and processRequestsSystemCall
(EIP-7002/7251) do not merge the EVM access events into the state after
execution. ProcessParentBlockHash (EIP-2935) already does this correctly
at line 290-291.
Without this merge, the Verkle witness will be missing the storage
accesses from the beacon root and request system calls, leading to
incomplete witnesses and potential consensus issues when Verkle
activates.
PathDB keys diff layers by state root, not by block hash. That means a
side-chain block can legitimately collide with an existing canonical diff layer
when both blocks produce the same post-state (for example same parent,
same coinbase, no txs).
Today `layerTree.add` blindly inserts that second layer. If the root
already exists, this overwrites `tree.layers[root]` and appends the same
root to the mutation lookup again. Later account/storage lookups resolve
that root to the wrong diff layer, which can corrupt reads for descendant
canonical states.
At runtime, the corruption is silent: no error is logged and no invariant check
fires. State reads against affected descendants simply return stale data
from the wrong diff layer (for example, an account balance that reflects one
fewer block reward), which can propagate into RPC responses and block
validation.
This change makes duplicate-root inserts idempotent. A second layer with
the same state root does not add any new retrievable state to a tree that is
already keyed by root; keeping the original layer preserves the existing parent
chain and avoids polluting the lookup history with duplicate roots.
The regression test imports a canonical chain of two layers followed by
a fork layer at height 1 with the same state root but a different block hash.
Before the fix, account and storage lookups at the head resolve the fork
layer instead of the canonical one. After the fix, the duplicate insert is
skipped and lookups remain correct.
This PR refactors the encoding rules for `AccessListsPacket` in the wire
protocol. Specifically:
- The response is now encoded as a list of `rlp.RawValue`
- `rlp.EmptyString` is used as a placeholder for unavailable BAL objects
This PR adds `GenerateTrie(db, scheme, root)` to the `triedb` package,
which rebuilds all tries from flat snapshot KV data. This is needed by
snap/2 sync so it can rebuild the trie after downloading the flat state.
The shared trie generation pipeline from `pathdb/verifier.go` was moved
into `triedb/internal/conversion.go` so both `GenerateTrie` and
`VerifyState` reuse the same code.
👋
This PR makes it possible to run "Amsterdam" in statetests. I'm aware
that they'll be failing and not in consensus with other clients, yet,
but it's nice to be able to run tests and see what works and what
doesn't
Before the change:
```
$ go run ./cmd/evm statetest ./amsterdam.json
[
{
"name": "00000019-mixed-1",
"pass": false,
"fork": "Amsterdam",
"error": "unexpected error: unsupported fork \"Amsterdam\""
}
]
```
After
```
$ go run ./cmd/evm statetest ./amsterdam.json
{"stateRoot": "0x25b78260b76493a783c77c513125c8b0c5d24e058b4e87130bbe06f1d8b9419e"}
[
{
"name": "00000019-mixed-1",
"pass": false,
"stateRoot": "0x25b78260b76493a783c77c513125c8b0c5d24e058b4e87130bbe06f1d8b9419e",
"fork": "Amsterdam",
"error": "post state root mismatch: got 25b78260b76493a783c77c513125c8b0c5d24e058b4e87130bbe06f1d8b9419e, want 0000000000000000000000000000000000000000000000000000000000000000"
}
]
```
In this PR, the Database interface in `core/state` has been extended
with one more function:
```go
// Iteratee returns a state iteratee associated with the specified state root,
// through which the account iterator and storage iterator can be created.
Iteratee(root common.Hash) (Iteratee, error)
```
With this additional abstraction layer, the implementation details can be hidden
behind the interface. For example, state traversal can now operate directly on
the flat state for Verkle or binary trees, which do not natively support traversal.
Moreover, state dumping will now prefer using the flat state iterator as
the primary option, offering better efficiency.
Edit: this PR also fixes a tiny issue in the state dump, marshalling the
next field in the correct way.
This PR implements the missing functionality for archive nodes by
pruning stale index data.
The current mechanism is relatively simple but sufficient for now:
it periodically iterates over index entries and deletes outdated data
on a per-block basis.
The pruning process is triggered every 90,000 new blocks (approximately
every 12 days), and the iteration typically takes ~30 minutes on a
mainnet node.
This mechanism is only applied with `gcmode=archive` enabled, having
no impact on normal full node.
This PR changes the blsync checkpoint init logic so that even if the
initialization fails with a certain server and an error log message is
printed, the server goes back to its initial state and is allowed to
retry initialization after the failure delay period. The previous logic
had an `ssDone` server state that did put the server in a permanently
unusable state once the checkpoint init failed for an apparently
permanent reason. This was not the correct behavior because different
servers behave differently in case of overload and sometimes the
response to a permanently missing item is not clearly distinguishable
from an overload response. A safer logic is to never assume anything to
be permanent and always give a chance to retry.
The failure delay formula is also fixed; now it is properly capped at
`maxFailureDelay`. The previous formula did allow the delay to grow
unlimited if a retry was attempted immediately after each delay period.
This is a breaking change in the opcode (structLog) tracer. Several fields
will have a slight formatting difference to conform to the newly established
spec at: https://github.com/ethereum/execution-apis/pull/762. The differences
include:
- `memory`: words will have the 0x prefix. Also last word of memory will be padded to 32-bytes.
- `storage`: keys and values will have the 0x prefix.
---------
Co-authored-by: Sina M <1591639+s1na@users.noreply.github.com>
Add persistent storage for Block Access Lists (BALs) in `core/rawdb/`.
This provides read/write/delete accessors for BALs in the active
key-value store.
---------
Co-authored-by: Jared Wasinger <j-wasinger@hotmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
In this PR, we add support for protocol version eth/70, defined by EIP-7975.
Overall changes:
- Each response is buffered in the peer’s receipt buffer when the
`lastBlockIncomplete` field is true.
- Continued request uses the same request id of its original
request(`RequestPartialReceipts`).
- Partial responses are verified in `validateLastBlockReceipt`.
- Even if all receipts for partial blocks of the request are collected,
those partial results are not sinked to the downloader, to avoid
complexity. This assumes that partial response and buffering occur only
in exceptional cases.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
`pool.signer.Sender(tx)` bypasses the sender cache used by types.Sender,
which can force an extra signature recovery for every promotable tx
(promotion runs frequently). Use `types.Sender(pool.signer, tx)` here to
keep sender derivation cached and consistent.
This PR enables the block validation of keeper in the womir/openvm zkvm.
It also fixes some issues related to building the executables in CI.
Namely, it activates the build which was actually disabled, and also
resolves some resulting build conflicts by fixing the tags.
Co-authored-by: Leo <leo@powdrlabs.com>
Improve speed of import-history command by two orders of magnitude.
Rework ImportHistory to collect up to 2500 blocks per flush instead of
flushing after each block, reducing database commit overhead.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
conn.read() used the actual UDP packet source address for
codec.Decode(), but conn.write() always used tc.remoteAddr. When the
remote node is reachable via multiple Docker networks, the packet source
IP differs from tc.remoteAddr, causing a session key lookup failure in
the codec.
Use tc.remoteAddr.String() consistently in conn.read() so the session
cache key matches what was used during Encode.
In `setOpenTelemetry`, all other fields (Enabled, Endpoint, AuthUser,
AuthPassword, InstanceID, Tags) are guarded by `ctx.IsSet()` checks, so
they only override the config file when explicitly set via CLI flags.
`SampleRatio` was the only field missing this guard, causing the flag
default (`1.0`) to always overwrite whatever was loaded from the config
file.
- Fix OpenTelemetry `SampleRatio` being unconditionally overwritten by
the CLI flag default value (`1.0`), even when the user did not pass
`--rpc.telemetry.sample-ratio`
- This caused config file values for `SampleRatio` to be silently
ignored
Problem:
The max-initcode sentinel moved from core to vm, but RPC pre-check
mapping still depended on core.ErrMaxInitCodeSizeExceeded. This mismatch
could surface inconsistent error mapping when oversized initcode is
submitted through JSON-RPC.
Solution:
- Remove core.ErrMaxInitCodeSizeExceeded from the core pre-check error
set.
- Map max-initcode validation errors in RPC from
vm.ErrMaxInitCodeSizeExceeded.
- Keep the RPC error code mapping unchanged (-38025).
Impact:
- Restores consistent max-initcode error mapping after the sentinel
move.
- Preserves existing JSON-RPC client expectations for error code -38025.
- No consensus, state, or protocol behavior changes.
Fix incorrect key length calculation for `numHashPairings` in
`InspectDatabase`, introduced in #34000.
The `headerHashKey` format is `headerPrefix + num + headerHashSuffix`
(10 bytes), but the check incorrectly included `common.HashLength`,
expecting 42 bytes.
This caused all number -- hash entries to be misclassified as
unaccounted data.
Fix three issues in the binary trie NodeIterator:
1. Empty nodes now properly backtrack to parent and continue iteration
instead of terminating the entire walk early.
2. `HashedNode` resolver handles `nil` data (all-zeros hash) gracefully
by treating it as Empty rather than panicking.
3. Parent update after node resolution guards against stack underflow
when resolving the root node itself.
---------
Co-authored-by: tellabg <249254436+tellabg@users.noreply.github.com>
## Summary
In binary trie mode, `IntermediateRoot` calls `updateTrie()` once per
dirty account. But with the binary trie there is only one unified trie
(`OpenStorageTrie` returns `self`), so each call redundantly does
per-account trie setup: `getPrefetchedTrie`, `getTrie`, slice
allocations for deletions/used, and `prefetcher.used` — all for the same
trie pointer.
This PR replaces the per-account `updateTrie()` calls with a single flat
loop that applies all storage updates directly to `s.trie`. The MPT path
is unchanged. The prefetcher trie replacement is guarded to avoid
overwriting the binary trie that received updates.
This is the phase-1 counterpart to #34021 (H01). H01 fixes the commit
phase (`trie.Commit()` called N+1 times). This PR fixes the update phase
(`updateTrie()` called N times with redundant setup). Same root cause —
unified binary trie operated on per-account — different phases.
## Benchmark (Apple M4 Pro, 500K entries, `--benchtime=10s --count=3`,
on top of #34021)
| Metric | H01 baseline | H01 + this PR | Delta |
|--------|:------------:|:-------------:|:-----:|
| Approve (Mgas/s) | 368 | **414** | **+12.5%** |
| BalanceOf (Mgas/s) | 870 | 875 | +0.6% |
Should be rebased after #34021 is merged.
EIP-7928 brings state reads into consensus by recording accounts and storage accessed during execution in the block access list. As part of the spec, we need to check that there is enough gas available to cover the cost component which doesn't depend on looking up state. If this component can't be covered by the available gas, we exit immediately.
The portion of the call dynamic cost which doesn't depend on state look ups:
- EIP2929 call costs
- value transfer cost
- memory expansion cost
This PR:
- breaks up the "inner" gas calculation for each call variant into a pair of stateless/stateful cost methods
- modifies the gas calculation logic of calls to check stateless cost component first, and go out of gas immediately if it is not covered.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
\`oss-fuzz.sh\` line 38 writes \`#/bin/sh\` instead of \`#!/bin/sh\` as
the shebang of generated fuzz test runner scripts.
\`\`\`diff
-#/bin/sh
+#!/bin/sh
\`\`\`
Without the \`!\`, the kernel does not recognize the interpreter
directive.
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
This PR introduces a new type HistoryPolicy which captures user intent
as opposed to pruning point stored in the blockchain which persists the
actual tail of data in the database.
It is in preparation for the rolling history expiry feature.
It comes with a semantic change: if database was pruned and geth is
running without a history mode flag (or explicit keep all flag) geth
will emit a warning but continue running as opposed to stopping the
world.
## Summary
At tree depths below `log2(NumCPU)` (clamped to [2, 8]), hash the left
subtree in a goroutine while hashing the right subtree inline. This
exploits available CPU cores for the top levels of the tree where
subtree hashing is most expensive. On single-core machines, the parallel
path is disabled entirely.
Deeper nodes use sequential hashing with the existing `sync.Pool` hasher
where goroutine overhead would exceed the hash computation cost. The
parallel path uses `sha256.Sum256` with a stack-allocated buffer to
avoid pool contention across goroutines.
**Safety:**
- Left/right subtrees are disjoint — no shared mutable state
- `sync.WaitGroup` provides happens-before guarantee for the result
- `defer wg.Done()` + `recover()` prevents goroutine panics from
crashing the process
- `!bt.mustRecompute` early return means clean nodes never enter the
parallel path
- Hash results are deterministic regardless of computation order — no
consensus risk
## Benchmark (AMD EPYC 48-core, 500K entries, `--benchtime=10s
--count=3`, post-H01 baseline)
| Metric | Baseline | Parallel | Delta |
|--------|----------|----------|-------|
| Approve (Mgas/s) | 224.5 ± 7.1 | **259.6 ± 2.4** | **+15.6%** |
| BalanceOf (Mgas/s) | 982.9 ± 5.1 | 954.3 ± 10.8 | -2.9% (noise, clean
nodes skip parallel path) |
| Allocs/op (approve) | ~810K | ~700K | -13.6% |
Found this bug while implementing the Amsterdam changes t8n changes for
benchmark test filling in EELS.
Prefixes were incorrectly being stripped on requests over t8n and this
was leading to `fill` correctly catching hash mismatches on the EELS
side for some BAL tests. Though this was caught there, I think this
change might as well be cherry-picked there instead and merged to
`master`.
This PR brings this behavior to parity with EELS for Osaka filling.
There are still some quirks with regards to invalid block tests but I
did not investigate this further.
This PR improves the pbss archive mode. Initial sync
of an archive mode which has the --gcmode archive
flag enabled will be significantly sped up.
It achieves that with the following changes:
The indexer now attempts to process histories in batch whenever
possible.
Batch indexing is enforced when the node is still syncing and the local
chain
head is behind the network chain head.
In this scenario, instead of scheduling indexing frequently alongside
block
insertion, the indexer waits until a sufficient amount of history has
accumulated
and then processes it in a batch, which is significantly more efficient.
---------
Co-authored-by: Sina M <1591639+s1na@users.noreply.github.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
## Summary
**Bug fix.** In Verkle mode, all state objects share a single unified
trie (`OpenStorageTrie` returns `self`). During `stateDB.commit()`, the
main account trie is committed via `s.trie.Commit(true)`, which calls
`CollectNodes` to traverse and serialize the entire tree. However, each
dirty account's `obj.commit()` also calls `s.trie.Commit(false)` on the
**same trie object**, redundantly traversing and serializing the full
tree once per dirty account.
With N dirty accounts per block, this causes **N+1 full-tree
traversals** instead of 1. On a write-heavy workload (2250 SSTOREs),
this produces ~131 GB of allocations per block from duplicate NodeSet
creation and serialization. It also causes a latent data race from N+1
goroutines concurrently calling `CollectNodes` on shared `InternalNode`
objects.
This commit adds an `IsVerkle()` early return in `stateObject.commit()`
to skip the redundant `trie.Commit()` call.
## Benchmark (AMD EPYC 48-core, 500K entries, `--benchtime=10s
--count=3`)
| Metric | Baseline | Fixed | Delta |
|--------|----------|-------|-------|
| Approve (Mgas/s) | 4.16 ± 0.37 | **220.2 ± 10.1** | **+5190%** |
| BalanceOf (Mgas/s) | 966.2 ± 8.1 | 971.0 ± 3.0 | +0.5% |
| Allocs/op (approve) | 136.4M | 792K | **-99.4%** |
Resolves the TODO in statedb.go about the account trie commit being
"very heavy" and "something's wonky".
---------
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
cgo builds have been broken in FreeBSD ports because of the hid lib.
@enriquefynn has made a temporary patch, but the fix has been merged in
the master branch, so let's reflect that here.
The signify flag in `doWindowsInstaller` was defined as "signify key"
(with a space), making it impossible to pass via CLI (`-signify
<value>`). This meant the Windows installer signify signing was silently
never executed.
Fix by renaming the flag to "signify", consistent with `doArchive` and
`doKeeperArchive`.
The slotNumber field was being passed as a raw *uint64 to the JSON
marshaler, which serializes it as a plain decimal integer (e.g. 159).
All Ethereum JSON-RPC quantity fields must be hex-encoded per spec.
Wrap with hexutil.Uint64 to match the encoding of other numeric header
fields like blobGasUsed and excessBlobGas.
Co-authored-by: qu0b <stefan@starflinger.eu>
This PR improves `db inspect` classification accuracy in
`core/rawdb/database.go` by tightening key-shape checks for:
- `Block number->hash`
- `Difficulties (deprecated)`
Previously, both categories used prefix/suffix heuristics and could
mis-bucket unrelated entries.
Binary tree hashing is quite slow, owing to many factors. One of them is
the GC pressure that is the consequence of allocating many hashers, as a
binary tree has 4x the size of an MPT. This PR introduces an
optimization that already exists for the MPT: keep a pool of hashers, in
order to reduce the amount of allocations.
Implement EIP7954, This PR raises the maximum contract code size
to 32KiB and initcode size to 64KiB , following https://eips.ethereum.org/EIPS/eip-7954
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
`TestSubscribePendingTxHashes` hangs indefinitely because pending tx
events are permanently missed due to a race condition in
`NewPendingTransactions` (and `NewHeads`). Both handlers called their
event subscription functions (`SubscribePendingTxs`,
`SubscribeNewHeads`) inside goroutines, so the RPC handler returned the
subscription ID to the client before the filter was installed in the
event loop. When the client then sent a transaction, the event fired but
no filter existed to catch it — the event was silently lost.
- Move `SubscribePendingTxs` and `SubscribeNewHeads` calls out of
goroutines so filters are installed synchronously before the RPC
response is sent, matching the pattern already used by `Logs` and
`TransactionReceipts`
<!-- START COPILOT CODING AGENT TIPS -->
---
💬 We'd love your input! Share your thoughts on Copilot coding agent in
our [2 minute survey](https://gh.io/copilot-coding-agent-survey).
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: s1na <1591639+s1na@users.noreply.github.com>
Fixes https://github.com/ethereum/go-ethereum/issues/33907
Notably there is a behavioral change:
- Previously Geth will refuse to restart if the existing trienode
history is gapped with the state data
- With this PR, the gapped trienode history will be entirely reset and
being constructed from scratch
This PR adds a cmd tool fetchpayload which connects to a
node and gets all the information in order to create a serialized
payload that can then be passed to the zkvm.
This PR allows users to prune their nodes up to the Prague fork. It
indirectly depends on #32157 and can't really be merged before eraE
files are widely available for download.
The `--history.chain` flag becomes mandatory for `prune-history`
command. Here I've listed all the edge cases that can happen and how we
behave:
## prune-history Behavior
| From | To | Result |
|-------------|--------------|--------------------------|
| full | postmerge | ✅ prunes |
| full | postprague | ✅ prunes |
| postmerge | postprague | ✅ prunes further |
| postprague | postmerge | ❌ can't unprune |
| any | all | ❌ use import-history |
## Node Startup Behavior
| DB State | Flag | Result |
|-------------|--------------|----------------------------------------------------------------|
| fresh | postprague | ✅ syncs from Prague |
| full | postprague | ❌ "run prune-history first" |
| postmerge | postprague | ❌ "run prune-history first" |
| postprague | postmerge | ❌ "can't unprune, use import-history or fix
flag" |
| pruned | all | ✅ accepts known prune points |
The `--remove.chain` flag incorrectly described itself as selecting
"state data" for removal, which could mislead operators into removing
the wrong data category. This corrects the description to accurately
reflect that the flag targets chain data (block bodies and receipts).
This PR contains two changes:
Firstly, the finalized header will be resolved from local chain if it's
not recently announced via the `engine_newPayload`.
What's more importantly is, in the downloader, originally there are two
code paths to push forward the pivot point block, one in the beacon
header fetcher (`fetchHeaders`), and another one is in the snap content
processer (`processSnapSyncContent`).
Usually if there are new blocks and local pivot block becomes stale, it
will firstly be detected by the `fetchHeaders`. `processSnapSyncContent`
is fully driven by the beacon headers and will only detect the stale pivot
block after synchronizing the corresponding chain segment. I think the
detection here is redundant and useless.
We got a report for a bug in the tracing journal which has the
responsibility to emit events for all state that must be reverted.
The edge case is as follows: on CREATE operations the nonce is
incremented. When a create frame reverts, the nonce increment associated
with it does **not** revert. This works fine on master. Now one step
further: if the parent frame reverts tho, the nonce **should** revert
and there is the bug.
This PR fixes a regression introduced in https://github.com/ethereum/go-ethereum/pull/33836/changes
Before PR 33836, running mainnet would automatically bump the cache size
to 4GB and trigger a cache re-calculation, specifically setting the key-value
database cache to 2GB.
After PR 33836, this logic was removed, and the cache value is no longer
recomputed if no command line flags are specified. The default key-value
database cache is 512MB.
This PR bumps the default key-value database cache size alongside the
default cache size for other components (such as snapshot) accordingly.
I observed failing tests in Hive `engine-withdrawals`:
-
https://hive.ethpandaops.io/#/test/generic/1772351960-ad3e3e460605c670efe1b4f4178eb422?testnumber=146
-
https://hive.ethpandaops.io/#/test/generic/1772351960-ad3e3e460605c670efe1b4f4178eb422?testnumber=147
```shell
DEBUG (Withdrawals Fork on Block 2): NextPayloadID before getPayloadV2:
id=0x01487547e54e8abe version=1
>> engine_getPayloadV2("0x01487547e54e8abe")
<< error: {"code":-38005,"message":"Unsupported fork"}
FAIL: Expected no error on EngineGetPayloadV2: error=Unsupported fork
```
The same failure pattern occurred for Block 3.
Per Shanghai engine_getPayloadV2 spec, pre-Shanghai payloads should be
accepted via V2 and returned as ExecutionPayloadV1:
- executionPayload: ExecutionPayloadV1 | ExecutionPayloadV2
- ExecutionPayloadV1 MUST be returned if payload timestamp < Shanghai
timestamp
- ExecutionPayloadV2 MUST be returned if payload timestamp >= Shanghai
timestamp
Reference:
-
https://github.com/ethereum/execution-apis/blob/main/src/engine/shanghai.md#engine_getpayloadv2
Current implementation only allows GetPayloadV2 on the Shanghai fork
window (`[]forks.Fork{forks.Shanghai}`), so pre-Shanghai payloads are
rejected with Unsupported fork.
If my interpretation of the spec is incorrect, please let me know and I
can adjust accordingly.
---------
Co-authored-by: muzry.li <muzry.li1@ambergroup.io>
Updates go-eth-kzg to
https://github.com/crate-crypto/go-eth-kzg/releases/tag/v1.5.0
Significantly reduces the allocations in VerifyCellProofBatch which is
around ~5% of all allocations on my node
---------
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
Reduce allocations in calculation of tx cost.
---------
Co-authored-by: weixie.cui <weixie.cui@okg.com>
Co-authored-by: Sina M <1591639+s1na@users.noreply.github.com>
`GenerateChain` commits trie nodes asynchronously, and it can happen
that some nodes aren't making it to the db in time for `GenerateChain`
to open it and find the data it is looking for.
This is an optimization that existed for verkle and the MPT, but that
got dropped during the rebase.
Mark the nodes that were modified as needing recomputation, and skip the
hash computation if this is not needed. Otherwise, the whole tree is
hashed, which kills performance.
The computation of `MAIN_STORAGE_OFFSET` was incorrect, causing the last
byte of the stem to be dropped. This means that there would be a
collision in the hash computation (at the preimage level, not a hash
collision of course) if two keys were only differing at byte 31.
Eth currently has a flaky test, related to the tx fetcher.
The issue seems to happen when Unsubscribe is called while sub is nil.
It seems that chain.Stop() may be invoked before the loop starts in some
tests, but the exact cause is still under investigation through repeated
runs. I think this change will at least prevent the error.
The BatchSpanProcessor queue size was incorrectly set to
DefaultMaxExportBatchSize (512) instead of DefaultMaxQueueSize (2048).
I noticed the issue on bloatnet when analyzing the block building
traces. During a particular run, the miner was including 1000
transactions in a single block. When telemetry is enabled, the miner
creates a span for each transaction added to the block. With the queue
capped at 512, spans were silently dropped when production outpaced the
span export, resulting in incomplete traces with orphaned spans. While
this doesn't eliminate the possibility of drops under extreme
load, using the correct default restores the 4x buffer between queue
capacity and export batch size that the SDK was designed around.
Pebble maintains a batch pool to recycle the batch object. Unfortunately
batch object must be
explicitly returned via `batch.Close` function. This PR extends the
batch interface by adding
the close function and also invoke batch.Close in some critical code
paths.
Memory allocation must be measured before merging this change. What's
more, it's an open
question that whether we should apply batch.Close as much as possible in
every invocation.
For bal-devnet-3 we need to update the EIP-8024 implementation to the
latest spec changes: https://github.com/ethereum/EIPs/pull/11306
> Note: I deleted tests not specified in the EIP bc maintaining them
through EIP changes is too error prone.
Return the Amsterdam instruction set from `LookupInstructionSet` when
`IsAmsterdam` is true, so Amsterdam rules no longer fall through to the
Osaka jump table.
---------
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
In `buildPayload()`, the background goroutine uses a `select` to wait on
the recommit timer, the stop channel, and the end timer. When both
`timer.C` and `payload.stop` are ready simultaneously, Go's `select`
picks a case non-deterministically. This means the loop can enter the
`timer.C` case and perform an unnecessary `generateWork` call even after
the payload has been resolved.
Add a non-blocking check of `payload.stop` at the top of the `timer.C`
case to exit immediately when the payload has already been delivered.
We got a report that after v1.17.0 a geth-teku node starts to time out
on engine_getBlobsV2 after around 3h of operation. The culprit seems to
be our optional http2 service which Teku attempts first. The exact cause
of the timeout is still unclear.
This PR is more of a workaround than proper fix until we figure out the
underlying issue. But I don't expect http2 to particularly benefit
engine API throughput and latency. Hence it should be fine to disable it
for now.
The payload rebuild loop resets the timer with the full Recommit
duration after generateWork returns, making the actual interval
generateWork_elapsed + Recommit instead of Recommit alone.
Since fillTransactions uses Recommit (2s) as its timeout ceiling, the
effective rebuild interval can reach ~4s under heavy blob workloads —
only 1–2 rebuilds in a 6s half-slot window instead of the intended 3.
Fix by subtracting elapsed time from the timer reset.
### Before this fix
```
t=0s timer fires, generateWork starts
t=2s fillTransactions times out, timer.Reset(2s)
t=4s second rebuild starts
t=6s CL calls getPayload — gets the t=2s result (1 effective rebuild)
```
### After
```
t=0s timer fires, generateWork starts
t=2s fillTransactions times out, timer.Reset(2s - 2s = 0)
t=2s second rebuild starts immediately
t=4s timer.Reset(0), third rebuild starts
t=6s CL calls getPayload — gets the t=4s result (3 effective rebuilds)
```
This PR introduces a threshold (relative to current market base fees),
below which we suppress the diffusion of low fee transactions. Once base
fees go down, and if the transactions were not evicted in the meantime,
we release these transactions.
The PR also updates the bucketing logic to be more sensitive, removing
the extra logarithm. Blobpool description is also
updated to reflect the new behavior.
EIP-7918 changed the maximim blob fee decrease that can happen in a
slot. The PR also updates fee jump calculation to reflect this.
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
With this, we are dropping support for protocol version eth/68. The only supported
version is eth/69 now. The p2p receipt encoding logic can be simplified a lot, and
processing of receipts during sync gets a little faster because we now transform
the network encoding into the database encoding directly, without decoding the
receipts first.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
fix the flaky test found in
https://ci.appveyor.com/project/ethereum/go-ethereum/builds/53601688/job/af5ccvufpm9usq39
1. increase the timeout from 3+1s to 15s, and use timer instead of
sleep(in the CI env, it may need more time to sync the 1024 blocks)
2. add `synced.Load()` to ensure the full async chain is finished
Signed-off-by: Delweng <delweng@gmail.com>
We didn't upgrade to 1.25, so this jumps over one version. I want to
upgrade all builds to Go 1.26 soon, but let's start with the Docker
build to get a sense of any possible issues.
Previously, handshake timeouts were recorded as generic peer errors
instead of timeout errors. waitForHandshake passed a raw
p2p.DiscReadTimeout into markError, but markError classified errors only
via errors.Unwrap(err), which returns nil for non-wrapped errors. As a
result, the timeoutError meter was never incremented and all such
failures fell into the peerError bucket.
This change makes markError switch on the base error, using
errors.Unwrap(err) when available and falling back to the original error
otherwise. With this adjustment, p2p.DiscReadTimeout is correctly mapped
to timeoutError, while existing behaviour for the other wrapped sentinel
errors remains unchanged
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
inside tx.GasPrice()/GasFeeCap()/GasTipCap() already new a big.Int.
bench result:
```
goos: darwin
goarch: arm64
pkg: github.com/ethereum/go-ethereum/core
cpu: Apple M4
│ old.txt │ new.txt │
│ sec/op │ sec/op vs base │
TransactionToMessage-10 240.1n ± 7% 175.1n ± 7% -27.09% (p=0.000 n=10)
│ old.txt │ new.txt │
│ B/op │ B/op vs base │
TransactionToMessage-10 544.0 ± 0% 424.0 ± 0% -22.06% (p=0.000 n=10)
│ old.txt │ new.txt │
│ allocs/op │ allocs/op vs base │
TransactionToMessage-10 17.00 ± 0% 11.00 ± 0% -35.29% (p=0.000 n=10)
```
benchmark code:
```
// Copyright 2025 The go-ethereum Authors
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The go-ethereum library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
package core
import (
"math/big"
"testing"
"github.com/ethereum/go-ethereum/common"
"github.com/ethereum/go-ethereum/core/types"
"github.com/ethereum/go-ethereum/crypto"
"github.com/ethereum/go-ethereum/params"
)
// BenchmarkTransactionToMessage benchmarks the TransactionToMessage function.
func BenchmarkTransactionToMessage(b *testing.B) {
key, _ := crypto.GenerateKey()
signer := types.LatestSigner(params.TestChainConfig)
to := common.HexToAddress("0x000000000000000000000000000000000000dead")
// Create a DynamicFeeTx transaction
txdata := &types.DynamicFeeTx{
ChainID: big.NewInt(1),
Nonce: 42,
GasTipCap: big.NewInt(1000000000), // 1 gwei
GasFeeCap: big.NewInt(2000000000), // 2 gwei
Gas: 21000,
To: &to,
Value: big.NewInt(1000000000000000000), // 1 ether
Data: []byte{0x12, 0x34, 0x56, 0x78},
AccessList: types.AccessList{
types.AccessTuple{
Address: common.HexToAddress("0x0000000000000000000000000000000000000001"),
StorageKeys: []common.Hash{
common.HexToHash("0x0000000000000000000000000000000000000000000000000000000000000001"),
},
},
},
}
tx, _ := types.SignNewTx(key, signer, txdata)
baseFee := big.NewInt(1500000000) // 1.5 gwei
b.ResetTimer()
b.ReportAllocs()
for i := 0; i < b.N; i++ {
_, err := TransactionToMessage(tx, signer, baseFee)
if err != nil {
b.Fatal(err)
}
}
}
l
```
From the https://eips.ethereum.org/EIPS/eip-7928
> SELFDESTRUCT (in-transaction): Accounts destroyed within a transaction
MUST be included in AccountChanges without nonce or code changes.
However, if the account had a positive balance pre-transaction, the
balance change to zero MUST be recorded. Storage keys within the self-destructed
contracts that were modified or read MUST be included as a storage_reads
entry.
The storage read against the empty contract (zero storage) should also
be recorded in the BAL's readlist.
https://eips.ethereum.org/EIPS/eip-7928 spec:
> Precompiled contracts: Precompiles MUST be included when accessed.
If a precompile receives value, it is recorded with a balance change.
Otherwise, it is included with empty change lists.
The precompiled contracts are not explicitly touched when they are
invoked since Amsterdam fork.
The fetcher should not fetch transactions that are already on chain.
Until now we were only checking in the txpool, but that does not have
the old transaction. This was leading to extra fetches of transactions
that were announced by a peer but are already on chain.
Here we extend the check to the chain as well.
All five `revert*Request` functions (account, bytecode, storage,
trienode heal, bytecode heal) remove the request from the tracked set
but never restore the peer to its corresponding idle pool. When a
request times out and no response arrives, the peer is permanently lost
from the idle pool, preventing new work from being assigned to it.
In normal operation mode (snap-sync full state) this bug is masked by
pivot movement (which resets idle pools via new Sync() cycles every ~15
minutes) and peer churn (reconnections re-add peers via Register()).
However in scenarios like the one I have running my (partial-stateful
node)[https://github.com/ethereum/go-ethereum/pull/33764] with
long-running sync cycles and few peers, all peers can eventually leak
out of the idle pools, stalling sync entirely.
Fix: after deleting from the request map, restore the peer to its idle
pool if it is still registered (guards against the peer-drop path where
Unregister already removed the peer). This mirrors the pattern used in
all five On* response handlers.
This only seems to manifest in peer-thirstly scenarios as where I find
myself when testing snapsync for the partial-statefull node).
Still, thought was at least good to raise this point. Unsure if required
to discuss or not
Implements the new eth_getStorageValues method. It returns storage
values for a list of contracts.
Spec: https://github.com/ethereum/execution-apis/pull/756
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
The PR exposes the InfuxDB reporting interval as a CLI parameter, which
was previously fixed 10s. Default is still kept at 10s.
Note that decreasing the interval comes with notable extra traffic and
load on InfluxDB.
This changes the challenge resend logic again to use the existing
`ChallengeData` field of `v5wire.Whoareyou` instead of storing a second
copy of the packet in `Whoareyou.Encoded`. It's more correct this way
since `ChallengeData` is supposed to be the data that is used by the ID
verification procedure.
Also adapts the cross-client test to verify this behavior.
Follow-up to #31543
In src/ethereum/forks/amsterdam/vm/interpreter.py:299-304, the caller
address is
only tracked for block level accessList when there's a value transfer:
```python
if message.should_transfer_value and message.value != 0:
# Track value transfer
sender_balance = get_account(state, message.caller).balance
recipient_balance = get_account(state, message.current_target).balance
track_address(message.state_changes, message.caller) # Line 304
```
Since system transactions have should_transfer_value=False and value=0,
this condition is never met, so the caller (SYSTEM_ADDRESS) is not
tracked.
This condition is applied for the syscall in the geth implementation,
aligning with the spec of EIP7928.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Adds `--opcode.count=<file>` flag to `evm t8n` that writes per-opcode
execution frequency counts to a JSON file (relative to
`--output.basedir`).
---------
Co-authored-by: MariusVanDerWijden <m.vanderwijden@live.de>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This changes the p2p protocol handlers to delay message decoding. It's
the first part of a larger change that will delay decoding all the way
through message processing. For responses, we delay the decoding until
it is confirmed that the response matches an active request and does not
exceed its limits.
In order to make this work, all messages have been changed to use
rlp.RawList instead of a slice of the decoded item type. For block
bodies specifically, the decoding has been delayed all the way until
after verification of the response hash.
The role of p2p/tracker.Tracker changes significantly in this PR. The
Tracker's original purpose was to maintain metrics about requests and
responses in the peer-to-peer protocols. Each protocol maintained a
single global Tracker instance. As of this change, the Tracker is now
always active (regardless of metrics collection), and there is a
separate instance of it for each peer. Whenever a response arrives, it
is first verified that a request exists for it in the tracker. The
tracker is also the place where limits are kept.
This PR adds OpenTelemetry tracing configuration to geth via
command-line flags. When enabled, geth initializes the global
OpenTelemetry TracerProvider and installs standard trace context
propagation. When disabled (the default), tracing remains a no-op and
behavior is unchanged.
Co-authored-by: Felix Lange <fjl@twurst.com>
The endSpan closure accepted error by value, meaning deferred calls like
defer spanEnd(err) captured the error at defer-time (always nil), not at
function-return time. This meant errors were never recorded on spans.
- Changed endSpan to accept *error
- Updated all call sites in rpc/handler.go to pass error pointers, and
adjusted handleCall to avoid propagating child-span errors to the parent
- Added TestTracingHTTPErrorRecording to verify that errors from RPC
methods are properly recorded on the rpc.runMethod span
I removed `Iterator.Count` in #33840, because it appeared to be unused
and did not provide the documented invariant: the returned count should
always be an upper bound on the number of iterations allowed by `Next`.
In order to make `Count` work, the semantics of `CountValues` has to
change to return the number of items up and including the invalid one. I
have reviewed all callsites of `CountValues` to assess if changing this
is safe. There aren't that many, and the only call that doesn't check
the error and return is in the trie node parser,
`trie.decodeNodeUnsafe`. There, we distinguish the node type based on
the number of items, and it previously returned an error for item count
zero. In order to avoid any potential issue that could result from this
change, I'm adding an error check in that function, though it isn't
necessary.
This changes `RawList` to ensure the count of items is always valid.
Lists with invalid structure, i.e. ones where an element exceeds the
size of the container, are now detected during decoding of the `RawList`
and thus cannot exist.
Also remove `RawList.Empty` since it is now fully redundant, and
`Iterator.Count` since it returns incorrect results in the presence of
invalid input. There are no callers of these methods (yet).
The reasoning for using the cleartext format here is that the JSON-RPC
API is internal only. Providers which expose it publicly already put it
behind a proxy which handles also the encryption.
This fixes two cases where `Iterator.Err()` was misused. The method will
only return an error after `Next()` has returned false, so it makes no
sense to check for the error within the loop itself.
Most uses of the iterator are like this:
it, _ := rlp.NewListIterator(data)
for it.Next() {
do(it.Value())
}
This doesn't require the iterator to be a pointer and it's better to
have it stack-allocated. AFAIK the compiler cannot prove it is OK to
stack-allocate when it is returned as a pointer because the methods of
`Iterator` use pointer receiver and also mutate the object.
The iterator type was not exported until very recently, so I think it is
still OK to change this API.
GetStorage and DeleteStorage used GetBinaryTreeKey to compute the tree
key, while UpdateStorage used GetBinaryTreeKeyStorageSlot. The latter
applies storage slot remapping (header offset for slots <64, main
storage prefix for the rest), so reads and deletes were targeting
different tree locations than writes.
Replace GetBinaryTreeKey with GetBinaryTreeKeyStorageSlot in both
GetStorage and DeleteStorage to match UpdateStorage. Add a regression
test that verifies the write→read→delete→read round-trip for main
storage slots.
The `decodeRef` function used `size > hashLen` to reject oversized
embedded nodes, but this incorrectly allowed nodes of exactly 32 bytes
through. The encoding side (hasher.go, stacktrie.go) consistently uses
`len(enc) < 32` to decide whether to embed a node inline, meaning nodes
of 32+ bytes are always hash-referenced. The error message itself
already stated `want size < 32`, confirming the intended threshold.
Changed `size > hashLen` to `size >= hashLen` in `decodeRef` to align
the decoding validation with the encoding logic, the Yellow Paper spec,
and the surrounding comments.
This PR fixes a panic in a corner case situation when a `ChainEvent` is
received by `eth.Ethereum.updateFilterMapsHeads()` but the given chain
section does not exist in `BlockChain` any more. This can happen during
chain rewind because chain events are processed asynchronously. Ignoring
the event in this case is ok, the final event will point to the final
rewound head and the indexer will be updated.
Note that similar issues will not happen once we transition to
https://github.com/ethereum/go-ethereum/pull/32292 and the new indexer
built on top of this. Until then, the current fix should be fine.
This PR makes `TestEIP8024_Execution` verify explicit error types (e.g.,
`ErrStackUnderflow` vs `ErrInvalidOpCode`) rather than accepting any
error. It also fails fast on unexpected opcodes in the mini-interpreter
to avoid false positives from missing opcode handling.
Here is a draft for the New EraE implementation. The code follows along
with the spec listed at https://hackmd.io/pIZlxnitSciV5wUgW6W20w.
---------
Co-authored-by: shantichanal <158101918+shantichanal@users.noreply.github.com>
Co-authored-by: lightclient <lightclient@protonmail.com>
Co-authored-by: MariusVanDerWijden <m.vanderwijden@live.de>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
### Problem
`HasBody` and `HasReceipts` returned `true` for pruned blocks because
they only checked `isCanon()` which verifies the hash table — but
hash/header tables have `prunable: false` while body/receipt tables have
`prunable: true`.
After `TruncateTail()`, hashes still exist but bodies/receipts are gone.
This caused inconsistency: `HasBody()` returns `true`, but `ReadBody()`
returns `nil`.
### Changes
Both functions now check `db.Tail()` when the block is in ancient store.
If `number < tail`, the data has been pruned and the function correctly
returns `false`.
This aligns `HasBody`/`HasReceipts` behavior with
`ReadBody`/`ReadReceipts` and fixes potential issues in
`skeleton.linked()` which relies on these checks during sync.
Follow-up to https://github.com/ethereum/go-ethereum/pull/33748
Same issue - ResettingTimer can be registered via loadOrRegister() but
GetAll() silently drops it during JSON export. The prometheus exporter
handles it fine (collector.go:70), so this is just an oversight in the
JSON path.
Note: ResettingTimer.Snapshot() resets the timer by design, which is
consistent with how the prometheus exporter uses it.
This adds a new type wrapper that decodes as a list, but does not
actually decode the contents of the list. The type parameter exists as a
marker, and enables decoding the elements lazily. RawList can also be
used for building a list incrementally.
The upstream libray has removed the assembly-based implementation of
keccak. We need to maintain our own library to avoid a peformance
regression.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
kzg4844.Blob is 131072 bytes. Using `for _, blob := range` copies the
entire blob on each iteration. With up to 6 blobs per transaction, this
wastes ~768KB of memory copies.
Switch to index-based iteration and pass pointers directly.
The `Witness` method was not implemented for the binary tree, which
caused `debug_excutionWitness` to panic. This PR fixes that.
Note that the `TransitionTrie` version isn't implemented, and that's on
purpose: more thought must be given to what should go in the global
witness.
I recently went on a longer flight and started profiling the geth block
production pipeline.
This PR contains a bunch of individual fixes split into separate
commits.
I can drop some if necessary.
Benchmarking is not super easy, the benchmark I wrote is a bit
non-deterministic.
I will try to write a better benchmark later
```
goos: linux
goarch: amd64
pkg: github.com/ethereum/go-ethereum/miner
cpu: Intel(R) Core(TM) Ultra 7 155U
│ /tmp/old.txt │ /tmp/new.txt │
│ sec/op │ sec/op vs base │
BuildPayload-14 141.5µ ± 3% 146.0µ ± 6% ~ (p=0.346 n=200)
│ /tmp/old.txt │ /tmp/new.txt │
│ B/op │ B/op vs base │
BuildPayload-14 188.2Ki ± 4% 177.4Ki ± 4% -5.71% (p=0.018 n=200)
│ /tmp/old.txt │ /tmp/new.txt │
│ allocs/op │ allocs/op vs base │
BuildPayload-14 2.703k ± 4% 2.453k ± 5% -9.25% (p=0.000 n=200)
```
Preallocates slices with known capacity in `stateSet.encode()` and
`StateSetWithOrigin.encode()` methods to eliminate redundant
reallocations during serialization.
Preallocate capacity for `keyOffsets` and `valOffsets` slices in
`decodeRestartTrailer` since the exact size (`nRestarts`) is known
upfront.
---------
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
core/state: add bounds check in heap eviction loop
Add len(h) > 0 check before accessing h[0] to prevent potential panic
and align with existing heap access patterns in txpool, p2p, and mclock
packages.
Fix ECIES invalid-curve handling in RLPx handshake (reject invalid
ephemeral pubkeys early)
- Add curve validation in crypto/ecies.GenerateShared to reject invalid
public keys before ECDH.
- Update RLPx PoC test to assert invalid curve points fail with
ErrInvalidPublicKey.
Motivation / Context
RLPx handshake uses ECIES decryption on unauthenticated network input.
Prior to this change, an invalid-curve ephemeral public key would
proceed into ECDH and only fail at MAC verification, returning
ErrInvalidMessage. This allows an oracle on decrypt success/failure and
leaves the code path vulnerable to invalid-curve/small-subgroup attacks.
The fix enforces IsOnCurve validation up front.
Heartbeats are used to drop non-executable transactions from the queue.
The timeout mechanism was not clearly documented, and it was updates
also when not necessary.
This PR restores the previous Pebble configuration, disabling seek compaction.
This feature is still needed by hash mode archive node, mitigating the
overhead of frequent compaction.
Implement standardized JSON format for slow block logging to enable
cross-client performance analysis and protocol research.
This change is part of the Cross-Client Execution Metrics initiative
proposed by Gary Rong: https://hackmd.io/dg7rizTyTXuCf2LSa2LsyQ
The standardized metrics enabled data-driven analysis like the EIP-7907
research: https://ethresear.ch/t/data-driven-analysis-on-eip-7907/23850
JSON format includes:
- block: number, hash, gas_used, tx_count
- timing: execution_ms, total_ms
- throughput: mgas_per_sec
- state_reads: accounts, storage_slots, bytecodes, code_bytes
- state_writes: accounts, storage_slots, bytecodes
- cache: account/storage/code hits, misses, hit_rate
This should come after merging #33522
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Based on [EIP-7864](https://eips.ethereum.org/EIPS/eip-7864), the tree
index should be 32 bytes instead of 31 bytes.
```
def get_tree_key(address: Address32, tree_index: int, sub_index: int):
# Assumes STEM_SUBTREE_WIDTH = 256
return tree_hash(address + tree_index.to_bytes(32, "little"))[:31] + bytes(
[sub_index]
)
```
This is a tweak to the wasm build, that expects the `geth_io` namespace
to expect a `geth_io` module, providing a `len` and `read` methods. This
will be provided by the WASM interface in sp1. This forces an API change
on the OpenVM side, but the interface on their side is still being
designed, so we should proceed with this change, and we'll make a
different tag for OpenVM if this can't work for them.
Co-authored-by: wakabat <wakabat@protonmail.com>
This PR optimizes the historical trie node reader by reworking how data
is accessed and memory is managed, reducing allocation overhead
significantly.
Specifically:
- Instead of decoding an entire history object to locate a specific trie node,
the reader now searches directly within the history.
- Besides, slice pre-allocation can avoid unnecessary deep-copy significantly.
This PR optimizes memory allocation in StateTrie.PrefetchAccount() and
StateTrie.PrefetchStorage() by preallocating slice capacity when the
final size is known.
This PR extends the statistics of contract code read by adding these
fields:
- **CacheHitBytes**: the total number of bytes served by cache
- **CacheMissBytes**: the total number of bytes read on cache miss
- **CodeReadBytes**: the total number of bytes for contract code read
Calling `pool.priced.Removed` is needed to keep is sync with
`pool.all.Remove`.
It was called in other occurances, but not here.
The counter is used for internal heap management. It was working even without this, just not calling reheap at the intended frequency.
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
This PR adds metrics that count the number of accounts having transactions
in the txpool. Together with the transaction count this can be used as a
simple indicator of the diversity of transactions in the pool.
Note: as an alternative implementation, we could use a periodic or event
driven update of these Gauges using len.
I've preferred this implementation to match what we have for the pool
sizes.
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Fixes#33630
Sort self-destructed addresses before emitting hooks in Finalise() to
ensure deterministic ordering and fix flaky test
TestHooks_OnCodeChangeV2.
---------
Co-authored-by: jwasinger <j-wasinger@hotmail.com>
This adds support for Grafana Pyroscope, a continuous profiling solution.
The client is configured similarly to metrics, i.e. run
geth --pyroscope --pyroscope.server=https://...
This commit is a resubmit of #33261 with some changes.
---------
Co-authored-by: Carlos Bermudez Porto <cbermudez.dev@gmail.com>
This PR reverts a part of changes brought by https://github.com/ethereum/go-ethereum/pull/33281/changes
Specifically, read-only protection should always be enforced at the opcode level,
regardless of whether the check has already been performed during gas metering.
It should act as a gatekeeper, otherwise, it is easy to introduce errors by adding
new gas measurement logic without consistently applying the read-only protection.
Adding an RPC flag to limit the block range size for eth_getLogs and
eth_newFilter requests.
closing https://github.com/ethereum/go-ethereum/issues/24508
---------
Co-authored-by: MariusVanDerWijden <m.vanderwijden@live.de>
The core part of this PR that we need to adopt is to move the code and
nonce change hook invocations to occur at tx finalization, instead of
when the selfdestruct opcode is called.
Additionally:
* remove `SelfDestruct6780` now that it is essentially the same as
`SelfDestruct` just gated by `is new contract`
* don't duplicate `BalanceIncreaseSelfdestruct` (transfer to recipient
of selfdestruct) in the hooked statedb and in the opcode handler for the
selfdestruct opcode.
* balance is burned immediately when the beneficiary of the selfdestruct
is the sender, and the contract was created in the same transaction.
Previously we emit two balance increases to the recipient (see above
point), and a balance decrease from the sender.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: lightclient <lightclient@protonmail.com>
There's no need to perform the subsequent state access on the target if
we already know that we are out of gas.
This aligns the state access behavior of selfdestruct with EIP-7928
This PR causes execution to terminate at the gas handler in the case of
sstore/call if they are invoked in a static execution context.
This aligns the behavior with EIP 7928 by ensuring that we don't record
any state reads in the access list from an SSTORE/CALL in this
circumstance.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Remove a large amount of duplicate code from the tx_fetcher tests.
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Co-authored-by: lightclient <lightclient@protonmail.com>
The bitmap is used in compact-encoded trie nodes to indicate which elements
have been modified. The bitmap format has been updated to use big-endian
encoding.
Bit positions are numbered from 0 to 15, where position 0 corresponds to
the most significant bit of b[0], and position 15 corresponds to the least
significant bit of b[1].
This PR adds support for the extraction of OpenTelemetry trace context
from incoming JSON-RPC request headers, allowing geth spans to be linked
to upstream traces when present.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Add Open Telemetry tracing inside the RPC server to help attribute runtime costs within `handler.handleCall()`. In particular, it allows us to distinguish time spent decoding arguments, invoking methods via reflection, and actually executing the method and constructing/encoding JSON responses.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Updated the `avail` calculation to correctly compute remaining capacity:
`buf.limit - len(buf.output)`, ensuring the buffer never exceeds its
configured limit regardless of how many times `Write()` is called.
The coverage build path was generating go test commands with a bogus
-tags flag that held the coverpkg value, so the run kept failing. I
switched coverbuild to treat the optional argument as an override for
-coverpkg and stopped passing coverpkg from the caller. Now the script
emits a clean go test invocation that should actually succeed.
This PR fixes an issue where the tx indexer would repeatedly try to
“unindex” a block with a missing body, causing a spike in CPU usage.
This change skips these blocks and advances the index tail. The fix was
verified both manually on a local development chain and with a new test.
resolves#33371
This PR fixes an issue where `evm statetest` would not verify the
post-state root hash if the test case expected an exception (e.g.
invalid transaction).
The fix involves:
1. Modifying `tests/state_test_util.go` in the `Run` method.
2. When an expected error occurs (`err != nil`), we now check if
`post.Root` is defined.
3. If defined, we recalculate the intermediate root from the current
state (which is reverted to the pre-transaction snapshot upon error).
4. We use `GetChainConfig` and `IsEIP158` to ensure the correct state
clearing rules are applied when calculating the root, avoiding
regressions on forks that require EIP-158 state clearing.
5. If the calculated root mismatches the expected root, the test now
fails.
This ensures that state tests are strictly verified against their
expected post-state, even for failure scenarios.
Fixes issue #33527
---------
Co-authored-by: MariusVanDerWijden <m.vanderwijden@live.de>
- pass `rpc.BlockNumberOrHash` directly to `eth_getBlockReceipts` so
`requireCanonical` and other fields survive
- aligns `BlockReceipts` with other `ethclient` methods and re-enables
canonical-only receipt queries
Allow the blobpool to accept blobs out of nonce order
Previously, we were dropping blobs that arrived out-of-order. However,
since fetch decisions are done on receiver side,
out-of-order delivery can happen, leading to inefficiencies.
This PR:
- adds an in-memory blob tx storage, similar to the queue in the
legacypool
- a limited number of received txs can be added to this per account
- txs waiting in the gapped queue are not processed further and not
propagated further until they are unblocked by adding the previos nonce
to the blobpool
The size of the in-memory storage is currently limited per account,
following a slow-start logic.
An overall size limit, and a TTL is also enforced for DoS protection.
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Co-authored-by: MariusVanDerWijden <m.vanderwijden@live.de>
This pull request introduces a mechanism to compress trienode history by
storing only the node diffs between consecutive versions.
- For full nodes, only the modified children are recorded in the history;
- For short nodes, only the modified value is stored;
If the node type has changed, or if the node is newly created or
deleted, the entire node value is stored instead.
To mitigate the overhead of reassembling nodes from diffs during history
reads, checkpoints are introduced by periodically storing full node values.
The current checkpoint interval is set to every 16 mutations, though
this parameter may be made configurable in the future.
Fixes#33369
This omits "topics" and "addresses" from the filter when they are unspecified.
It is required for interoperability with some server implementations that cannot
handle `null` for these fields.
It's a PR based on #33303 and introduces an approach for trienode
history indexing.
---
In the current archive node design, resolving a historical trie node at
a specific block
involves the following steps:
- Look up the corresponding trie node index and locate the first entry
whose state ID
is greater than the target state ID.
- Resolve the trie node from the associated trienode history object.
A naive approach would be to store mutation records for every trie node,
similar to
how flat state mutations are recorded. However, the total number of trie
nodes is
extremely large (approximately 2.4 billion), and the vast majority of
them are rarely
modified. Creating an index entry for each individual trie node would be
very wasteful
in both storage and indexing overhead. To address this, we aggregate
multiple trie
nodes into chunks and index mutations at the chunk level instead.
---
For a storage trie, the trie is vertically partitioned into multiple sub
tries, each spanning
three consecutive levels. The top three levels (1 + 16 + 256 nodes) form
the first chunk,
and every subsequent three-level segment forms another chunk.
```
Original trie structure
Level 0 [ ROOT ] 1 node
Level 1 [0] [1] [2] ... [f] 16 nodes
Level 2 [00] [01] ... [0f] [10] ... [ff] 256 nodes
Level 3 [000] [001] ... [00f] [010] ... [fff] 4096 nodes
Level 4 [0000] ... [000f] [0010] ... [001f] ... [ffff] 65536 nodes
Vertical split into chunks (3 levels per chunk)
Level0 [ ROOT ] 1 chunk
Level3 [000] ... [fff] 4096 chunks
Level6 [000000] ... [fffffff] 16777216 chunks
```
Within each chunk, there are 273 nodes in total, regardless of the
chunk's depth in the trie.
```
Level 0 [ 0 ] 1 node
Level 1 [ 1 ] … [ 16 ] 16 nodes
Level 2 [ 17 ] … … [ 272 ] 256 nodes
```
Each chunk is uniquely identified by the path prefix of the root node of
its corresponding
sub-trie. Within a chunk, nodes are identified by a numeric index
ranging from 0 to 272.
For example, suppose that at block 100, the nodes with paths `[]`,
`[0]`, `[f]`, `[00]`, and `[ff]`
are modified. The mutation record for chunk 0 is then appended with the
following entry:
`[100 → [0, 1, 16, 17, 272]]`, `272` is the numeric ID of path `[ff]`.
Furthermore, due to the structural properties of the Merkle Patricia
Trie, if a child node
is modified, all of its ancestors along the same path must also be
updated. As a result,
in the above example, recording mutations for nodes `00` and `ff` alone
is sufficient,
as this implicitly indicates that their ancestor nodes `[]`, `[0]` and
`[f]` were also
modified at block 100.
---
Query processing is slightly more complicated. Since trie nodes are
indexed at the chunk
level, each individual trie node lookup requires an additional filtering
step to ensure that
a given mutation record actually corresponds to the target trie node.
As mentioned earlier, mutation records store only the numeric
identifiers of leaf nodes,
while ancestor nodes are omitted for storage efficiency. Consequently,
when querying
an ancestor node, additional checks are required to determine whether
the mutation
record implicitly represents a modification to that ancestor.
Moreover, since trie nodes are indexed at the chunk level, some trie
nodes may be
updated frequently, causing their mutation records to dominate the
index. Queries
targeting rarely modified trie nodes would then scan a large amount of
irrelevant
index data, significantly degrading performance.
To address this issue, a bitmap is introduced for each index block and
stored in the
chunk's metadata. Before loading a specific index block, the bitmap is
checked to
determine whether the block contains mutation records relevant to the
target trie node.
If the bitmap indicates that the block does not contain such records,
the block is skipped entirely.
Adds BlobTxType and SetCodeTxType to GasPrice switch case, aligning with
`MaxFeePerGas` and `MaxPriorityFeePerGas` handling.
Co-authored-by: m6xwzzz <maskk.weller@gmail.com>
### Description
Add a new `OnStateUpdate` hook which gets invoked after state is
committed.
### Rationale
For our particular use case, we need to obtain the state size metrics at
every single block when fuly syncing from genesis. With the current
state sizer, whenever the node is stopped, the background process must
be freshly initialized. During this re-initialization, it can skip some
blocks while the node continues executing blocks, causing gaps in the
recorded metrics.
Using this state update hook allows us to customize our own data
persistence logic, and we would never skip blocks upon node restart.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Adds missing trienode freezer case to InspectFreezerTable, making it
consistent with InspectFreezer which already supports it.
Co-authored-by: m6xwzzz <maskk.weller@gmail.com>
Fix#33390
`setHeadBeyondRoot` was failing to invalidate finalized blocks because
it compared against the original head instead of the rewound root. This
fix updates the comparison to use the post-rewind block number,
preventing the node from reporting a finalized block that no longer
exists. Also added relevant test cases for it.
This PR removes the version-check command and its associated logic as
discussed in issue #31222.
Removed versionCheckCommand from misccmd.go and main.go.
Deleted version_check.go and its corresponding tests.
Cleaned up testdata/vcheck directory (~800 lines of JSON/signatures
removed).
Verified build with make geth
HeadSync kept reqFinalityEpoch entries for servers after receiving
EvUnregistered, while other per-server maps were cleared. This left
stale request.Server keys reachable from HeadSync, which can lead to a
slow memory leak in setups that dynamically register and unregister
servers.
The fix adds deletion of the reqFinalityEpoch entry in the
EvUnregistered handler. This aligns HeadSync with the cleanup pattern
used by other sync modules and keeps the finality request bookkeeping
strictly limited to currently registered servers.
This pull request optimizes history indexing by splitting a single large
database
batch into multiple smaller chunks.
Originally, the indexer will resolve a batch of state histories and
commit all
corresponding index entries atomically together with the indexing
marker.
While indexing more state histories in a single batch improves
efficiency, excessively
large batches can cause significant memory issues.
To mitigate this, the pull request splits the mega-batch into several
smaller batches
and flushes them independently during indexing. However, this introduces
a potential
inconsistency that some index entries may be flushed while the indexing
marker is not,
and an unclean shutdown may leave the database in a partially updated
state.
This can corrupt index data.
To address this, head truncation is introduced. After a restart, any
excessive index
entries beyond the expected indexing marker are removed, ensuring the
index remains
consistent after an unclean shutdown.
This is a new step in my crusade against the braindead fad of starting
PR titles with a word that is completely redundant with github labels,
thus wasting prime first-line real-estate for something that isn't
necessary.
I noticed that every single one of these PRs are low-quality AI-slop, so
I think there is a strong case to be made for these PRs to be
auto-closed. A message is added before closing the PR, redirecting to
our contribution guidelines, so I expect quality first-time contributors
to read them and reopen the PR. In the case of spam PRs, the author is
unlikely to revisit a given PR, and so auto-closing might have a
positive impact. That's an experiment worth trying, imo.
In order to reduce the amount of code that is embedded into the keeper
binary, I am removing all the verkle code that uses go-verkle and
go-ipa. This will be followed by further PRs that are more like stubs to
replace code when the keeper build is detected.
I'm keeping the binary tree of course. This means that you will still
see `isVerkle` variables all over the codebase, but they will be renamed
when code is touched (i.e. this is not an invitation for 30+ AI slop
PRs).
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
In this PR, two things have been fixed:
---
(a) truncate the stale beacon headers with latest snap block
Originally, b.filled is used as the indicator for deleting stale beacon headers.
This field is set only after synchronization has been scheduled, under the
assumption that the skeleton chain is already linked to the local chain.
However, the local chain can be mutated via `debug_setHead`, which may
cause `b.filled` outdated. For instance, `b.filled` refers to the last head snap block
in the last sync cycle while after `debug_setHead`, the head snap block has been
rewounded to 1.
As a result, Geth can enter an unintended loop: it repeatedly downloads
the missing beacon headers for the skeleton chain and attempts to schedule the
actual synchronization, but in the final step, all recently fetched headers are removed
by `cleanStales` due to the stale `b.filled` value.
This issue is addressed by always using the latest snap block as the indicator,
without relying on any cached value. However, note that before the skeleton
chain is linked to the local chain, the latest snap block will always be below
skeleton.tail, and this condition should not be treated as an error.
---
(b) merge the subchains once the skeleton chain links to local chain
Once the skeleton chain links with local one, it will try to schedule the
synchronization by fetching the missing blocks and import them then.
It's possible the last subchain already overwrites the previous subchain and
results in having two subchains leftover. As a result, an error log will printed
https://github.com/ethereum/go-ethereum/blob/master/eth/downloader/skeleton.go#L1074
Blobs are stored per transaction in the pool, so we need billy to handle
up to the per-tx limit, not to the per-block limit.
The per-block limit was larger than the per-tx limit, so it not a bug,
we just created and handled a few billy files for no reason.
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
This PR removes the legacy sidecar conversion logic.
After the Osaka fork, the blobpool will accept only blob sidecar version
1.
Any remaining version 0 blob transactions, if they still exist, will no
longer
be eligible for inclusion.
Note that conversion at the RPC layer is still supported, and version 0
blob
transactions will be automatically converted to version 1 there.
When iterating over a map with value types in Go, the loop variable is a
copy. In `markCodeExistence`, assigning to `code.exists` modified only
the local copy, not the actual map entry, causing the existence flag to
always remain false.
This resulted in overcounting contract codes in state size statistics,
as codes that already existed in the database were incorrectly counted
as new.
Fix by changing `codes` from `map[common.Address]contractCode` to
`map[common.Address]*contractCode`, so mutations apply directly to the
struct.
The fuzz test file has been broken for a while - it doesn't compile with
the `gofuzz` build tag.
Two issues:
- Line 59: called `SignifySignFile` which doesn't exist (should be
`SignFile`)
- Line 71: used `:=` instead of `=` for already declared `err` variable
This PR fixes the bug reported in #33365.
The impact of the bug is not catastrophic. After a transaction is
ultimately fetched, validation and propagation will be performed based
on the fetched body, and any response with a mismatched type is treated
as a protocol violation. An attacker could only waste the limited
portion of victim’s bandwidth at most.
However, the reasons for submitting this PR are as follows
1. Fetching a transaction announced with an arbitrary type is a weird
behavior.
2. It aligns with efforts such as EIP-8077 and #33119 to make the
fetcher smarter and reduce bandwidth waste.
Regarding the `FilterType` function, it could potentially be implemented
by modifying the Filter function's parameter itself, but I wasn’t sure
whether changing that function is acceptable, so I left it as is.
The simulator computed active precompiles from the base header, which is
incorrect when simulations cross fork boundaries. This change selects
precompiles using the current simulated header so the precompile set
matches the block’s number/time. It brings simulate in line with doCall,
tracing, and mining, and keeps precompile state overrides applied on the
correct epoch set.
## Description
This PR fixes incorrect contract code state metrics by ensuring
duplicate codes are not counted towards the reported results.
## Rationale
The contract code metrics don't consider database deduplication. The
current implementation assumes that the results are only **slightly
inaccurate**, but this is not true, especially for data collection
efforts that started from the genesis block.
Fixes an issue where HashFolder skipped the root directory upon hitting
the first file in the excludes list. This happened because the walk function
returned SkipDir even for regular files.
This moves the tracking of the current syncmode into the downloader, fixing an
issue where the syncmode being requested through the engine API could go
out-of-sync with the actual mode being performed by downloader.
Fixes#32629
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
The EIP says to increment PC by 2 _instead of_ the standard increment by
1. The opcode handlers added in #33095 result in incrementing PC by 3,
because they ignored the increment already present in `interpreter.go`.
Does this need to be better specified in the EIP? I've added a [new test
case](https://github.com/ethereum/EIPs/pull/10859) for it anyway.
Found by @0xriptide.
XORBytes was added to package crypto/subtle in Go 1.20, and it's faster
than our bitutil.XORBytes. There is only one use of this function
across go-ethereum so we can simply deprecate the custom implementation.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
The random-port retry loop in addAnyPortMapping shadowed the err
variable, causing the function to return (0, nil) when all attempts
failed. This change removes the shadowing and preserves the last error
across both the fixed-port and random-port retries, ensuring failures
are reported to callers correctly.
This PR changes the Pebble configurations as below:
- increase the MemTableStopWritesThreshold for handling temporary spike
- decrease the L0CompactionConcurrency and CompactionDebtConcurrency to
scale up compaction readily
The original condition `deleted && !logPrinted || time.Since(...)` was
incorrectly grouping due to operator precedence, causing logs to print
every 10 seconds even when no deletion was happening (deleted=false).
According to SafeDeleteRange documentation, the 'deleted' parameter is
"true if entries have actually been deleted already". The logging should
only happen when deletion is active.
Fixed by adding parentheses: `deleted && (!logPrinted ||
time.Since(...))`Now logs print only when items are being deleted AND
either it's the first log or 10+ seconds have passed since the last one.
This improves the error code for cases where invalid query parameters
are submitted to `eth_getLogs`. I also improved the error message that
is emitted when querying into the future.
This is to benchmark how much the internal parts of GetBlobsV2 take.
This is not an RPC-level benchmark, so JSON-RPC overhead is not
included.
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
This PR exposes the state size statistics to the metrics, making them
easier to demonstrate.
Note that the contract code included in the metrics is not
de-duplicated, so the reported size
will appear larger than the actual storage footprint.
This introduces two main changes to Pebble's configuration:
(a) Remove the Bloom filter at Level 6
The Bloom filter is never used at the bottom-most level, so keeping it
serves no purpose. Removing it saves storage without affecting read
performance.
(b) Re-enable read-sampling compaction
Read-sampling compaction was previously disabled in the hash-based
scheme because all data was identified by hashes and basically no data
overwrite. Read sampling compaction makes no sense.
After switching to the path-based scheme, data overwrites are much more
common, making read-sampling compaction beneficial and reasonable to re-enable.
This PR introduces a new debug feature, logging the slow blocks with
detailed performance statistics, such as state read, EVM execution and
so on.
Notably, the detailed performance statistics of slow blocks won't be
logged during the sync to not overwhelm users. Specifically, the statistics
are only logged if there is a single block processed.
Example output
```
########## SLOW BLOCK #########
Block: 23537063 (0xa7f878611c2dd27f245fc41107d12ebcf06b4e289f1d6acf44d49a169554ee09) txs: 248, mgasps: 202.99
EVM execution: 63.295ms
Validation: 1.130ms
Account read: 6.634ms(648)
Storage read: 17.391ms(1434)
State hash: 6.722ms
DB commit: 3.260ms
Block write: 1.954ms
Total: 99.094ms
State read cache: account (hit: 622, miss: 26), storage (hit: 1325, miss: 109)
##############################
```
We still default to legacy txes for methods like eth_sendTransaction,
eth_signTransaction. We can default to 0x2 and if someone would like to
stay on legacy they can do so by setting the `gasPrice` field.
cc @deffrian
Recently in #31630 we removed support for overriding the network id in
preset networks. While this feature is niche, it is useful for shadow
forks. This PR proposes we add the functionality back, but in a simpler
way.
Instead of checking whether the flag is set in each branch of the
network switch statement, simply apply the network flag after the switch
statement is complete. This retains the following behavior:
1. Auto network id based on chain id still works, because `IsSet` only
returns true if the flag is _actually_ set. Not if it just has a default
set.
2. The preset networks will set their network id directly and only if
the network id flag is set is it overridden. This, combined with the
override genesis flag is what allows the shadow forks.
3. Setting the network id to the same network id that the preset _would
have_ set causes no issues and simply emits the `WARN` that the flag is
being set explicitly. I don't think people explicitly set the network id
flag often.
```
WARN [10-22|09:36:15.052] Setting network id with flag id=10
```
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This adds checks into getPayload to ensure the correct version is called
for the fork which applies to the payload.
---------
Co-authored-by: jsvisa <delweng@gmail.com>
This was found because other clients are failing RPC tests generated by
Geth. Nethermind and Besu return the correct error code, -32602, in this
situation.
Enable blocktest to read filenames from stdin when no path argument is
provided, matching the existing statetest behavior. This allows
efficient batch processing of blockchain tests.
Usage:
- Single file: evm blocktest <path>
- Batch mode: find tests/ -name "*.json" | evm blocktest
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: MariusVanDerWijden <m.vanderwijden@live.de>
Co-authored-by: Felix Lange <fjl@twurst.com>
No matter what value of P2P.DiscoveryV4 or DiscoveryV5 is set in config file,
it will be overwritten by the CLI flag, even if the flag is not set. This fixes it
to apply the flag only if set.
Fixes error messages to print the actual blob gas value instead of the
pointer address by dereferencing `ExcessBlobGas`, `BlobGasUsed` and
`ParentBeaconRoot`.
Bumps
[github.com/consensys/gnark-crypto](https://github.com/consensys/gnark-crypto)
from 0.18.0 to 0.18.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/consensys/gnark-crypto/releases">github.com/consensys/gnark-crypto's
releases</a>.</em></p>
<blockquote>
<h2>v0.18.1</h2>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/Consensys/gnark-crypto/compare/v0.18.0...v0.18.1">https://github.com/Consensys/gnark-crypto/compare/v0.18.0...v0.18.1</a></p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/Consensys/gnark-crypto/blob/master/CHANGELOG.md">github.com/consensys/gnark-crypto's
changelog</a>.</em></p>
<blockquote>
<h2>[v0.18.1] - 2025-10-28</h2>
<h3>Docs</h3>
<ul>
<li>add CHANGELOG for 0.18.1</li>
</ul>
<h3>Perf</h3>
<ul>
<li>limit memory allocation during Vector deserialization (<a
href="https://redirect.github.com/Consensys/gnark-crypto/issues/759">#759</a>)</li>
</ul>
<p><!-- raw HTML omitted --><!-- raw HTML omitted --></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="fb04e95c3b"><code>fb04e95</code></a>
docs: add CHANGELOG for 0.18.1</li>
<li><a
href="0a4d04ae62"><code>0a4d04a</code></a>
perf: limit memory allocation during Vector deserialization (<a
href="https://redirect.github.com/consensys/gnark-crypto/issues/759">#759</a>)</li>
<li>See full diff in <a
href="https://github.com/consensys/gnark-crypto/compare/v0.18.0...v0.18.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
You can disable automated security fix PRs for this repo from the
[Security Alerts
page](https://github.com/ethereum/go-ethereum/network/alerts).
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
This change fixes a stall in the legacy blob sidecar conversion pipeline
where tasks that arrived during an active batch could remain unprocessed
indefinitely after that batch completed, unless a new external event
arrived.
The root cause was that the loop did not restart processing in
the case <-done: branch even when txTasks had accumulated work, relying
instead on a future event to retrigger the scheduler. This behavior is
inconsistent with the billy task pipeline, which immediately chains to
the next task via runNextBillyTask() without requiring an external trigger.
The fix adds a symmetric restart path in `case <-done`: that checks
`len(txTasks) > 0`, clones the accumulated tasks, clears the queue, and
launches a new run with a fresh done and interrupt.
This preserves batching semantics, prevents indefinite blocking of callers
of convert(), and remains safe during shutdown since the quit path
still interrupts and awaits the active batch. No public interfaces or logging
were changed.
Fixes error messages to print the actual blob gas value instead of the
pointer address by dereferencing `ExcessBlobGas`, `BlobGasUsed` and
`ParentBeaconRoot`.
A new pointless fad appeared recently where people just create a fairly
low information tag at the beginning of their github PR titles.
Something like `feat` or other keywords.
This seems to originate from the angular community and to be used for
automation scripts over there. We do not use any of those scripts and if
we did we would be using the github labels, which offer strictly
equivalent functionalities without wasting useful PR title space.
In order for these keywords to fail the validation, I am adding a check
that these directories listed indeed exist in the repository.
Looks like (in some very EVM specific tests) we spent a lot of time
resizing memory. If the underlying array is big enough, we can speed it
up a bit by simply slicing the memory.
goos: linux
goarch: amd64
pkg: github.com/ethereum/go-ethereum/core/vm
cpu: Intel(R) Core(TM) Ultra 7 155U
│ /tmp/old.txt │ /tmp/new.txt │
│ sec/op │ sec/op vs base │
Resize-14 6.145n ± 9% 1.854n ± 14% -69.83% (p=0.000 n=10)
│ /tmp/old.txt │ /tmp/new.txt │
│ B/op │ B/op vs base │
Resize-14 5.000 ± 0% 5.000 ± 0% ~ (p=1.000 n=10)
│ /tmp/old.txt │ /tmp/new.txt │
│ allocs/op │ allocs/op vs base │
Resize-14 0.000 ± 0% 0.000 ± 0% ~ (p=1.000 n=10) ¹
From the blocktest benchmark:
620ms 10.93s (flat, cum) 9.92% of Total
. . 80:func (m *Memory) Resize(size uint64) {
30ms 60ms 81: if uint64(m.Len()) < size {
590ms 10.87s 82: m.store = append(m.store, make([]byte, size-uint64(m.Len()))...)
. . 83: }
. . 84:}
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
EIP-8024: Backward compatible SWAPN, DUPN, EXCHANGE
Introduces additional instructions for manipulating the stack which
allow accessing the stack at higher depths. This is an initial implementation
of the EIP, which is still in Review stage.
Adds a flag to specify how many blobs a node is willing to include in
their locally build block as specified in
https://eips.ethereum.org/EIPS/eip-7872
I deviated from the EIP in one case, I allowed for specifying 0 as the
minimum blobs/block
The list iterator previously returned true on parse errors without
advancing the input, which could lead to non-advancing infinite loops
for callers that do not check Err() inside the loop; to make iteration
safe while preserving error visibility, Next() now marks the iterator as
finished when readKind fails, returning true for the error step so
existing users that check Err() can handle it, and then false on
subsequent calls, and the function comment was updated to document this
behavior and the need to check Err().
This PR adds the "FULU" beacon chain config entries for all networks and
fixes the select statements that choose the appropriate engine API call
versions (no new version there but the "default" was always the first
version; now it's the latest version so no need to change unless there
is actually a new version).
New beacon checkpoints are also added for mainnet, sepolia and hoodi
(not for holesky because it's not finalizing at the moment).
Note that though unrelated to fusaka, the log indexer checkpoints are
also updated for mainnet (not for the other testnets, mainly because I
only have mainnet synced here on my travel SSD; this should be fine
though because the index is also reverse generated for a year by default
so it does not really affect the indexing time)
Links for the new checkpoints:
https://beaconcha.in/slot/13108192https://light-sepolia.beaconcha.in/slot/9032384https://hoodi.beaconcha.in/slot/1825728
This change introduces an iterator for the history index in the pathdb.
It provides sequential access to historical entries, enabling efficient
scanning and future features built on top of historical state traversal.
Fix#33212.
This PR remove `github.com/olekukonko/tablewriter` from dependencies and
use a naive stub implementation.
`github.com/olekukonko/tablewriter` is used to format database inspection
output neatly. However, it requires custom adjustments for TinyGo and is
incompatible with the latest version.
---------
Co-authored-by: MariusVanDerWijden <m.vanderwijden@live.de>
This is broken off of #31730 to only focus on testing networks that
start with verkle at genesis.
The PR has seen a lot of work since its creation, and it now targets
creating and re-executing tests for a binary tree testnet without the
transition (so it starts at genesis). The transition tree has been moved
to its own package. It also replaces verkle with the binary tree for
this specific application.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
The iterator loop in findTxInBlockBody returned the outer-scoped err
when iter.Err() was non-nil, which could incorrectly propagate a nil or
stale error and hide actual RLP decoding issues. This patch returns
iter.Err() as intended by the rlp list iterator API, matching
established patterns elsewhere in the codebase and improving diagnostics
when encountering malformed transaction entries.
While updating to latest Geth, I noticed `OnCodeChangeV2` was not
properly handled in `SelfDestruct/6780`, this PR fixes this and bring a
unit test. Let me know if it's deemed more approriate to merge the tests
with the other one.
[powdr](github.com/powdr-labs/powdr) has tested keeper in their womir
system and managed to get it to work. This PR adds wasm as a keeper
target. There's another plan by the zkevm team to support wasm with wasi
as well, so these PR adds both targets.
These currently uses the `example` tag, as there is no precompile
intefrace defined for either target yet. Nonetheless, this is useful for
testing these zkvms so it makes sense to support these experimental
targets already.
The periodic sealing loop failed to reset its timer when sealBlock
returned an error, causing the timer to never fire again and effectively
halting block production in developer periodic mode after the first
failure. This is a bug because the loop relies on the timer to trigger
subsequent sealing attempts, and transient errors (e.g., pool races or
chain rewinds) should not permanently stop the loop. The change moves
timer.Reset after the sealing attempt unconditionally, ensuring the loop
continues ticking and retrying even when sealing fails, which matches
how other periodic timers in the codebase behave and preserves forward
progress.
The version check incorrectly used `&&` instead of `||`, causing
versions like v1.0.x through v1.4.x to be allowed when they should be
rejected. These versions don't support EIP-712 signing which was
introduced in firmware v1.5.0.
Because the map iteration is unstable, we need to order logs by tx index
and keep the same order with receipts and their logs, so we can still
get the same `LogsHash` across runs.
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
This pull request updates `PrettyAge.String` so that the age formatter
now treats exact unit boundaries (like a full day or week) as that unit
instead of spilling into smaller components, keeping duration output
aligned with human expectations.
This adds two new CI targets. One is for building all supported keeper
executables, the other is for running unit tests on 32-bit Linux.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
## Description
- Summary: Correct the JS timer callback argument forwarding to match
standard JS semantics.
- What changed: In `internal/jsre/jsre.go`, the callback is now invoked
with only the arguments after the callback and delay.
- Why: Previously, the callback received the function and delay as
parameters, causing unexpected behavior and logic bugs for consumers.
Equal is called every time the transaction sender is accessed,
even when the sender is cached, so it is worth optimizing.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
In this PR, several changes have been made:
(a) restructure the trienode history header section
Previously, the offsets of the key and value sections were recorded before
encoding data into these sections. As a result, these offsets referred to the
start position of each chunk rather than the end position.
This caused an issue where the end position of the last chunk was
unknown, making it incompatible with the freezer partial-read APIs.
With this update, all offsets now refer to the end position, and the
start position of the first chunk is always 0.
(b) Enable partial freezer read for trienode data retrieval
The partial freezer read feature is now utilized in trienode data
retrieval, improving efficiency.
At the time keeper support was added into ci.go, we were using a go.work
file to make ./cmd/keeper accessible from within the main go-ethereum
module. The workspace file has since been removed, so we need to build
keeper from within its own module instead.
Found in
https://github.com/ethereum/go-ethereum/actions/runs/17803828253/job/50611300621?pr=32585
```
--- FAIL: TestClientCancelWebsocket (0.33s)
panic: read tcp 127.0.0.1:36048->127.0.0.1:38643: read: connection reset by peer [recovered, repanicked]
goroutine 15 [running]:
testing.tRunner.func1.2({0x98dd20, 0xc0005b0100})
/opt/actions-runner/_work/_tool/go/1.25.1/x64/src/testing/testing.go:1872 +0x237
testing.tRunner.func1()
/opt/actions-runner/_work/_tool/go/1.25.1/x64/src/testing/testing.go:1875 +0x35b
panic({0x98dd20?, 0xc0005b0100?})
/opt/actions-runner/_work/_tool/go/1.25.1/x64/src/runtime/panic.go:783 +0x132
github.com/ethereum/go-ethereum/rpc.httpTestClient(0xc0001dc1c0?, {0x9d5e40, 0x2}, 0xc0002bc1c0)
/opt/actions-runner/_work/go-ethereum/go-ethereum/rpc/client_test.go:932 +0x2b1
github.com/ethereum/go-ethereum/rpc.testClientCancel({0x9d5e40, 0x2}, 0xc0001dc1c0)
/opt/actions-runner/_work/go-ethereum/go-ethereum/rpc/client_test.go:356 +0x15f
github.com/ethereum/go-ethereum/rpc.TestClientCancelWebsocket(0xc0001dc1c0?)
/opt/actions-runner/_work/go-ethereum/go-ethereum/rpc/client_test.go:319 +0x25
testing.tRunner(0xc0001dc1c0, 0xa07370)
/opt/actions-runner/_work/_tool/go/1.25.1/x64/src/testing/testing.go:1934 +0xea
created by testing.(*T).Run in goroutine 1
/opt/actions-runner/_work/_tool/go/1.25.1/x64/src/testing/testing.go:1997 +0x465
FAIL github.com/ethereum/go-ethereum/rpc 0.371s
```
In `testClientCancel` we wrap the server listener in `flakeyListener`,
which schedules an unconditional close of every accepted connection
after a random delay, if the random delay is zero then the timer fires
immediately, and then the http client paniced of connection reset by
peer.
Here we add a minimum 10ms to ensure the timeout won't fire immediately.
Signed-off-by: jsvisa <delweng@gmail.com>
This PR is an alternative to #32556.
Instead of trying to be smart and reuse `geth init`, we can introduce a
new flag `--genesis` that loads the `genesis.json` from file into the
`Genesis` object in the same path that the other network flags currently
work in.
Question: is something like `--genesis` enough to start deprecating
`geth init`?
--
```console
$ geth --datadir data --hoodi
..
INFO [10-06|22:37:11.202] - BPO2: @1762955544
..
$ geth --datadir data --genesis genesis.json
..
INFO [10-06|22:37:27.988] - BPO2: @1862955544
..
```
Pull the genesis [from the
specs](https://raw.githubusercontent.com/eth-clients/hoodi/refs/heads/main/metadata/genesis.json)
and modify one of the BPO timestamps to simulate a shadow fork.
---------
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
In this PR, the database batch for writing the history index data is
pre-allocated.
It's observed that database batch repeatedly grows the size of the
mega-batch,
causing significant memory allocation pressure. This approach can
effectively
mitigate the overhead.
This PR prevents the SetCode hook from being called when the contract
code
remains unchanged.
This situation can occur in the following cases:
- The deployed runtime code has zero length
- An EIP-7702 authorization attempt tries to unset a non-delegated
account
- An EIP-7702 authorization attempt tries to delegate to the same
account
Previously, the journal writer is nil until the first time rejournal
(default 1h), which means during this period, txs submitted to this node
are not written into journal file (transactions.rlp). If this node is
shutdown before the first time rejournal, then txs in pending or queue
will get lost.
Here, this PR initializes the journal writer soon after launch to solve
this issue.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Uses the go module's `replace` directive to delegate keccak computation
to precompiles.
This is still in draft because it needs more testing. Also, it relies on
a PR that I created, that hasn't been merged yet.
_Note that this PR doesn't implement the stateful keccak state
structure, and it reverts to the current behavior. This is a bit silly
since this is what is used in the tree root computation. The runtime
doesn't currently export the sponge. I will see if I can fix that in a
further PR, but it is going to take more time. In the meantime, this is
a useful first step_
This PR removes dangling peers in `alternates` map
In the current code, a dropped peer is removed from alternates for only
the specific transaction hash it was requesting. If that peer is listed
as an alternate for other transaction hashes, those entries still stick
around in alternates/announced even though that peer already got
dropped.
This PR introduces two new metrics to monitor slow peers
- One tracks the number of slow peers.
- The other measures the time it takes for those peers to become
"unfrozen"
These metrics help with monitoring and evaluating the need for future
optimization of the transaction fetcher and peer management, for example i
n peer scoring and prioritization.
Additionally, this PR moves the fetcher metrics into a separate file,
`eth/fetcher/metrics.go`.
This change addresses critical issues in the state object duplication
process specific to Verkle trie implementations. Without these
modifications, updates to state objects fail to propagate correctly
through the trie structure after a statedb copy operation, leading to
inaccuracies in the computation of the state root hash.
---------
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
New RPC method eth_sendRawTransactionSync(rawTx, timeoutMs?) that
submits a signed tx and blocks until a receipt is available or a timeout
elapses.
Two CLI flags to tune server-side limits:
--rpc.txsync.defaulttimeout (default wait window)
--rpc.txsync.maxtimeout (upper bound; requests are clamped)
closes https://github.com/ethereum/go-ethereum/issues/32094
---------
Co-authored-by: aodhgan <gawnieg@gmail.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Adds ethclient support for the eth_simulateV1 RPC method, which allows
simulating transactions on top of a base state without making changes to
the blockchain.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Fix logging in the verkle dump path to report the actual key being
processed.
Previously, the loop always logged keylist[0], which misled users when
expanding multiple keys and made debugging harder. This change aligns
the
log with the key passed to root.Get, improving traceability and
diagnostics.
This fixes a regression introduced in #32518. In that PR, we removed the
slowdown logic that would throttle lookups when the table runs empty.
Said logic was originally added in #20389.
Usually it's fine, but there exist pathological cases, such as hive
tests, where the node can only discover one other node, so it can only
ever query that node and won't get any results. In cases like these, we
need to throttle the creation of lookups to avoid crazy CPU usage.
Drop peer if sending the same transaction multiple times in a single message.
Fixes https://github.com/ethereum/go-ethereum/issues/32724
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Csaba Kiraly <csaba.kiraly@gmail.com>
This adds a temporary conversion path for blob transactions with legacy
proof sidecar. This feature will activate after Fusaka. We will phase
this out when the fork has sufficiently settled and client side
libraries have been upgraded to send the new proofs.
This pr addresses a few issues brought by the #32270
- Add updates to pricedList after dropping transactions.
- Remove redundant deletions in queue.evictList, since
pool.removeTx(hash, true, true) already performs the removal.
- Prevent duplicate addresses during promotion when Reset is not nil.
The limit check for `MaxUint32` is done after the cast to `int`. On 64
bits machines, that will work without a problem. On 32 bits machines,
that will always fail. The compiler catches it and refuses to build.
Note that this only fixes the compiler build. ~~If the limit is above
`MaxInt32` but strictly below `MaxUint32` then this will fail at runtime
and we have another issue.~~ I checked and this should not happen during
regular execution, although it might happen in tests.
This PR adds a `filterfuzz` subcommand to the workload tester that
generates requests similarly to `filtergen` (though with a much smaller
block length limit) and also verifies the results by retrieving all
block receipts in the range and locally filtering out relevant results.
Unlike `filtergen` that operates on the finalized chain range only,
`filterfuzz` does check the head region, actually it seeds a new query
at every new chain head.
This PR move the queue out of the main transaction pool.
For now there should be no functional changes.
I see this as a first step to refactor the legacypool and make the queue
a fully separate concept from the main pending pool.
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Co-authored-by: Csaba Kiraly <csaba.kiraly@gmail.com>
This PR implements the partial read functionalities in the freezer, optimizing
the state history reader by resolving less data from freezer.
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
invalidTxMeter was counting txs, while validTxMeter was counting
accounts. Better make the two comparable.
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
- Introduce a new subscription kind `transactionReceipts` to allow clients to
receive transaction receipts over WebSocket as soon as they are available.
- Accept optional `transactionHashes` filter to subscribe to receipts for specific
transactions; an empty or omitted filter subscribes to all receipts.
- Preserve the same receipt format as returned by `eth_getTransactionReceipt`.
- Avoid additional HTTP polling, reducing RPC load and latency.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Fixes issue #32793. When the pending tx subscription ends, the filter
is removed from `api.filters`, but it is not terminated. There is no other
way to terminate it, so the subscription will leak, and potentially block
the producer side.
In both `TestSimultaneousRequests` and `TestSameRequestID`, we send two
concurrent requests. The client under test is free to respond in either
order, so we need to handle responses both ways.
Also fixes an issue where some generated blob transactions didn't have
any blobs.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR does a few things:
- Sets the gh actions runner sizes for lint (s) and test (l) workflows
- Runs the tests on gh actions in parallel
- Skips fetching the spec tests when unnecessary (on windows in
appveyor)
- Removes ubuntu appveyor runner since it's essentially duplicate of the
gh action workflow now
The gh test seems to go down from ~35min to ~13min.
This pr implements https://github.com/ethereum/go-ethereum/issues/32733
to make StateProcessor more customisable.
## Compatibility notes
This introduces a breaking change to users using geth EVM as a library.
The `NewStateProcessor` function now takes one parameter which has the
chainConfig embedded instead of 2 parameters.
Description:
We found a occasionally node hang issue on BSC, I think Geth may
also have the issue, so pick the fix patch here.
The fix on BSC repo: https://github.com/bnb-chain/bsc/pull/3347
When the hang occurs, there are two routines stuck.
- routine 1: AsyncFilter(...)
On node start, it will run part of the DiscoveryV4 protocol, which could
take considerable time, here is its hang callstack:
```
goroutine 9711 [chan receive]: // this routine was stuck on read channel: `<-f.slots`
github.com/ethereum/go-ethereum/p2p/enode.AsyncFilter.func1()
github.com/ethereum/go-ethereum/p2p/enode/iter.go:206 +0x125
created by github.com/ethereum/go-ethereum/p2p/enode.AsyncFilter in goroutine 1
github.com/ethereum/go-ethereum/p2p/enode/iter.go:192 +0x205
```
- Routine 2: Node Stop
It is the main routine to shutdown the process, but it got stuck when it
tries to shutdown the discovery components, as it tries to drain the
channel of `<-f.slots`, but the extra 1 slot will never have chance to
be resumed.
```
goroutine 11796 [chan receive]:
github.com/ethereum/go-ethereum/p2p/enode.(*asyncFilterIter).Close.func1()
github.com/ethereum/go-ethereum/p2p/enode/iter.go:248 +0x5c
sync.(*Once).doSlow(0xc032a97cb8?, 0xc032a97d18?)
sync/once.go:78 +0xab
sync.(*Once).Do(...)
sync/once.go:69
github.com/ethereum/go-ethereum/p2p/enode.(*asyncFilterIter).Close(0xc092ff8d00?)
github.com/ethereum/go-ethereum/p2p/enode/iter.go:244 +0x36
github.com/ethereum/go-ethereum/p2p/enode.(*bufferIter).Close.func1()
github.com/ethereum/go-ethereum/p2p/enode/iter.go:299 +0x24
sync.(*Once).doSlow(0x11a175f?, 0x2bfe63e?)
sync/once.go:78 +0xab
sync.(*Once).Do(...)
sync/once.go:69
github.com/ethereum/go-ethereum/p2p/enode.(*bufferIter).Close(0x30?)
github.com/ethereum/go-ethereum/p2p/enode/iter.go:298 +0x36
github.com/ethereum/go-ethereum/p2p/enode.(*FairMix).Close(0xc0004bfea0)
github.com/ethereum/go-ethereum/p2p/enode/iter.go:379 +0xb7
github.com/ethereum/go-ethereum/eth.(*Ethereum).Stop(0xc000997b00)
github.com/ethereum/go-ethereum/eth/backend.go:960 +0x4a
github.com/ethereum/go-ethereum/node.(*Node).stopServices(0xc0001362a0, {0xc012e16330, 0x1, 0xc000111410?})
github.com/ethereum/go-ethereum/node/node.go:333 +0xb3
github.com/ethereum/go-ethereum/node.(*Node).Close(0xc0001362a0)
github.com/ethereum/go-ethereum/node/node.go:263 +0x167
created by github.com/ethereum/go-ethereum/cmd/utils.StartNode.func1.1 in goroutine 9729
github.com/ethereum/go-ethereum/cmd/utils/cmd.go:101 +0x78
```
The rootcause of the hang is caused by the extra 1 slot, which was
designed to make sure the routines in `AsyncFilter(...)` can be
finished. This PR fixes it by making sure the extra 1 shot can always be
resumed when node shutdown.
This PR updates the `payloadVersion` function in `simulated_beacon.go`
to handle additional following forks used during development and testing
phases after Osaka.
This change ensures that the simulated beacon correctly resolves the
payload version for these forks, enabling consistent and valid execution
payload handling during local testing or simulation.
The TxPool.signer field was never read and each subpool (legacy/blob)
maintains its own signer instance. This field remained after txpool
refactoring into subpools and is dead code. Removing it reduces
confusion and simplifies the constructor.
- Replace outdated NewFreezer doc that referenced map[string]bool/snappy
toggle with accurate description of -map[string]freezerTableConfig
(noSnappy, prunable).
- Fix misleading field comment on freezerTable.config that spoke as if
it were a boolean (“if true”), clarifying it’s a struct and noting
compression is non-retroactive.
These functions were previously ignoring the error returned by both
`statedb.Commit()` and the subsequent `state.New()`,
which could silently fail and cause panics later when the `statedb` is
used.
This change adds proper error checking and panics with a descriptive
error
message if state creation fails.
While unlikely in normal operation, this can occur if there are database
corruption issues or if invalid root hashes are provided, making
debugging
significantly easier when such issues do occur.
This issue was encountered and fixed in
https://github.com/gballet/go-ethereum/pull/552
where the error handling proved essential for debugging
cc: @gballet as this was discussed in a call already.
Introduces a new tracer which returns the preimages
of evm KECCAK256 hashes.
See #32570.
---------
Co-authored-by: Sina M <1591639+s1na@users.noreply.github.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Bail out of decodeHash when the raw hex string is longer than 32 byte before actually decoding.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
This is a small improvement on #32656 in case Add was called with
multiple type 3 transactions, adding transactions to the pool one-by-one
as they are converted.
Announcement to peers is still done in a batch.
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Fixes race in WaitDeploy test where the backend is closed before goroutine using it wraps up.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Replace time.After with a long‑lived time.Ticker in KeyStore.updater, preventing per‑iteration timer allocations and potential timer buildup.
Co-authored-by: lightclient <lightclient@protonmail.com>
- Correct the error message in TestOneElementProof to expect 'v' instead
of 'k'.
- The trie is updated with key "k" and value "v"; on mismatch the
expected value must be 'v'.
- Aligns the message with the actual test logic and other similar checks
in this file, reducing confusion during test failures. No behavioral
changes.
This implements the conversion of existing blob transactions to the new proof
version. Conversion is triggered at the Osaka fork boundary. The conversion is
designed to be idempotent, and may be triggered multiple times in case of a reorg
around the fork boundary.
This change is the last missing piece that completes our strategy for the blobpool
conversion. After the Osaka fork,
- new transactions will be converted on-the-fly upon entry to the pool
- reorged transactions will be converted while being reinjected
- (this change) existing transactions will be converted in the background
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: lightclient <lightclient@protonmail.com>
This fixes `go run build/ci.go install`. It was failing because we
resolved all main packages by parsing sources, which fails when the
source directory contains multiple modules.
The parent header was missing the BaseFee field when calculating the
reserve price for EIP-7918 in the Osaka fork, causing a nil pointer
dereference. This fix ensures BaseFee is properly set from ParentBaseFee
in the environment.
Added regression test case 34 to verify Osaka fork blob gas calculation
works correctly with parent base fee.
This change replaces wrapping a stale outer err with the iterator’s own
error after Next(), and switches the post-BlockAndReceipts() check to
use the returned err. According to internal/era iterator contract,
Error() should be consulted immediately after Next() to surface
iteration errors, while decoding errors from Block/Receipts are returned
directly. The previous code could hide the real failure (using nil or
unrelated err), leading to misleading diagnostics and missed iteration
errors.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
https://go.dev/ref/mod#go-work-file advises against checking `go.work`
files because they can interfere with local development. We added the
workspace file in order to make `go test` and other tools work across
multiple modules. But it seems to cause weird issues with the
`go.work.sum` file being modified, etc.
So with this PR, we instead run all the `ci.go` commands for all modules
in the workspace manually.
This pull request introduces a queue for legacy sidecar conversion to
handle transactions that persist after the Osaka fork. Simply dropping
these transactions would significantly harm the user experience.
To balance usability with system complexity, we have introduced a
conversion time window of two hours post Osaka fork. During this period,
the system will accept legacy blob transactions and convert them in a
background process.
After the window, all legacy transactions will be rejected. Notably, all
the blob transactions will be validated statically before the conversion,
and also all conversion are performed in a single thread, minimize the risk
of being DoS.
We believe this two hour window provides sufficient time to process
in-flight legacy transactions and allows submitters to migrate to the
new format.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Fix the t.Fatalf format arguments in TestBadBlockStorage to match the
intended #index output. Previously, the left number used i+1 and the
right index used the block number, producing misleading diagnostics.
Correct mapping improves test failure clarity and debuggability.
Remove redundant duplicate test vectors. The two entries were identical
and back-to-back, providing no additional coverage while adding noise.
Keeping a single instance maintains test intent and clarity without
altering behavior.
Fix typo in test error message where "MustParseBig" was incorrectly
used instead of "MustParseUint64" in the TestMustParseUint64Panic
function.
The test still functions correctly, but now the error message
accurately reflects the function being tested.
before:
go test -run=^$ -bench=. ./crypto/... 94.83s user 2.68s system 138% cpu
1:10.55 tota
after:
go test -run=^$ -bench=. ./crypto/... 75.43s user 2.58s system 123% cpu
1:03.01 total
before:
go test -run=^$ -bench=. ./core/types 47.80s user 2.18s system 102% cpu
48.936 tota
after:
go test -run=^$ -bench=. ./core/types 42.42s user 2.27s system 112% cpu
39.593 total
before:
go test -run=^$ -bench=. ./core/vm/... -timeout=1h 1841.87s user 40.96s
system 124% cpu 25:15.76 total
after:
go test -run=^$ -bench=. ./core/vm/... -timeout=1h 1588.65s user 33.79s
system 123% cpu 21:53.25 total
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
before:
go test -run=^$ -bench=. ./log -timeout=1h 12.19s user 2.19s system 89%
cpu 16.025 total
after:
go test -run=^$ -bench=. ./log -timeout=1h 10.64s user 1.53s system 89%
cpu 13.607 total
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
before:
go test -run=^$ -bench=. ./eth/... 827.57s user 23.80s system 361% cpu
3:55.49 total
after:
go test -run=^$ -bench=. ./eth/... 281.62s user 13.62s system 245% cpu
2:00.49 total
before:
go test -run=^$ -bench=. ./core/state/... 120.85s user 7.96s system 129%
cpu 1:39.13 tota
after:
go test -run=^$ -bench=. ./core/state/... 21.32s user 2.12s system 97%
cpu 24.006 total
This PR improves `TestBlockSync` so that it also tests the finality
update validation.
Note: to this date four long and complex (at least partly AI generated)
PRs arrived that did something related to testing finality but honestly
we do not need a bloated "comprehensive" test to test a trivial feature
because maintaining these tests can also be a pain over the long term.
This PR adds some sufficient sanity checks to detect if finality ever
gets broken by a future change.
This disables the tx gaslimit cap for eth_call and related RPC operations.
I don't like how this fix works. Ideally we'd be checking the tx
gaslimit somewhere else, like in the block validator, or any other place
that considers block transactions. Doing the check in StateTransition
means it affects all possible ways of executing a message.
The challenge is finding a place for this check that also triggers
correctly in tests where it is wanted. So for now, we are just combining
this with the EOA sender check for transactions. Both are disabled for
call-type messages.
Fixes a crash when loading the beacon chain config if new fields like
`BLOB_SCHEDULE: []` are present.
Previously, the config loader assumed all values were strings, causing
errors such as:
```
Fatal: Could not load beacon chain config '/network-configs/config.yaml': failed to parse beacon chain config file: yaml: unmarshal errors:
line 242: cannot unmarshal !!seq into string
```
This PR updates the parsing logic to handle non-string values correctly
and adds explicit validation for fork fields.
Add cli configurable limit for the number of addresses allowed in
eth_getLogs filter criteria:
https://github.com/ethereum/go-ethereum/issues/32264
Key changes:
- Added --rpc.getlogmaxaddrs CLI flag (default: 1000) to configure the
maximum number of addresses
- Updated ethconfig.Config with FilterMaxAddresses field for
configuration management
- Modified filter system to use the configurable limit instead of the
hardcoded maxAddresses constant
- Enhanced test coverage with new test cases for address limit
validation
- Removed hardcoded validation from JSON unmarshaling, moving it to
runtime validation
Please notice that I remove the check at FilterCriteria UnmarshalJSON
because the runtime config can not pass into this validation.
Please help review this change!
---------
Co-authored-by: zsfelfoldi <zsfelfoldi@gmail.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Addresses https://github.com/ethereum/go-ethereum/issues/32630
This pull request enables the stateless engine APIs for Osaka and the
following BPOs. Apart from that, a few more descriptions have been added
in the engine APIs, making it easier to follow the spec change.
https://github.com/ethereum/execution-spec-tests/releases/tag/v5.0.0
As of this release, execution-spec-tests also contains all state tests
that were previously in ethereum/tests. We can probably remove the tests
submodule now. However, this would mean we are missing the pre-cancun
tests. Still need to figure out how to resolve this.
---------
Co-authored-by: MariusVanDerWijden <m.vanderwijden@live.de>
When I implemented in #31340 I didn't expect multiple forks to be
configured at once, but this is exactly how BPOs are defined. This
updates the method to determine the next scheduled fork rather than the
last fork.
ZKVMs are constrained environments that liberally allocate memory and
never release it. In this context, using the GC is only going to cause
issues down the road, and slow things down in any case.
- Adds `NodeIteratorWithPrefix()` method to support iterating only nodes
within a specific key prefix
- Adds `NodeIteratorWithRange()` method to support iterating only nodes
within a specific key range
Current `NodeIterator` always traverses the entire remaining trie from a
start position. For non-ethereum applications using the trie implementation,
there's no way to limit iteration to just a subtree with a specific prefix.
**Usage:**
```go
// Only iterate nodes with prefix "key1"
iter, err := trie.NodeIteratorWithPrefix([]byte("key1"))
```
Testing: Comprehensive test suite covering edge cases and boundary conditions.
Closes#32484
---------
Co-authored-by: gballet <guillaume.ballet@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This pull request is based on #32306 , is the second part for shipping
trienode history.
Specifically, this pull request generalize the existing index mechanism,
making is usable
by both state history and trienode history in the near future.
The format that is currently reported by the chain isn't very useful, as
it gives an average for ALL the nodes, and not only the leaves, which
skews the results.
Also, until now there was no way to activate the reporting of errors.
We also decided that metrics weren't the right tool to report this data,
so we decided to dump it to the console if the flag is enabled. A better
system should be built, but for now, printing to the logs does the job.
This improves the latency of lookups in small networks and test setups. When the local node table runs empty, the lookupIterator will trigger refresh to try and fill the table again.
The behaviour of lookup in case of an empty table is changed:
- Previously, lookup waited fixed 1 second before trying to continue the lookup
- Now, lookup on an empty table returns immediately, and a better wait implementation is part of the LookupIterator. It reinitialises the table, and continues the interator as soon as a node becomes available.
This PR adds a new RPC call, which re-executes a block with stateless
mode activated, so that the witness data are collected and returned.
They are `debug_executionWitnessByHash` which takes in a block hash
and `debug_executionWitness` which takes in a block number.
---------
Signed-off-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
ApplyTransaction calls the hooks and builds the receipt, so some
duplicated code can be removed from t8ntool. Test cases have been
changed to add the `blockNumber` and `blockHash` in receipts, since
they were previously not filled in.
Keeper is a zmvm guest program that runs the block transition.
It relies on the zkvm maker implementing `getInput`. For now, we only
provide a single implementation for the 'ziren' VM.
Why keeper?
In the _Mass Effect_ lore, the keepers are animals (?) who maintain the
citadel. Nothing is known from them, and attempts at tampering with them
have failed, as they self-destruct upon inquiry. They have a secret,
nefarious purpose that is only revealed later in the game series, don't
want any spoilers so I didn't dig deeper. All in all, a good metaphor
for zkvms.
---------
Co-authored-by: weilzkm <140377101+weilzkm@users.noreply.github.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
Implements a migration path for the blobpool slotter
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This change ensures TransitionState.Copy preserves BaseRoot. During a
Verkle transition, ts.BaseRoot is required to construct the overlay MPT
when ts.InTransition() is true. Previously, copies dropped BaseRoot,
risking an invalid zero-hash base trie and inconsistent behavior.
Fixes an issue I accidentally introduced in #32579. Essentially, because
we gate the engine methods based on particular forks and I did not add
the BPOs as allowed forks to the method.
Ensure Database.namespace is initialized in pebble.New(...). Without
this, the write-stall metrics registered in onWriteStallBegin/End are
emitted without the intended namespace prefix, while other Pebble
metrics use the provided constructor parameter. This aligns stall
metrics with the rest of the Pebble metric set and fixes inconsistent
metric naming.
---------
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
The lookup would add self into the replyBuffer if returned by another node.
Avoid doing that by marking self as seen.
With the changed initialization behavior of lookup, the lookupIterator needs to yield the
buffer right after creation. This fixes the smallNetConvergence test, where all results
are straight out of the local table.
Refresh is doing some lookups and thus it could block for some time. We
do not want the initializer of an iterator to block. If there is
something blocking, it should happen when calling Next.
Here, next will start a lookup, which will wait if needed (no nodes),
making sure the iterator's Next is not creating a busy loop.
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
This PR removes the conversion of legacy sidecars after Osaka and instead rejects them to the pool.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
This pull request addresses the corrupted path database with log
indicating:
`history head truncation out of range, tail: 122557, head: 212208,
target: 212557`
This is a rare edge case where the in-memory layers, including the write
buffer
in the disk layer, are fully persisted (e.g., written to file), but the
state history
freezer is not properly closed (e.g., Geth is terminated after
journaling but
before freezer.Close). In this situation, the recent state history
writes will be
truncated on the next startup, while the in-memory layers resolve
correctly.
As a result, the state history falls behind the disk layer (including
the write buffer).
In this pull request, the state history freezer is always synced before
journal,
ensuring the state history writes are always persisted before the
others.
Edit:
It's confirmed that devops team has 10s container termination setting.
It
explains why Geth didn't finish the entire termination without state
history
being closed.
https://github.com/ethpandaops/fusaka-devnets/pull/63/files
TestBlobTxWithoutSidecar test could run infinitely in case of a client
not requesting the good transaction. This adds a timeout to make the
test fail in this case.
Fixes https://github.com/ethereum/go-ethereum/issues/32422
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Add state size tracking and retrieve api, start geth with `--state.size-tracking`,
the initial bootstrap is required (around 1h on mainnet), after the bootstrap,
use `debug_stateSize()` RPC to retrieve the state size:
```
> debug.stateSize()
{
accountBytes: "0x39681967b",
accountTrienodeBytes: "0xc57939f0c",
accountTrienodes: "0x198b36ac",
accounts: "0x129da14a",
blockNumber: "0x1635e90",
contractCodeBytes: "0x2b63ef481",
contractCodes: "0x1c7b45",
stateRoot: "0x9c36a3ec3745d72eea8700bd27b90dcaa66de0494b187c5600750044151e620a",
storageBytes: "0x18a6e7d3f1",
storageTrienodeBytes: "0x2e7f53fae6",
storageTrienodes: "0x6e49a234",
storages: "0x517859c5"
}
```
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
As in #32060 we introduced the file based journal path, for the other
sub command(eg: snapshot, db), we should also pass the directory to the
triedb, else the subcommand(eg: `geth snapshot`) failed to run:
```bash
geth snapshot verify-state --datadir /geth-data
...
INFO [09-02|02:12:29.493] Allocated cache and file handles database=/geth-data/geth/chaindata cache=512.00MiB handles=524,288
INFO [09-02|02:12:32.746] Opened ancient database database=/geth-data/geth/chaindata/ancient/chain readonly=true
INFO [09-02|02:12:32.746] Opened Era store datadir=/geth-data/geth/chaindata/ancient/chain/era
INFO [09-02|02:12:32.758] State scheme set to already existing scheme=path
INFO [09-02|02:12:32.760] Load database journal from disk
INFO [09-02|02:12:32.764] Failed to load journal, discard it err="journal not found"
INFO [09-02|02:12:32.789] Opened ancient database database=/geth-data/geth/chaindata/ancient/state readonly=true
INFO [09-02|02:12:32.790] Initialized path database readonly=true triecache=0.00B statecache=0.00B buffer=0.00B history="entire chain"
ERROR[09-02|02:12:32.791] Failed to verify state root=c5458d..4cc785 err="unknown layer: c5458d476da0136a67ef24a93b909aa5c29efa5c5b885dbd1fbaed4e784cc785"
```
This PR is the first step in the trienode history series.
It introduces the `nodeWithOrigin` struct in the path database, which tracks
the original values of dirty nodes to support trienode history construction.
Note, the original value is always empty in this PR, so it won't break the
existing journal for encoding and decoding. The compatibility of journal
should be handled in the following PR.
Another getBlobs PR on top of
https://github.com/ethereum/go-ethereum/pull/32190 to avoid some minor
regressions.
- bring back more log messages from before
- continue processing also on some internal errors
- ensure v2 complies with spec even if there are internal errors
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
This pull request fixes a regression, introduced in #32190
Specifically, in GetBlobsV1 engine API, if any blob is missing, the null
should be placed in
response, unfortunately a behavioral change was introduced in #32190,
returning an error
instead.
What's more, a more comprehensive test suite is added to cover both
`GetBlobsV1` and
`GetBlobsV2` endpoints.
Switches to using counters so that the gauges don't cause any
information to be lost. Counters can be used to calculate all sorts of
metrics on Grafana. Which is also why min/avg/max logic is removed to
make things simple and small here.
~Will probably be mostly supplanted by #32224, but this should do for
now for devnet 3.~
Seems like #32224 is going to take some more time, so I have completed
the implementation of eth_config here. It is quite a bit simpler to
implement now that the config hashing was removed.
---------
Co-authored-by: MariusVanDerWijden <m.vanderwijden@live.de>
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Implement the binary tree as specified in [eip-7864](https://eips.ethereum.org/EIPS/eip-7864).
This will gradually replace verkle trees in the codebase. This is only
running the tests and will not be executed in production, but will help
me rebase some of my work, so that it doesn't bitrot as much.
---------
Signed-off-by: Guillaume Ballet
Co-authored-by: Parithosh Jayanthi <parithosh.jayanthi@ethereum.org>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Filtering for leaf nodes was missing from #32388, which means that even
the root done was reported, which made little sense for the bloatnet
data processing we want to do.
### Summary
Fixes long-standing ETA calculation errors in progress indicators that
have been present since February 2021. The current implementation
produces increasingly inaccurate estimates due to integer division
precision loss.
### Problem
3aeccadd04/triedb/pathdb/history_indexer.go (L541-L553)
The ETA calculation has two critical issues:
1. **Integer division precision loss**: `speed` is calculated as
`uint64`
2. **Off-by-one**: `speed` uses `+ 1`(2 times) to avoid division by
zero, however it makes mistake in the final calculation
This results in wildly inaccurate time estimates that don't improve as
progress continues.
### Example
Current output during state history indexing:
```
lvl=info msg="Indexing state history" processed=16858580 left=41802252 elapsed=18h22m59.848s eta=11h36m42.252s
```
**Expected calculation:**
- Speed: 16858580 ÷ 66179848ms = 0.255 blocks/ms
- ETA: 41802252 ÷ 0.255 = ~45.6 hours
**Current buggy calculation:**
- Speed: rounds to 1 block/ms
- ETA: 41802252 ÷ 1 = ~11.6 hours ❌
### Solution
- Created centralized `CalculateETA()` function in common package
- Replaced all 8 duplicate code copies across the codebase
### Testing
Verified accurate ETA calculations during archive node reindexing with
significantly improved time estimates.
`db inspect` on the full database currently takes **30min+**, because
the db iterate was run in one thread, propose to split the key-space to
256 sub range, and assign them to the worker pool to speed up.
After the change, the time of running `db inspect --workers 16` reduced
to **10min**(the keyspace is not evenly distributed).
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This pull request preserves the root->ID mappings in the path database
even after the associated state histories are truncated, regardless of
whether the truncation occurs at the head or the tail.
The motivation is to support an additional history type, trienode history.
Since the root->ID mappings are shared between two history instances,
they must not be removed by either one.
As a consequence, the root->ID mappings remain in the database even
after the corresponding histories are pruned. While these mappings may
become dangling, it is safe and cheap to keep them.
Additionally, this pull request enhances validation during historical
reader construction, ensuring that only canonical historical state will be
served.
When maxPeers was just above some perfect square, and a few peers
dropped for some reason, we changed the peer selection function.
When new peers were acquired, we changed again.
This PR improves the selection function, in two ways. First, it will always select
sqrt(peers) to broadcast to. Second, the selection now uses siphash with a secret
key, to guard against information leaks about tx source.
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
Fixes a prestateTracer test case covering 7702 delegation.
---------
Co-authored-by: Jared Wasinger <j-wasinger@hotmail.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This pull request implements #32235 , constructing blob sidecar in new
format (cell proof)
if the Osaka has been activated.
Apart from that, it introduces a pre-conversion step in the blob pool
before adding the txs.
This mechanism is essential for handling the remote **legacy** blob txs
from the network.
One thing is still missing and probably is worthy being highlighted
here: the blobpool may
contain several legacy blob txs before the Osaka and these txs should be
converted once
Osaka is activated. While the `GetBlob` API in blobpool is capable for
generating cell proofs
at the runtime, converting legacy txs at one time is much cheaper
overall.
---------
Co-authored-by: MariusVanDerWijden <m.vanderwijden@live.de>
Co-authored-by: lightclient <lightclient@protonmail.com>
Replace hardcoded 5-second sleep with polling loop that actively checks
snap sync state. This approach is already used in other project tests
(like account_cache_test.go) and provides better reliability by:
- Reducing flaky behavior on slower systems
- Finishing early when sync completes quickly
- Using 1-second timeout with 100ms polling intervals
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
closes#32240#32232
The main cause for the time out is the slow json encoding of large data.
In #32240 they tried to resolve the issue by reducing the size of the
test. However as Felix pointed out, the test is still kind of confusing.
I've refactored the test so it is more understandable and have reduced
the amount of data needed to be json encoded. I think it is still
important to ensure that the default read limit is not active, so I have
retained one large (~32 MB) test case, but it's at least smaller than
the existing ~64 MB test case.
This pull request refactors the internal implementation in path database
a bit, specifically:
- purge the state index data in batch
- simplify the logic of state history construction and index, make it more readable
This is a internal refactoring PR, renaming the history to stateHistory.
It's a pre-requisite PR for merging trienode history, avoid the name
conflict.
The TestTraceChain function was missing a defer backend.teardown() call,
which is required to properly release blockchain resources after test
completion.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Full disclosure: this has been generated by AI. The goal is to have a
quick check that the PR format is correct, before we merge it. This is
to avoid the periodical case when someone forgets to add a milestone or
check the title matches our preferred format.
Supersedes #32470.
### What
- snap: shorten stall watchdog in `eth/protocols/snap/sync_test.go` from
1m to 10s.
- discover/v5: consolidate FINDNODE negative tests into a single
table-driven test:
- `TestUDPv5_findnodeCall_InvalidNodes` covers:
- invalid IP (unspecified `0.0.0.0`) → ignored
- low UDP port (`<=1024`) → ignored
### Why
- Addresses TODOs:
- “Make tests smaller” (reduce long 1m timeout).
- “check invalid IPs”; also cover low port per `verifyResponseNode`
rules (UDP must be >1024).
### How it’s validated
- Test-only changes; no production code touched.
- Local runs:
- `go test ./p2p/discover -count=1 -timeout=300s` → ok
- `go test ./eth/protocols/snap -count=1 -timeout=600s` → ok
- Lint:
- `go run build/ci.go lint` → 0 issues on modified files.
### Notes
- The test harness uses `enode.ValidSchemesForTesting` (which includes
the “null” scheme), so records signed with `enode.SignNull` are
signature-valid; failures here are due to IP/port validation in
`verifyResponseNode` and `netutil.CheckRelayAddr`.
- Tests are written as a single table-driven function for clarity; no
helpers or environment switching.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
This PR should reduce overall allocations of a running node by ~10
percent. Since most allocations are coming from the re-heaping of the
transaction pool.
```
(pprof) list EffectiveGasTipCmp
Total: 38197204475
ROUTINE ======================== github.com/ethereum/go-ethereum/core/types.(*Transaction).EffectiveGasTipCmp in github.com/ethereum/go-ethereum/core/types/transaction.go
0 3766837369 (flat, cum) 9.86% of Total
. . 386:func (tx *Transaction) EffectiveGasTipCmp(other *Transaction, baseFee *big.Int) int {
. . 387: if baseFee == nil {
. . 388: return tx.GasTipCapCmp(other)
. . 389: }
. . 390: // Use more efficient internal method.
. . 391: txTip, otherTip := new(big.Int), new(big.Int)
. 1796172553 392: tx.calcEffectiveGasTip(txTip, baseFee)
. 1970664816 393: other.calcEffectiveGasTip(otherTip, baseFee)
. . 394: return txTip.Cmp(otherTip)
. . 395:}
. . 396:
. . 397:// EffectiveGasTipIntCmp compares the effective gasTipCap of a transaction to the given gasTipCap.
. . 398:func (tx *Transaction) EffectiveGasTipIntCmp(other *big.Int, baseFee *big.Int) int {
```
This PR reduces the allocations for comparing two transactions from 2 to
0:
```
goos: linux
goarch: amd64
pkg: github.com/ethereum/go-ethereum/core/types
cpu: Intel(R) Core(TM) Ultra 7 155U
│ /tmp/old.txt │ /tmp/new.txt │
│ sec/op │ sec/op vs base │
EffectiveGasTipCmp/Original-14 64.67n ± 2% 25.13n ± 9% -61.13% (p=0.000 n=10)
│ /tmp/old.txt │ /tmp/new.txt │
│ B/op │ B/op vs base │
EffectiveGasTipCmp/Original-14 16.00 ± 0% 0.00 ± 0% -100.00% (p=0.000 n=10)
│ /tmp/old.txt │ /tmp/new.txt │
│ allocs/op │ allocs/op vs base │
EffectiveGasTipCmp/Original-14 2.000 ± 0% 0.000 ± 0% -100.00% (p=0.000 n=10)
```
It also speeds up the process by ~60%
There are two minor caveats with this PR:
- We change the API for `EffectiveGasTipCmp` and `EffectiveGasTipIntCmp`
(which are probably not used by much)
- We slightly change the behavior of `tx.EffectiveGasTip` when it
returns an error. It would previously return a negative number on error,
now it does not (since uint256 does not allow for negative numbers)
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Co-authored-by: Csaba Kiraly <csaba.kiraly@gmail.com>
## Description
This PR fixes a bug in the Ledger hardware wallet version validation
logic for EIP-155 transaction signing. The original condition
incorrectly allowed older versions that don't support EIP-155 such as
0.9.9 and 0.1.5 to proceed.
This pull introduces a `Prefetch` operation in the trie to prefetch trie
nodes in parallel. It is used by the `triePrefetcher` to accelerate state
loading and improve overall chain processing performance.
## Summary
This PR addresses a DoS vulnerability in the GraphQL service by
implementing a maximum query depth limit. While #26026 introduced
timeout handling, it didn't fully mitigate the attack vector where
deeply nested queries can still consume excessive CPU and memory
resources before the timeout is reached.
## Changes
- Added `maxQueryDepth` constant (set to 20) to limit the maximum
nesting depth of GraphQL queries
- Applied the depth limit using `graphql.MaxDepth()` option when parsing
the schema
- Added test case `TestGraphQLMaxDepth` to verify that queries exceeding
the depth limit are properly rejected
## Security Impact
Without query depth limits, malicious actors could craft deeply nested
queries that:
- Consume excessive CPU cycles during query parsing and execution
- Allocate large amounts of memory for nested result structures
- Potentially cause service degradation or outages even with timeout
protection
This fix complements the existing timeout mechanism by preventing
resource-intensive queries from being executed in the first place.
## Testing
Added `TestGraphQLMaxDepth` which verifies that queries with nesting
depth > 20 are rejected with a `MaxDepthExceeded` error.
## References
- Original issue: #26026
- Related security best practices:
https://www.howtographql.com/advanced/4-security/
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Exposing the public method to setReadLimits for Websocket RPC to
prevent OOM.
Current, Geth Server is using a default 32MB max read limit (message
size) for websocket, which is prune to being attacked for OOM. Any one
can easily launch a client to send a bunch of concurrent large request
to cause the node to crash for OOM. One example of such script that can
easily crash a Geth node running websocket server is like this:
ec830979ac/poc.go
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Continuation of https://github.com/ethereum/go-ethereum/issues/32022
tablewriter assumes unix or windows, which may not be the case for
embedded targets.
For v0.0.5 of tablewriter, it is noted in table.go: "The protocols were
written in pure Go and works on windows and unix systems"
---------
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
The order of the checks was wrong which would have allowed a call to
modexp with `baseLen == 0 && modLen == 0` post fusaka.
Also handles an edge case where base/mod/exp length >= 2**64
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This changes the implementation to resolve the blob parameters according
to the current header timestamp. This matters for EIP-7918, where we
would previously resolve the UpdateFraction according to the parent
header fork, leading to a confusing situation at the fork transition
block.
---------
Co-authored-by: MariusVanDerWijden <m.vanderwijden@live.de>
This add some of the changes that were missing from #31634. It
introduces the `TransitionTrie`, which is a façade pattern between the
current MPT trie and the overlay tree.
---------
Signed-off-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
**Problem:** Including full account code in prestateTracer response
significantly increases response payload size.
**Solution:** Add codeHash field to the response. This will allow
client-side bytecode caching and is a non-breaking change.
**Note:** codeHash for EoAs is excluded to save space.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
## Description
Correct symmetric tolerance in gas limit validation:
Replace ambiguous "+-=" with standard "+/-" in the error message.
Logic rejects when |header − parent| ≥ limit, so allowed range is |Δ| ≤
limit − 1.
No logic or functionality has been modified.
These changes made in the PR should be highlighted here
The trie tracer is split into two distinct structs: opTracer and prevalueTracer.
The former is specific to MPT, while the latter is generic and applicable to all
trie implementations.
The original values of dirty nodes are tracked in a NodeSet. This serves
as the foundation for both full archive node implementations and the state live
tracer.
The GetHeader function was incorrectly returning an error when
encountering nil peers in the peers list, which contradicted the comment
"keep retrying if none are yet available".
Changed the logic to skip nil peers with 'continue' instead of returning
an error, allowing the function to properly iterate through all
available peers and attempt to retrieve the target header from each valid peer.
This ensures the function behaves as intended - trying all available
peers before giving up, rather than failing on the first nil peer encountered.
The previous comment stated that every 3rd block has a tx and every 5th
has an uncle.
The implementation actually adds one transaction to every second block
and does not add uncles.
Updated the comment to reflect the real behavior to avoid confusion when
reading tests.
Add missing it.Error() check after iteration in Database.DeleteRange to
avoid silently ignoring iterator errors before writing the batch.
Aligns behavior with batch.DeleteRange, which already validates iterator
errors. No other functional changes; existing tests pass (TestLevelDB).
This PR makes 2 changes to how
[EIP-7825](https://github.com/ethereum/go-ethereum/pull/31824) behaves.
When `eth_estimateGas` or `eth_createAccessList` is called without any
gas limit in the payload, geth will choose the block's gas limit or the
`RPCGasCap`, which can be larger than the `maxTxGas`.
When this happens for `estimateGas`, the gas estimation just errors out
and ends, when it should continue doing binary search to find the lowest
possible gas limit.
This PR will:
- Add a check to see if `hi` is larger than `maxTxGas` and cap it to
`maxTxGas` if it's larger. And add a special case handling for gas
estimation execute when it errs with `ErrGasLimitTooHigh`
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
- If all the `vhashes` are in the same `sidecar`, then it will load the
same blob tx many times. This PR aims to upgrade this.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This is the first part of #31532
It maintains a series of conversion maker which are to be updated by the
conversion code (in a follow-up PR, this is a breakdown of a larger PR
to make things easier to review). They can be used in this way:
- During the conversion, by storing the conversion markers when the
block has been processed. This is meant to be written in a function that
isn't currently present, hence [this
TODO](https://github.com/ethereum/go-ethereum/pull/31634/files#diff-89272f61e115723833d498a0acbe59fa2286e3dc7276a676a7f7816f21e248b7R384).
Part of https://github.com/ethereum/go-ethereum/issues/31583
---------
Signed-off-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This introduces an error when the filter has both `blockHash` and
`fromBlock`/`toBlock`, since these are mutually exclusive. Seems the
tests were actually returning `not found` error, which went undetected
since there was no check on the actual returned error in the test.
This adds a method on vm.EVM to set the jumpdest cache implementation.
It can be used to maintain an analysis cache across VM invocations, to improve
performance by skipping the analysis for already known contracts.
---------
Co-authored-by: lmittmann <lmittmann@users.noreply.github.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This pull request optimizes trie hashing by reducing memory allocation
overhead. Specifically:
- define a fullNodeEncoder pool to reuse encoders and avoid memory
allocations.
- simplify the encoding logic for shortNode and fullNode by getting rid
of the Go interfaces.
This PR addresses a flakiness in the rollback test discussed in
https://github.com/ethereum/go-ethereum/issues/32252
I found `nonce` collision caused transactions occasionally fail to send.
I tried to change error message in the failed test like:
```
if err = client.SendTransaction(ctx, signedTx); err != nil {
t.Fatalf("failed to send transaction: %v, nonce: %d", err, signedTx.Nonce())
}
```
and I occasionally got test failure with this message:
```
=== CONT TestFlakyFunction/Run_#100
rollback_test.go:44: failed to send transaction: already known, nonce: 0
--- FAIL: TestFlakyFunction/Run_#100 (0.07s)
```
Although `nonces` are obtained via `PendingNonceAt`, we observed that,
in rare cases (approximately 1 in 1000), two transactions from the same
sender end up with the same nonce. This likely happens because `tx0` has
not yet propagated to the transaction pool before `tx1` requests its
nonce. When the test succeeds, `tx0` and `tx1` have nonces `0` and `1`,
respectively. However, in rare failures, both transactions end up with
nonce `0`.
We modified the test to explicitly assign nonces to each transaction. By
controlling the nonce values manually, we eliminated the race condition
and ensured consistent behavior. After several thousand runs, the
flakiness was no longer reproducible in my local environment.
Reduced internal polling interval in `pendingStateHasTx()` to speed up
test execution without impacting stability. It reduces test time for
`TestTransactionRollbackBehavior` from about 7 seconds to 2 seconds.
Correct the error message in the ExecuteStatelessPayloadV4 function to
reference newPayloadV4 and the Prague fork, instead of incorrectly
referencing newPayloadV3 and Cancun.
This improves clarity during debugging and aligns the error message with
the actual function and fork being validated. No logic is changed.
---------
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Seems the `signal.result` was not sent back in shorten case, this will
cause a deadlock.
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Replace manual byte-by-byte XOR implementation with the optimized
bitutil.XORBytes function. This improves performance by using word-sized
operations on supported architectures while maintaining the same
functionality. The optimized version processes data in bulk rather than
one byte at a time
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
`binary.AppendUvarint` offers better performance than using append
directly, because it avoids unnecessary memory allocation and copying.
In our case, it can increase the performance by +35.8% for the
`blockWriter.append` function:
```
benchmark old ns/op new ns/op delta
BenchmarkBlockWriterAppend-8 5.97 3.83 -35.80%
```
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
[EIP-7594](https://eips.ethereum.org/EIPS/eip-7594) defines a limit of
max 6 blobs per transaction. We need to enforce this limit during block
processing.
> Additionally, a limit of 6 blobs per transaction is introduced.
Clients MUST enforce this limit when validating blob transactions at
submission time, when received from the network, and during block
production and processing.
The main purpose of this change is to enforce the version setting when
constructing the blobSidecar, avoiding creating sidecar with wrong/default
version tag.
The implementation of `parseIndexBlock` used a reverse loop with slice
appends to build the restart points, which was less cache-friendly and
involved unnecessary allocations and operations. In this PR we change
the implementation to read and validate the restart points in one single
forward loop.
Here is the benchmark test:
```bash
go test -benchmem -bench=BenchmarkParseIndexBlock ./triedb/pathdb/
```
The result as below:
```
benchmark old ns/op new ns/op delta
BenchmarkParseIndexBlock-8 52.9 37.5 -29.05%
```
about 29% improvements
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Fixes#32175.
This fixes the scenario where the blockhash opcode would return 0x0
during RPC simulations when using BlockOverrides with a future block
number. The root cause was that BlockOverrides.Apply() only modified the
vm.BlockContext, but GetHashFn() depends on the actual
types.Header.Number to resolve valid historical block hashes. This
caused a mismatch and resulted in incorrect behavior during trace and
call simulations.
---------
Co-authored-by: shantichanal <158101918+shantichanal@users.noreply.github.com>
Co-authored-by: lightclient <lightclient@protonmail.com>
The root cause of the flaky test was a nonce conflict caused by async
contract deployments.
This solution defines a custom deployer with automatic nonce management.
This is something interesting I came across during my benchmarks, we
spent ~3.8% of all allocations allocating the header number on the heap.
```
(pprof) list GetHeaderByHash
Total: 38197204475
ROUTINE ======================== github.com/ethereum/go-ethereum/core.(*BlockChain).GetHeaderByHash in github.com/ethereum/go-ethereum/core/blockchain_reader.go
0 5786566117 (flat, cum) 15.15% of Total
. . 79:func (bc *BlockChain) GetHeaderByHash(hash common.Hash) *types.Header {
. 5786566117 80: return bc.hc.GetHeaderByHash(hash)
. . 81:}
. . 82:
. . 83:// GetHeaderByNumber retrieves a block header from the database by number,
. . 84:// caching it (associated with its hash) if found.
. . 85:func (bc *BlockChain) GetHeaderByNumber(number uint64) *types.Header {
ROUTINE ======================== github.com/ethereum/go-ethereum/core.(*HeaderChain).GetHeaderByHash in github.com/ethereum/go-ethereum/core/headerchain.go
0 5786566117 (flat, cum) 15.15% of Total
. . 404:func (hc *HeaderChain) GetHeaderByHash(hash common.Hash) *types.Header {
. 1471264309 405: number := hc.GetBlockNumber(hash)
. . 406: if number == nil {
. . 407: return nil
. . 408: }
. 4315301808 409: return hc.GetHeader(hash, *number)
. . 410:}
. . 411:
. . 412:// HasHeader checks if a block header is present in the database or not.
. . 413:// In theory, if header is present in the database, all relative components
. . 414:// like td and hash->number should be present too.
(pprof) list GetBlockNumber
Total: 38197204475
ROUTINE ======================== github.com/ethereum/go-ethereum/core.(*HeaderChain).GetBlockNumber in github.com/ethereum/go-ethereum/core/headerchain.go
94438817 1471264309 (flat, cum) 3.85% of Total
. . 100:func (hc *HeaderChain) GetBlockNumber(hash common.Hash) *uint64 {
94438817 94438817 101: if cached, ok := hc.numberCache.Get(hash); ok {
. . 102: return &cached
. . 103: }
. 1376270828 104: number := rawdb.ReadHeaderNumber(hc.chainDb, hash)
. . 105: if number != nil {
. 554664 106: hc.numberCache.Add(hash, *number)
. . 107: }
. . 108: return number
. . 109:}
. . 110:
. . 111:type headerWriteResult struct {
(pprof) list ReadHeaderNumber
Total: 38197204475
ROUTINE ======================== github.com/ethereum/go-ethereum/core/rawdb.ReadHeaderNumber in github.com/ethereum/go-ethereum/core/rawdb/accessors_chain.go
204606513 1376270828 (flat, cum) 3.60% of Total
. . 146:func ReadHeaderNumber(db ethdb.KeyValueReader, hash common.Hash) *uint64 {
109577863 1281242178 147: data, _ := db.Get(headerNumberKey(hash))
. . 148: if len(data) != 8 {
. . 149: return nil
. . 150: }
95028650 95028650 151: number := binary.BigEndian.Uint64(data)
. . 152: return &number
. . 153:}
. . 154:
. . 155:// WriteHeaderNumber stores the hash->number mapping.
. . 156:func WriteHeaderNumber(db ethdb.KeyValueWriter, hash common.Hash, number uint64) {
```
Opening this to discuss the idea, I know that rawdb.EmptyNumber is not a
great name for the variable, open to suggestions
---
**Description:**
- Replaced outdated GitHub wiki links with current, official
documentation URLs.
- Removed links that redirect or are no longer relevant.
- Ensured all references point to up-to-date and reliable sources.
---
This pull request slightly improves the freezer fsync mechanism by scheduling
the Sync operation based on the number of uncommitted items and original
time interval.
Originally, freezer.Sync was triggered every 30 seconds, which worked well during
active chain synchronization. However, once the initial state sync is complete,
the fixed interval causes Sync to be scheduled too frequently.
To address this, the scheduling logic has been improved to consider both the time
interval and the number of uncommitted items. This additional condition helps
avoid unnecessary Sync operations when the chain is idle.
Introduce file-based state journal in path database, fixing
the Pebble restriction when the journal size exceeds 4GB.
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR fixes an issue in the tx_fetcher DoS prevention logic where the
code keeps the overflow amount (`want - maxTxAnnounces`) instead of the
allowed amount (`maxTxAnnounces - used`). The specific changes are:
- Correct slice indexing in the announcement drop logic
- Extend the overflow test case to cover the inversion scenario
This is a resubmit of https://github.com/ethereum/go-ethereum/pull/31820
against the `master` branch.
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
---
**Description:**
- Replaced outdated GitHub wiki links with the official Ethereum
documentation for Web3 Secret Storage.
- Updated references in `keystore.go` and `passphrase.go` for improved
accuracy and reliability.
---
This pull request fixes an issue in disabling direct-ancient mode in
snap sync.
Specifically, if `origin >= frozen && origin != 0`, it implies a part of
chain data has been written into the key-value store, all the following
writes into ancient store scheduled by downloader will be rejected
with error
`ERROR[07-10|03:46:57.924] Error importing chain data to ancients
err="can't add block 1166 hash: the append operation is out-order: have
1166 want 0"`.
This issue is detected by the https://github.com/ethpandaops/kurtosis-sync-test,
which initiates the first snap sync cycle without the finalized header and
implicitly disables the direct-ancient mode. A few seconds later the second
snap sync cycle is initiated with the finalized information and direct-ancient mode
is enabled incorrectly.
This adds the SSZ types from the
[EIP-7928](https://eips.ethereum.org/EIPS/eip-7928) and also adds
encoder/decoder generation using https://github.com/ferranbt/fastssz.
The fastssz dependency is updated because the generation will not work
properly with the master branch version due to a bug in fastssz.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR updates the outdated documentation URL from docs.gnosis.io to
the new official docs.safe.global domain. The change reflects the
rebranding from Gnosis Safe to Safe and ensures that users are directed
to the current API documentation for transaction service reference.
This PR adds a block validation check for the maximum block size, as required by
EIP-7934, and also applies a slightly lower size limit during block building.
---------
Co-authored-by: spencer-tb <spencer@spencertaylorbrown.uk>
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
alternate approach to https://github.com/ethereum/go-ethereum/pull/31328
suggested by @MariusVanDerWijden . This prevents Geth from outputting a
lot of logs when trying to commit on-demand dev mode blocks while the
client is shutting down.
The issue is hard to reproduce, but I've seen it myself and it is
annoying when it happens. I think this is a reasonable simple solution,
and we can revisit if we find that the output is still too large (i.e.
there is a large delay between initiating shut down and the simulated
beacon receiving the signal, while in this loop).
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This change enables more tests to run on GitHub actions. First, it
removes the `-short` flag passed to `go test`, unskipping some longer
running tests. We also enable the full consensus tests to run by
enabling submodules during git clone.
The EF now operates org wide runners with the `self-hosted-ghr` label.
These are auto-scaling runners which should ideally allow us to process
any amount of testing load we throw at them. The new runners have `HOME`
configured differently from the actual user home directory, so our
internal test for resolving `~` had to be adapted to work in this scenario.
This is a follow up PR after #32128 , Seems I've missed to add
--txlookuplimit as hidden. In hte meanwhile, I also add the other
deprecated flags into the output of `show-deprecated-flags`
Improves the SSTORE gas calculation a bit. Previously we would pull up
the state object twice. This is okay for existing objects, since they
are cached, however non-existing objects are not cached, thus we needed
to go through all 128 diff layers as well as the disk layer twice, just
for the gas calculation
```
goos: linux
goarch: amd64
pkg: github.com/ethereum/go-ethereum/core/vm
cpu: AMD Ryzen 9 5900X 12-Core Processor
│ /tmp/old.txt │ /tmp/new.txt │
│ sec/op │ sec/op vs base │
Interpreter-24 1118.0n ± 2% 602.8n ± 1% -46.09% (p=0.000 n=10)
```
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Small update for logs when syncing with blsync. Downgrades the "latest
filled block is not available" to warn.
Co-authored-by: shantichanal <158101918+shantichanal@users.noreply.github.com>
1. Fix the error return format.
**todo**: ~~`bindtype` needs more complex logic to fix it.~~
`
if err != nil {
return nil, err
}
if err == nil {
return obj, nil
}
`
2. ~~Return pointer type object to avoid copying the whole struct
content.~~
3. Give the panic decision to the user.
4. Fix empty line at the end of function.
**TODO**: ~~fix some related test cases.~~
---------
Co-authored-by: Jared Wasinger <j-wasinger@hotmail.com>
geth cmd: `geth --dev --dev.period 5`
call: `debug.setHead` to rollback several blocks.
If the `debug.setHead` call is delayed, it will trigger a panic with a
small probability, due to using the null point of
`fcResponse.PayloadID`.
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This pull request refines the filtermap implementation, defining key
APIs for map and
epoch calculations to improve readability.
This pull request doesn't change any logic, it's a pure cleanup.
---------
Co-authored-by: zsfelfoldi <zsfelfoldi@gmail.com>
## Summary
This PR resolves Issue #31929 by reducing log noise generated by the log
indexer after `debug_setHead` operations.
## Problem Description
When `debug_setHead` is called to rewind the blockchain, blocks are
removed from the database. However, the log indexer's `ChainView`
objects may still hold references to these deleted blocks. When
`extendNonCanonical()` attempts to access these missing headers, it
results in:
1. **Repeated ERROR logs**: `Header not found number=X hash=0x...`
2. **Log noise** that can mask other important errors
3. **User confusion** about whether this indicates a real problem
## Root Cause Analysis
The issue occurs because:
- `debug_setHead` removes blocks from the blockchain database
- Log indexer's `ChainView` may still reference deleted block hashes
- `extendNonCanonical()` in `core/filtermaps/chain_view.go` tries to
fetch these missing headers
- The existing `return false` logic properly handles the error, but logs
at ERROR level
## Solution
This is a **logging improvement only** - no functional logic changes:
### Changes Made
1. **Log level**: Changed from `ERROR` to `DEBUG`
2. **Log message**: Enhanced with descriptive context about chain view
extension
3. **Comments**: Added explanation for when this situation occurs
4. **Behavior**: Maintains existing error handling (`return false` was
already present)
### Code Changes
```go
// Before
log.Error("Header not found", "number", number, "hash", hash)
return false
// After
// Header not found - this can happen after debug_setHead operations
// where blocks have been deleted. Return false to indicate the chain view
// is no longer valid rather than logging repeated errors.
log.Debug("Header not found during chain view extension", "number", number, "hash", hash)
return false
```
## Testing
### Automated Tests
- ✅ All existing filtermaps tests pass: `go test ./core/filtermaps -v`
- ✅ No regressions in related functionality
### Manual Verification
1. **Before fix**: Started geth in dev mode, generated blocks, called
`debug_setHead(3)` → **5 repeated ERROR logs**
2. **After fix**: Same scenario → **4 DEBUG logs, no ERROR noise**
### Test Environment
```bash
# Setup test environment
rm -rf ./dev-test-data
./build/bin/geth --dev --datadir ./dev-test-data --http --http.api debug,eth,net,web3 --verbosity 4
# Generate test blocks and trigger issue
curl -X POST -H "Content-Type: application/json" --data '{"jsonrpc":"2.0","method":"debug_setHead","params":["0x3"],"id":1}' http://localhost:8545
```
## Related Issues
- Fixes#31929
## Additional Context
This issue was reported as spurious error messages appearing after
`debug_setHead` operations. The investigation revealed that while the
error handling was functionally correct, the ERROR log level was
inappropriate for this expected scenario in development/debugging
workflows.
The fix maintains full compatibility while significantly improving the
debugging experience for developers using `debug_setHead`.
---------
Co-authored-by: Sun Tae, Kim <38067691+humblefirm@users.noreply.github.com>
Co-authored-by: zsfelfoldi <zsfelfoldi@gmail.com>
The address filter was never checked against a maximum limit, which can
be somewhat abusive for API nodes. This PR adds a limit similar to
topics
## Description (AI generated)
This pull request introduces a new validation to enforce a maximum limit
on the number of addresses allowed in filter criteria for Ethereum logs.
It includes updates to the `FilterAPI` and `EventSystem` logic, as well
as corresponding test cases to ensure the new constraint is properly
enforced.
### Core functionality changes:
* **Validation for maximum addresses in filter criteria**:
- Added a new constant, `maxAddresses`, set to 100, to define the
maximum allowable addresses in a filter.
- Introduced a new error, `errExceedMaxAddresses`, to handle cases where
the number of addresses exceeds the limit.
- Updated the `GetLogs` method in `FilterAPI` to validate the number of
addresses against `maxAddresses`.
- Modified the `UnmarshalJSON` method to return an error if the number
of addresses in the input JSON exceeds `maxAddresses`.
- Added similar validation to the `SubscribeLogs` method in
`EventSystem`.
### Test updates:
* **New test cases for address limit validation**:
- Added a test in `TestUnmarshalJSONNewFilterArgs` to verify that
exceeding the maximum number of addresses triggers the
`errExceedMaxAddresses` error.
- Updated `TestInvalidLogFilterCreation` to include a test case for an
invalid filter with more than `maxAddresses` addresses.
- Updated `TestInvalidGetLogsRequest` to test for invalid log requests
with excessive addresses.
These changes ensure that the system enforces a reasonable limit on the
number of addresses in filter criteria, improving robustness and
preventing potential performance issues.
---------
Co-authored-by: zsfelfoldi <zsfelfoldi@gmail.com>
Fix the issue after initial snap sync with `gcmode=archive` enabled.
```
NewPayload: inserting block failed error="history indexing is out of order, last: null, requested: 1"
```
---------
Signed-off-by: Delweng <delweng@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
core.BlockChainConfig.VmConfig is not a pointer, so setting the Tracer
on the `vmConfig` object after it was passed to options does *not* apply
it to options.VmConfig
This fixes the issue by setting the value directly inside the `options`
object and removing the confusing `vmConfig` variable to prevent further
mistakes.
This pull request tracks the state indexing progress in eth_syncing
RPC response, i.e. we will return non-null syncing status until indexing
has finished.
This pull request fixes a flaw in the PBSS state iterator, which
could return empty account or storage data.
In PBSS, multiple in-memory diff layers and a write buffer are
maintained. These layers are persisted to the database and reloaded after
node restarts. However, since the state data is encoded using RLP, the
distinction between nil and an empty byte slice is lost during the encode/decode
process. As a result, invalid state values such as `[]byte{}` can appear in PBSS
and ultimately be returned by the state iterator.
Checkout
https://github.com/ethereum/go-ethereum/blob/master/triedb/pathdb/iterator_fast.go#L270
for more iterator details.
It's a long-term existent issue and now be activated since the snapshot
integration.
The error `err="range contains deletion"` will occur when Geth tries to
serve other
peers with SNAP protocol request.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This pull request fixes a flaw in PBSS archive mode that significantly
degrades performance when the mode is enabled.
Originally, in hash mode, the dirty trie cache is completely disabled
when archive mode is active, in order to disable the in-memory garbage
collection mechanism. However, the internal logic in path mode differs
significantly, and the dirty trie node cache is essential for maintaining
chain insertion performance. Therefore, the cache is now retained in
path mode.
Previously, the account trie for a given state root was resolved immediately
when the stateDB was created, implying that the trie was always required
by the stateDB.
However, this assumption no longer holds, especially for path archive nodes,
where historical states can be accessed even if the corresponding trie data
does not exist.
Downloading from a range was failing because it would return and error
early with an error misinterpreting "start-end".
---------
Co-authored-by: shantichanal <158101918+shantichanal@users.noreply.github.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Replaced the outdated and broken link to the Web3 Secret Storage
Definition with the current official URL from ethereum.org in the Clef
README. This ensures users have access to up-to-date and accurate
documentation for the keystore file format.
If Geth is engaged in a long-run block synchronization, such as a full
syncing over a large number of blocks, invoking `debug_setHead` will
cause `downloader.Cancel` to wait for all fetchers to stop first.
This can be time-consuming, particularly for the block processing
thread.
To address this, we manually call `blockchain.StopInsert` to interrupt
the blocking processing thread and allow it to exit immediately, and
after that call `blockchain.ResumeInsert` to resume the block
downloading process.
Additionally, we add a sanity check for the input block number of
`debug_setHead` to ensure its validity.
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Previously, PathDB used a single buffer to aggregate database writes,
which needed to be flushed atomically. However, flushing large amounts
of data (e.g., 256MB) caused significant overhead, often blocking the
system for around 3 seconds during the flush.
To mitigate this overhead and reduce performance spikes, a double-buffer
mechanism is introduced. When the active buffer fills up, it is marked
as frozen and a background flushing process is triggered. Meanwhile, a
new buffer is allocated for incoming writes, allowing operations to
continue uninterrupted.
This approach reduces system blocking times and provides flexibility in
adjusting buffer parameters for improved performance.
This pull request introduces a mechanism to expose statistics from the
state reader, specifically related to cache utilization during state prefetching.
To improve state access performance, a pair of state readers is constructed
with a shared local cache. One reader to execute transactions ahead of time
to warm up the cache. The other reader is used by the actual chain processing
logic, which can benefit from the prefetched states.
This PR adds visibility into how effective the cache is by exposing relevant
usage statistics.
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Co-authored-by: Csaba Kiraly <csaba.kiraly@gmail.com>
This PR improves the IsOnCurve methods for BN254 G2 points by:
* Clarifying its behavior the docstring, making it explicit that it
verifies both the point being on the curve and in the correct subgroup.
* Adding an in-line comment explaining the subgroup membership check
(c.Mul(Order)).
* Minor wording adjustments for readability and consistency.
The optimization tried to defer allocating the cache map until it was used for the
first time. It's a relic from earlier times, when tries were copied often. This seems
unnecessary now, so we can just create the map when the trie is created.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
In this pull request, the original `CacheConfig` has been renamed to `BlockChainConfig`.
Over time, more fields have been added to `CacheConfig` to support
blockchain configuration. Such as `ChainHistoryMode`, which clearly extends
beyond just caching concerns.
Additionally, adding new parameters to the blockchain constructor has
become increasingly complicated, since it’s initialized across multiple
places in the codebase. A natural solution is to consolidate these arguments
into a dedicated configuration struct.
As a result, the existing `CacheConfig` has been redefined as `BlockChainConfig`.
Some parameters, such as `VmConfig`, `TxLookupLimit`, and `ChainOverrides`
have been moved into `BlockChainConfig`. Besides, a few fields in `BlockChainConfig`
were renamed, specifically:
- `TrieCleanNoPrefetch` -> `NoPrefetch`
- `TrieDirtyDisabled` -> `ArchiveMode`
Notably, this change won't affect the command line flags or the toml
configuration file. It's just an internal refactoring and fully backward-compatible.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Since we have the effective gas price in the message, we can compute tip by
simply subtracting the basefee. No need to recompute the effective price.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Reading a single transaction out of a block shouldn't need decoding the
entire body
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
As https://github.com/ethereum/go-ethereum/pull/31769 defined a global
hash pool, so we can reuse it, and also remove the unnecessary
KeccakState buffering
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Adds marshaling fuzzing for G1 and G2 to oss-fuzz.
Also aligns the behavior of the google library to that of gnark and
cloudflare, which only ever read the first 64 / 128 bytes of the input,
regardless of how long the input is
Fixes a data race on the `wallets` slice when closing account Manager.
At the moment, there is a data race between a go-routine calling the
Manager's `Close` function and the background go-routine handling most
operations on the `Manager`. The `Manager`'s `wallets` field is accessed
without proper synchronization.
By moving the closing of wallets from the `Close()` function into the
background thread, this issue can be resolved.
This pull request reduces the threshold for triggering compaction at
level0, leading to less compaction debt. This change is helpful in the
case of heavy write-load, mitigating the case of heavy write stalls
caused by compaction.
closes https://github.com/ethereum/go-ethereum/issues/31830
When `GetKey` is called, a missing preimage can cause the function to return a `nil`
key. This, in turn, makes `account.Storage` persist an incorrect value.
This fixes a data race when accessing the `httpConfig.prefix` field.
This field can be modified while the server is running through
`enableRPC`. The fix is storing the prefix in the handler, which is
accessed through the atomic pointer.
alternative to #32035
fixes https://github.com/ethereum/go-ethereum/issues/32019
The prestateTracer had the intention of excluding accounts that were
empty prior to execution from the prestate. This was being done only for
created contracts. This PR makes it so all such empty accounts are
excluded. This behavior is configurable using the `includeEmpty: true`
flag introduced in #31855.
---------
Signed-off-by: Ignacio Hagopian <jsign.uy@gmail.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR introduces a flag that enables returning of newly created state
objects in the prestateTracer.
**Rationale**
Having this information is useful because local execution can more
easily distinguish between newly created objects and system contracts.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
As the preimage will only be stored if `t.preimages != nil`, so no need
to save them into local cache if not enabled. This will reduce the memory
wasted to copy the bytes
---------
Signed-off-by: jsvisa <delweng@gmail.com>
This is a followup to #31753.
A cumulative counter is more useful when we need to measure / aggregate
the metric over a longer period of time. It also means we won't miss data,
e.g. our prometheus scrapes every 30 seconds, and so may miss a transient
spike in the pre-aggregated mgas/s.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
With EOF removed from the Osaka fork, and no longer being tested, the
implementation will now just be bitrotting. I'm opting to remove it so
it doesn't get in the way of other changes.
This pull request introduces a new test suite in workload framework, for
transaction tracing.
**test generation**
`go run . tracegen --trace-tests trace-test.json http://host:8545`
and you can choose to store the trace result in a specific folder
`go run . tracegen --trace-tests trace-test.json --trace-output
./trace-result http://host:8545`
**test run**
`./workload test -run Trace/Transaction --trace-invalid ./trace-invalid
http://host:8545`
The mismatched trace result will be saved in the specific folder for
further investigation.
This pull request adjusts the number of allowed memory tables in Pebble.
Pebble allows configuring an arbitrary number of memory tables to hold
unflushed data. When the current memtable becomes full, it is scheduled
for flushing, and a new memtable is allocated to accept subsequent
writes. However, if too many memtables accumulate and are waiting to be
flushed, subsequent writes will stall.
Originally, only two memtables were configured, each with a size of 512
MB for Ethereum mainnet. While this setup works well under normal
conditions, it becomes problematic under heavy write loads. In such scenarios,
flushing is only triggered when more than 512 MB of data is pending, which may
not be responsive enough. Even worse, if compactions are running
concurrently, flushing memtables can become slow due to the heavy IO
overhead, leading to write stalls across the system.
This pull request tries to mitigate the performance degradation by having
more memory tables but with a smaller size. In this case, the pending
writes can be flushed more smoothly and responsively.
This changes the era1 downloader to place the files into the correct
location where geth will actually use them. Also adds integration with
the new --datadir.era flag.
This PR improves the speed of Disc/v4 and Disc/v5 based discovery by
adding a prefetch buffer to discovery sources, eliminating slowdowns
due to timeouts and rate mismatch between the two processes.
Since we now want to filter the discv4 nodes iterator, it is being removed
from the default discovery mix in p2p.Server. To keep backwards-compatibility,
the default unfiltered discovery iterator will be utilized by the server when
no protocol-specific discovery is configured.
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This fixes a regression introduced by #29158 where receipts of empty blocks
were stored into the database as an empty byte array, instead of an RLP empty list.
Fixes#31938
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This is an alternative approach to
https://github.com/ethereum/go-ethereum/pull/31607 , that doesn't break
backwards-compatibility with abigen.
Note that this does change the behavior of `Argument.Pack`: previously,
packing negative values for a `uint` parameter would cause them to be
represented in signed binary representation via two's complement. Now,
it will fail explicitly in this case.
However, I don't see a reason to support this functionality. The ABI
already explicitly supports signed integers. There's no reason that a
smart contract author would choose to store signed values in a `uint`
afaict.
---------
Co-authored-by: MariusVanDerWijden <m.vanderwijden@live.de>
Fixes an issue where querying logs for block ranges starting from 0 would fail with an irrelevant
error on a pruned node. Now the correct "history is pruned" error will be returned.
This situation was failing quietly for me recently when I had a partial
data corruption issue. Changing the log level to Error would increase
visibility for me.
This PR changes the database access of the base part of filter rows that
are stored in groups of 32 adjacent maps for improved database storage
size and data access efficiency.
Before this grouped storage was introduced, filter rows were not cached
because the access pattern of either the index rendering or the search
does not really benefit from caching. Also no mutex was necessary for
filter row access. Storing adjacent rows in groups complicated the
situation as a search typically required reading all or most of adjacent
rows of a group, so in order to implement the single row read operation
without having to read the entire group up to 32 times, a cache for the
base row groups was added. This also introduced data race issues for
concurrenct read/write in the same group which was avoided by locking
the `indexLock` mutex. Unfortunately this also led to slowed down or
temporarily blocked search operations when indexing was in progress.
This PR returns to the original concept of uncached, no-mutex filter map
access by increasing read efficiency in a better way; similiarly to
write operations that already operate on groups of filter maps, now
`getFilterMapRow` is also replaced by `getFilterMapRows` that accepts a
single `rowIndex` and a list of `mapIndices`. It slightly complicates
`singleMatcherInstance.getMatchesForLayer` which now has to collect
groups of map indices accessed in the same row, but in exchange it
guarantees maximum read efficiency while avoiding read/write mutex
interference.
Note: a follow-up refactoring is WIP that further changes the database
access scheme by prodiving an immutable index view to the matcher, makes
the whole indexer more straightforward with no callbacks, and entirely
removes the concept of matcher syncing with `validBlocks` and the
resulting multiple retry logic in `eth/filters/filter.go`. This might
take a bit longer to finish though and in the meantime this change could
hopefully already solve the blocked request issues.
This implements a backing store for chain history based on era1 files.
The new store is integrated with the freezer. Queries for blocks and receipts
below the current freezer tail are handled by the era store.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: lightclient <lightclient@protonmail.com>
This changes the API backend to return null for not-found blocks. This behavior
is required by the RPC When `BlockByNumberOrHash` always returned an error
for this case ever since being added in https://github.com/ethereum/go-ethereum/pull/19491.
The backend method has a couple of call sites, and all of them handle a `nil`
block result because `BlockByNumber` returns `nil` for not-found.
The only case where this makes a real difference is for `eth_getBlockReceipts`,
which was changed in #31361 to actually forward the error from `BlockByNumberOrHash`
to the caller.
Release artefact building has been migrated to another system (Gitea),
so we can finally stop using Travis CI. However, in order to have a
fail-safe for the release, I'm leaving the config in and it will still
trigger builds on Travis for tagged releases. That way, if our new
system fails to work for the next release, we will still have the option
of using Travis.
This PR modifies the disclaimer/banner that is printed when starting up
Geth in dev mode:
* if the client is spun up in ephemeral dev mode with a keystore
override, the address of the first (prefunded) account is printed.
* if the client is spun up in ephemeral mode without a keystore
override, the genesis allocation contains a single static prefunded EOA
account. It's address and private key are logged.
* the banner is printed at the end of client initialization to make it
more prominent. Previously, it was logged towards the beginning of
client initialization and subsequent logging from startup filled the
terminal, pushing it out of view of the user.
Other change is that we now use a static prefunded dev account instead
of generating a random one when instantiating a new dev mode chain.
This is an example of what the banner looks like:
```
WARN [05-28|23:05:16.475] You are running Geth in --dev mode. Please note the following:
WARN [05-28|23:05:16.475]
WARN [05-28|23:05:16.475] 1. This mode is only intended for fast, iterative development without assumptions on
WARN [05-28|23:05:16.475] security or persistence.
WARN [05-28|23:05:16.475] 2. The database is created in memory unless specified otherwise. Therefore, shutting down
WARN [05-28|23:05:16.475] your computer or losing power will wipe your entire block data and chain state for
WARN [05-28|23:05:16.475] your dev environment.
WARN [05-28|23:05:16.475] 3. A random, pre-allocated developer account will be available and unlocked as
WARN [05-28|23:05:16.475] eth.coinbase, which can be used for testing. The random dev account is temporary,
WARN [05-28|23:05:16.475] stored on a ramdisk, and will be lost if your machine is restarted.
WARN [05-28|23:05:16.475] 4. Mining is enabled by default. However, the client will only seal blocks if transactions
WARN [05-28|23:05:16.475] are pending in the mempool. The miner's minimum accepted gas price is 1.
WARN [05-28|23:05:16.475] 5. Networking is disabled; there is no listen-address, the maximum number of peers is set
WARN [05-28|23:05:16.475] to 0, and discovery is disabled.
WARN [05-28|23:05:16.475]
WARN [05-28|23:05:16.475]
WARN [05-28|23:05:16.475] Running in ephemeral mode. The following account has been prefunded in the genesis:
WARN [05-28|23:05:16.475]
WARN [05-28|23:05:16.475] Account
WARN [05-28|23:05:16.475] ------------------
WARN [05-28|23:05:16.475] 0x71562b71999873db5b286df957af199ec94617f7 (10^49 ETH)
WARN [05-28|23:05:16.475]
WARN [05-28|23:05:16.475] Private Key
WARN [05-28|23:05:16.475] ------------------
WARN [05-28|23:05:16.475] 0xb71c71a67e1177ad4e901695e1b4b9ee17ae16c6668d313eac2f96dbcda3f291
WARN [05-28|23:05:16.475]
```
closes#31796
---------
Co-authored-by: jwasinger <j-wasinger@hotmail.com>
This pull request introduces a mechanism to improve state lookup
efficiency in pathdb by maintaining a lookup structure that eliminates
unnecessary iteration over diff layers.
The core idea is to track a mutation history for each dirty state entry
residing in the diff layers. This history records the state roots of all layers
in which the entry was modified, sorted from oldest to newest.
During state lookup, this mutation history is queried to find the most
recent layer whose state root either matches the target root or is a
descendant of it. This allows us to quickly identify the layer containing
the relevant data, avoiding the need to iterate through all diff layers from
top to bottom.
Besides, the overhead for state lookup is constant, no matter how many
diff layers are retained in the pathdb, which unlocks the potential to hold
more diff layers.
Of course, maintaining this lookup structure introduces some overhead.
For each state transition, we need to:
(a) update the mutation records for the modified state entries, and
(b) remove stale mutation records associated with outdated layers.
On our benchmark machine, it will introduce around 1ms overhead which is
acceptable.
This adds support for the Github actions environment in the build tool.
Information from environment variables, like the build number and
branch/tag name, is used to make decisions about uploads and package
filenames.
Updated reference URL in accumulator.go comment to point to the correct
location of the historical-hashes-accumulator documentation in the
Ethereum portal network specs
We deleted outdated pectra-devnet-6@v1.0.0 release by mistake, so this
PR updates the referenced EEST release to the correct latest version.
@s1na I removed the TODO comment because I think this solves it, unless
it meant something else.
---------
Co-authored-by: MariusVanDerWijden <m.vanderwijden@live.de>
This PR introduces a new native tracer for AA bundlers. Bundlers participating in the alternative
mempool will need to validate userops. This tracer will return sufficient information for them to
decide whether griefing is possible. Resolves#30546
---------
Co-authored-by: Sina M <1591639+s1na@users.noreply.github.com>
Some tests involving transactions near the txMaxSize limit were flaky.
This was due to ECDSA signatures occasionally having leading zeros,
which are omitted during RLP encoding — making the final transaction
size 1 byte smaller than expected.
To address this, a new helper function pricedDataTransactionWithFixedSignature
was added. It ensures both r and s are exactly 32 bytes (i.e., no leading zeros),
producing transactions with deterministic size.
I've updated the broken link to point to the current official Ethereum
JSON-RPC API documentation at
https://ethereum.org/en/developers/docs/apis/json-rpc/. This is the
correct and up-to-date location for the Ethereum Execution Layer APIs
documentation. The link should now work properly.
I added a test for BlockRangeUpdate in #29158 but forgot to enable it.
Here I'm adding two more tests for it. Also applied a small refactoring
to combine calls to `dial()` and `peer()` into a single function, since
these two calls are duplicated in each test.
This PR implements eth/69. This protocol version drops the bloom filter
from receipts messages, reducing the amount of data needed for a sync
by ~530GB (2.3B txs * 256 byte) uncompressed. Compressed this will
be reduced to ~100GB
The new version also changes the Status message and introduces the
BlockRangeUpdate message to relay information about the available history
range.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
In this pull request, snapshot generation in pathdb has been ported from
the legacy state snapshot implementation. Additionally, when running in
path mode, legacy state snapshot data is now managed by the pathdb
based snapshot logic.
Note: Existing snapshot data will be re-generated, regardless of whether
it was previously fully constructed.
This adds a geth subcommand for downloading era1 files and placing them into
the correct location. The tool can be used even while geth is already running
on the datadir. Downloads are checked against a hard-coded list of checksums
for mainnet and sepolia.
```
./geth download-era --server $SERVER --block 333333
./geth download-era --server $SERVER --block 333333-444444
./geth download-era --server $SERVER --epoch 0-10
./geth download-era --server $SERVER --all
```
The implementation reuses the file downloader we already had for
fetching build tools. I've done some refactoring on it to make sure it
can support the new use case, and there are some changes to the build
here as well.
Adding values to the witness introduces a new class of issues for
computing gas: if there is not enough gas to cover adding an item to the
witness, then the item should not be added to the witness.
The problem happens when several items are added together, and that
process runs out of gas. The witness gas computation needs a way to
signal that not enough gas was provided. These values can not be
hardcoded, however, as they are context dependent, i.e. two calls to the
same function with the same parameters can give two different results.
The approach is to return both the gas that was actually consumed, and
the gas that was necessary. If the values don't match, then a witness
update OOG'd. The caller should then charge the `consumed` value
(remaining gas will be 0) and error out.
Why not return a boolean instead of the wanted value? Because when
several items are touched, we want to distinguish which item lacked gas.
---------
Signed-off-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
This adds support for naming the source iterators of FairMix, like so:
mix.AddSource(enode.WithSourceName("mySource", iter))
The source that produced the latest node is returned by the new NodeSource method.
This PR contains three refactors:
- refactor the latest fork check that we use quite extensively
- refactor the nil checks in NewPayloads
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
I saw in https://github.com/ethereum/go-ethereum/pull/31378 introduced
github.com/crate-crypto/go-eth-kzg to calculate the kzg hash, and
github.com/crate-crypto/go-kzg-4844 was only used in the test files, so
propose to drop it with go-eth-kzg instead
This adds a metric called `chain/mgasps`, which records how many million
gas per second are being used during block insertion.
The value is calculated as `usedGas * 1000 / elapsed`, and it's updated
in the `insertStats.report` method. Also cleaned up the log output to
reuse the same value instead of recalculating it.
Useful for monitoring block processing throughput.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR introduces an allocation-free version of the
Transaction.EffectiveGasTip method to improve performance by reducing
memory allocations.
## Changes
- Added a new `EffectiveGasTipInto` method that accepts a destination
parameter to avoid memory allocations
- Refactored the existing `EffectiveGasTip` method to use the new
allocation-free implementation
- Updated related methods (`EffectiveGasTipValue`, `EffectiveGasTipCmp`,
`EffectiveGasTipIntCmp`) to use the allocation-free approach
- Added tests and benchmarks to verify correctness and measure
performance improvements
## Motivation
In high-transaction-volume environments, the `EffectiveGasTip` method is
called frequently. Reducing memory allocations in this method decreases
garbage collection pressure and improves overall system performance.
## Benchmark Results
As-Is
BenchmarkEffectiveGasTip/Original-10 42089140 27.45 ns/op 8 B/op 1
allocs/op
To-Be
BenchmarkEffectiveGasTip/IntoMethod-10 72353263 16.73 ns/op 0 B/op 0
allocs/op
## Summary of Improvements
- **Performance**: ~39% faster execution (27.45 ns/op → 16.73 ns/op)
- **Memory**: Eliminated all allocations (8 B/op → 0 B/op)
- **Allocation count**: Reduced from 1 to 0 allocations per operation
This optimization follows the same pattern successfully applied to other
methods in the codebase, maintaining API compatibility while improving
performance.
## Safety & Compatibility
This optimization has no side effects or adverse impacts because:
- It maintains functional equivalence as confirmed by comprehensive
tests
- It preserves API compatibility with existing callers
- It follows clear memory ownership patterns with the destination
parameter
- It maintains thread safety by only modifying the caller-provided
destination parameter
This optimization follows the same pattern successfully applied to other
methods in the codebase, providing better performance without
compromising stability or correctness.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
This PR creates a global hasher pool that can be used by all packages.
It also removes a bunch of the package local pools.
It also updates a few locations to use available hashers or the global
hashing pool to reduce allocations all over the codebase.
This change should reduce global allocation count by ~1%
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This pull request enhances the block prefetcher by executing transactions
in parallel to warm the cache alongside the main block processor.
Unlike the original prefetcher, which only executes the next block and
is limited to chain syncing, the new implementation can be applied to any
block. This makes it useful not only during chain sync but also for regular
block insertion after the initial sync.
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This PR fixes an issue that could lead to data corruption.
Writing the state history may fail due to insufficient disk space or
other potential errors. With this change, the entire state insertion
will be aborted instead of silently ignoring the error.
Without this fix, state transitions would continue while the associated
state history is lost. After a restart, the resulting gap would be detected,
making recovery impossible.
This pull request introduces a SyncKeyValue function to the
ethdb.KeyValueStore
interface, providing the ability to forcibly flush all previous writes
to disk.
This functionality is critical for go-ethereum, which internally uses
two independent
database engines: a key-value store (such as Pebble, LevelDB, or
memoryDB for
testing) and a flat-file–based freezer. To ensure write-order
consistency between
these engines, the key-value store must be explicitly synced before
writing to the
freezer and vice versa.
Fixes
- https://github.com/ethereum/go-ethereum/issues/31405
- https://github.com/ethereum/go-ethereum/issues/29819
The function `BacktraceAt` has been removed in #28187 . But the API
end-point `debug_backtraceAt` is not removed from the file
`internal/web3ext/web3ext.go`.
Fixes methods debug_standardTraceBlockToFile
and debug_standardTraceBadBlockToFile which were
outputting empty files.
---------
Co-authored-by: maskpp <maskpp266@gmail.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This change adds a limit for RPC method names to prevent potential abuse
where large method names could lead to large response sizes.
The limit is enforced in:
- handleCall for regular RPC method calls
- handleSubscribe for subscription method calls
Added tests in websocket_test.go to verify the length limit
functionality for both regular method calls and subscriptions.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Issue statement: when user requests eth_simulateV1 to return full
transaction objects, these objects always had an empty `from` field. The
reason is we lose the sender when translation the message into a
types.Transaction which is then later on serialized.
I did think of an alternative but opted to keep with this approach as it
keeps complexity at the edge. The alternative would be to pass down a
signer object to RPCMarshal* methods and define a custom signer which
keeps the senders in its state and doesn't attempt the signature
recovery.
updates the log entries in `core/filtermaps/indexer.go` to remove double
quotes around keys like "first block" and "last block", changing them to
`firstblock` and `lastblock`. This brings them in line with the general
logging style used across the codebase, where log keys are unquoted
single words.
For example, the log:
` INFO [...] "first block"=..., "last block"=...`
Is now rendered as:
` INFO [...] firstblock=..., lastblock=...`
This change improves readability and maintains consistency with logs
such as:
` INFO [...] number=2 sealhash=... uncles=0 txs=0 ...`
No functional behavior is changed — this is purely a formatting cleanup
for better developer experience.
Fixes https://github.com/ethereum/go-ethereum/issues/31732.
This logic was removed in the recent refactoring in the txindexer to
handle history cutoff (#31393). It was first introduced in this PR:
https://github.com/ethereum/go-ethereum/pull/28908.
I have tested it and it works as an alternative to #31745.
This PR packs 3 changes to the flow of fetching txs from the API:
- It caches the indexer tail after each run is over to avoid hitting the
db all the time as was done originally in #28908.
- Changes `backend.GetTransaction`. It doesn't return an error anymore
when tx indexer is in progress. It shifts the responsibility to the
caller to check the progress. The reason is that in most cases we anyway
check the txpool for the tx. If it was indeed a pending tx we can avoid
the indexer progress check.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
`DefaultBlobSchedule` is actually used downstream to calculate blob fees
(e.g.,
[src](601a380e47/op-service/eth/blob.go (L301))),
this PR makes it explicit that these params are for `Ethereum prod`
instead of `test chains`.
This PR fixes an initialization bug that in some cases caused the map
renderer to leave the last, partially rendered map as is and resume
rendering from the next map. At initialization we check whether the
existing rendered maps are consistent with the current chain view and
revert them if necessary. Until now this happened through an ugly hacky
solution, a "limited" chain view that was supposed to trigger a rollback
of some maps in the renderer logic if necessary. This whole setup worked
under assumptions that just weren't true any more. As a result it always
tried to revert the last map but also it did not shorten the indexed
range, only set `headIndexed` to false which indicated to the renderer
logic that the last map is fully populated (which it wasn't).
Now an explicit rollback of any unusable (reorged) maps happens at
startup, which also means that no hacky chain view is necessary, as soon
as the new `FilterMaps` is returned, the indexed range and view are
consistent with each other.
In the first commit an extra check is also added to `writeFinishedMaps`
so that if there is ever again a bug that would result in a gapped index
then it will not break the db with writing the incomplete data. Instead
it will return an indexing error which causes the indexer to revert to
unindexed mode and print an error log instantly. Hopefully this will not
ever happen in the future, but in order to test this safeguard check I
manually triggered the bug with only the first commit enabled, which
caused an indexing error as expected. With the second commit added (the
actual fix) the same operation succeeded without any issues.
Note that the database version is also bumped in this PR in order to
enforce a full reindexing as any existing database might be potentially
broken.
Fixes https://github.com/ethereum/go-ethereum/issues/31729
This PR fixes the out-of-range block number logic of `getBlockLvPointer`
which sometimes caused searches to fail if the head was updated in the
wrong moment. This logic ensures that querying the pointer of a future
block returns the pointer after the last fully indexed block (instead of
failing) and therefore an async range update will not cause the search
to fail. Earier this behaviour only worked when `headIndexed` was true
and `headDelimiter` pointed to the end of the indexed range. Now it also
works for an unfinished index.
This logic is also moved from `FilterMaps.getBlockLvPointer` to
`FilterMapsMatcherBackend.GetBlockLvPointer` because it is only required
by the search anyways. `FilterMaps.getBlockLvPointer` now only returns a
pointer for existing blocks, consistently with how it is used in the
indexer/renderer.
Note that this unhandled case has been present in the code for a long
time but went unnoticed because either one of two previously fixed bugs
did prevent it from being triggered; the incorrectly positive
`tempRange.headIndexed` (fixed in
https://github.com/ethereum/go-ethereum/pull/31680), though caused other
problems, prevented this one from being triggered as with a positive
`headIndexed` no database read was triggered in `getBlockLvPointer`.
Also, the unnecessary `indexLock` in `synced()` (fixed in
https://github.com/ethereum/go-ethereum/pull/31708) usually did prevent
the search seeing the temp range and therefore avoided noticeable
issues.
The functions `rpcRequest` and `batchRpcRequest` call `baseRpcRequest`.
And `resp.Body` will be closed in the function `baseRpcRequest` later by
`t.Cleanup`:
```go
func baseRpcRequest(t *testing.T, url, bodyStr string, extraHeaders ...string) *http.Response {
// ......
t.Cleanup(func() { resp.Body.Close() })
return resp
}
```
Add tests for GetBlockHeaders that verify client does not disconnect when unlikely block numbers are requested, e.g. max uint64.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Since the block hash is not returned for pending blocks, ethclient cannot unmarshal into RPC block. This makes hash optional on rpc block and compute the hash locally for pending blocks to correctly key the tx sender cache.
a82303f4e3/internal/ethapi/api.go (L500-L504)
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
This changes the filtermaps to only pull up the raw receipts, not the
derived receipts which saves a lot of allocations.
During normal execution this will reduce the allocations of the whole
geth node by ~15%.
For PeerDAS, we need to compute cell proofs. Both ckzg and gokzg support
computing these cell proofs.
This PR does the following:
- Update the go-kzg library from "github.com/crate-crypto/go-kzg-4844"
to "github.com/crate-crypto/go-eth-kzg" which will be the new upstream
for go-kzg moving forward
- Update ckzg from v1.0.0 to v2.0.1 and switch to /v2
- Updates the trusted setup to contain the g1 points both in lagrange
and monomial form
- Expose `ComputeCells` to compute the cell proofs
This PR applies the config overrides to the new config as well,
otherwise they will not be applied to defined configs, making
shadowforks impossible.
To test:
```
> ./build/bin/geth --override.prague 123 --dev --datadir /tmp/geth
INFO [04-28|21:20:47.009] - Prague: @123
> ./build/bin/geth --override.prague 321 --dev --datadir /tmp/geth
INFO [04-28|21:23:59.760] - Prague: @321
``
This PR adds checking for an edgecase which theoretically can happen in
the range-prover. Right now, we check that a key does not overwrite a
previous one by checking that the key is increasing. However, if keys
are of different lengths, it is possible to create a key which is
increasing _and_ overwrites the previous key. Example: `0xaabbcc`
followed by `0xaabbccdd`.
This can not happen in go-ethereum, which always uses fixed-size paths
for accounts and storage slot paths in the trie, but it might happen if
the range prover is used without guaranteed fixed-size keys.
This PR also adds some testcases for the errors that are expected.
TruncatePending shows up bright red on our nodes, because it computes
the length of a map multiple times.
I don't know why this is so expensive, but around 20% of our time is
spent on this, which is super weird.
```
//PR: BenchmarkTruncatePending-24 17498 69397 ns/op 32872 B/op 3 allocs/op
//Master: BenchmarkTruncatePending-24 9960 123954 ns/op 32872 B/op 3 allocs/op
```
```
benchmark old ns/op new ns/op delta
BenchmarkTruncatePending-24 123954 69397 -44.01%
benchmark old allocs new allocs delta
BenchmarkTruncatePending-24 3 3 +0.00%
benchmark old bytes new bytes delta
BenchmarkTruncatePending-24 32872 32872 +0.00%
```
This simple PR is a 44% improvement over the old state
```
OUTINE ======================== github.com/ethereum/go-ethereum/core/txpool/legacypool.(*LegacyPool).truncatePending in github.com/ethereum/go-ethereum/core/txpool/legacypool/legacypool.go
1.96s 18.02s (flat, cum) 19.57% of Total
. . 1495:func (pool *LegacyPool) truncatePending() {
. . 1496: pending := uint64(0)
60ms 2.99s 1497: for _, list := range pool.pending {
250ms 5.48s 1498: pending += uint64(list.Len())
. . 1499: }
. . 1500: if pending <= pool.config.GlobalSlots {
. . 1501: return
. . 1502: }
. . 1503:
. . 1504: pendingBeforeCap := pending
. . 1505: // Assemble a spam order to penalize large transactors first
. 510ms 1506: spammers := prque.New[int64, common.Address](nil)
140ms 2.50s 1507: for addr, list := range pool.pending {
. . 1508: // Only evict transactions from high rollers
50ms 5.08s 1509: if uint64(list.Len()) > pool.config.AccountSlots {
. . 1510: spammers.Push(addr, int64(list.Len()))
. . 1511: }
. . 1512: }
. . 1513: // Gradually drop transactions from offenders
. . 1514: offenders := []common.Address{}
```
```go
// Benchmarks the speed of batch transaction insertion in case of multiple accounts.
func BenchmarkTruncatePending(b *testing.B) {
// Generate a batch of transactions to enqueue into the pool
pool, _ := setupPool()
defer pool.Close()
b.ReportAllocs()
batches := make(types.Transactions, 4096+1024+1)
for i := range len(batches) {
key, _ := crypto.GenerateKey()
account := crypto.PubkeyToAddress(key.PublicKey)
pool.currentState.AddBalance(account, uint256.NewInt(1000000), tracing.BalanceChangeUnspecified)
tx := transaction(uint64(0), 100000, key)
batches[i] = tx
}
for _, tx := range batches {
pool.addRemotesSync([]*types.Transaction{tx})
}
b.ResetTimer()
// benchmark truncating the pending
for range b.N {
pool.truncatePending()
}
}
```
This PR fixes a deadlock situation is deleteTailEpoch that might arise
when
range delete is running in iterator based fallback mode (either using
leveldb
database or the hashdb state storage scheme).
In this case a stopCb callback is called periodically that does check
events,
including matcher sync requests, in which case it tries to acquire
indexLock
for read access, while deleteTailEpoch already held it for write access.
This pull request removes the indexLock acquiring in
`FilterMapsMatcherBackend.synced`
as this function is only called in the indexLoop.
Fixes https://github.com/ethereum/go-ethereum/issues/31700
This PR adds the `AuthorizationList` field to the `CallMsg` interface to support `eth_call`
and `eth_estimateGas` of set-code transactions.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR ensures that caching a slice or a slice of slices will never
affect the original version by always cloning a slice fetched from cache
if it is not used in a guaranteed read only way.
This PR changes the chain view update mechanism of the log filter.
Previously the head updates were all wired through the indexer, even in
unindexed mode. This was both a bit weird and also unsafe as the
indexer's chain view was updates asynchronously with some delay, making
some log related tests flaky. Also, the reorg safety of the indexed
search was integrated with unindexed search in a weird way, relying on
`syncRange.ValidBlocks` in the unindexed case too, with a special
condition added to only consider the head of the valid range but not the
tail in the unindexed case.
In this PR the current chain view is directly accessible through the
filter backend and unindexed search is also chain view based, making it
inherently safe. The matcher sync mechanism is now only used for indexed
search as originally intended, removing a few ugly special conditions.
The PR is currently based on top of
https://github.com/ethereum/go-ethereum/pull/31642
Together they fix https://github.com/ethereum/go-ethereum/issues/31518
and replace https://github.com/ethereum/go-ethereum/pull/31542
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
The API `eth_feeHistory` returns
`{"jsonrpc":"2.0","id":1,"error":{"code":-32603,"message":"json:
unsupported value: NaN"}}`, when we query `eth_feeHistory` with a old
block that without a blob, or when the field
`config.blobSchedule.cancun.max` in genesis.config is 0 (that happens
for some projects fork geth but they don't have blob).
So here we specially handle the case when maxBlobGas == 0 to prevent
this issue from happening.
This PR makes `filtermaps.ChainView` thread safe because it is used
concurrently both by the indexer and multiple matcher threads. Even
though it represents an immutable view of the chain, adding a mutex lock
to the `blockHash` function is necessary because it does so by extending
its list of non-canonical hashes if the underlying blockchain is
changed.
The unsafe concurrency did cause a panic once after running the unit
tests for several hours and it could also happen during live operation.
This PR makes the conditions for using a map rendering snapshot stricter
so that whenever a reorg happens, only a snapshot of a common ancestor
block can be used. The issue fixed in
https://github.com/ethereum/go-ethereum/pull/31642 originated from using
a snapshot that wasn't a common ancestor. For example in the following
reorg scenario: `A->B`, then `A->B2`, then `A->B2->C2`, then `A->B->C`
the last reorg triggered a render from snapshot `B` saved earlier. Now
this is possible under certain conditions but extra care is needed, for
example if block `B` crosses a map boundary then it should not be
allowed. With the latest fix the checks are sufficient but I realized I
would just feel safer if we disallowed this rare and risky scenario
altogether and just render from snapshot `A` after the last reorg in the
example above. The performance difference if a few milliseconds and it
occurs rarely (about once a day on Holesky, probably much more rare on
Mainnet).
Note that this PR only makes the snapshot conditions stricter and
`TestIndexerRandomRange` does check that snapshots are still used
whenever it's obviously possible (adding blocks after the current head
without a reorg) so this change can be considered safe. Also I am
running the unit tests and the fuzzer and everything seems to be fine.
This pull request improves error handling for local transaction submissions.
Specifically, if a transaction fails with a temporary error but might be
accepted later, the error will not be returned to the user; instead, the
transaction will be tracked locally for resubmission.
However, if the transaction fails with a permanent error (e.g., invalid
transaction or insufficient balance), the error will be propagated to the user.
These errors returned in the legacyPool are regarded as temporary failure:
- `ErrOutOfOrderTxFromDelegated`
- `txpool.ErrInflightTxLimitReached`
- `ErrAuthorityReserved`
- `txpool.ErrUnderpriced`
- `ErrTxPoolOverflow`
- `ErrFutureReplacePending`
Notably, InsufficientBalance is also treated as a permanent error, as
it’s highly unlikely that users will transfer funds into the sender account
after submitting the transaction. Otherwise, users may be confused—seeing
their transaction submitted but unaware that the sender lacks sufficient funds—and
continue waiting for it to be included.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
closes#31401
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
closes#31310
This has been requested a few times in the past and I think it is a nice
quality-of-life improvement for users. At a predetermined interval,
there will now be a "Fork ready" log when a future fork is scheduled,
but not yet active.
It can only possibly print after block import, which kinda avoids the
scenario where the client isn't progressing or is syncing and the user
thinks it's "ready" because it sees a ready log.
New output:
```console
INFO [03-08|21:32:57.472] Imported new potential chain segment number=7 hash=aa24ee..f09e62 blocks=1 txs=0 mgas=0.000 elapsed="874.916µs" mgasps=0.000 snapdiffs=973.00B triediffs=7.05KiB triedirty=0.00B
INFO [03-08|21:32:57.473] Ready for fork activation fork=Prague date="18 Mar 25 19:29 CET" remaining=237h57m0s timestamp=1,742,322,597
INFO [03-08|21:32:57.475] Chain head was updated number=7 hash=aa24ee..f09e62 root=19b0de..8d32f2 elapsed="129.125µs"
```
Easiest way to verify this behavior is to apply this patch and run `geth
--dev --dev.period=12`
```patch
diff --git a/params/config.go b/params/config.go
index 9c7719d901..030c4f80e7 100644
--- a/params/config.go
+++ b/params/config.go
@@ -174,7 +174,7 @@ var (
ShanghaiTime: newUint64(0),
CancunTime: newUint64(0),
TerminalTotalDifficulty: big.NewInt(0),
- PragueTime: newUint64(0),
+ PragueTime: newUint64(uint64(time.Now().Add(time.Hour * 300).Unix())),
BlobScheduleConfig: &BlobScheduleConfig{
Cancun: DefaultCancunBlobConfig,
Prague: DefaultPragueBlobConfig,
```
BroadcastTransactions needs the Sender address to route message flows
from the same Sender address consistently to the same random subset of
peers. It however spent considerable time calculating the Sender
addresses, even if the Sender address was already calculated and cached
in other parts of the code.
Since we only need the mapping, we can use any signer, and the one that
had already been used is a better choice because of cache reuse.
This is an attempt at fixing #31601. I think what happens is the startup
logic will try to get the full block body (it's `bc.loadLastState`) and
fail because genesis block has been pruned from the freezer. This will
cause it to keep repeating the reset logic, causing a deadlock.
This can happen when due to an unsuccessful sync we don't have the state
for the head (or any other state) fully, and try to redo the snap sync.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This fixes an issue where running geth with `--history.chain postmerge`
would not work on an empty database.
```
ERROR[04-16|23:11:12.913] Chain history database is pruned to unknown block tail=0
Fatal: Failed to register the Ethereum service: unexpected database tail
```
This PR fixes a bug in the map renderer that sometimes used an obsolete
block log value pointer to initialize the iterator for rendering from a
snapshot. This bug was triggered by chain reorgs and sometimes caused
indexing errors and invalid search results. A few other conditions are
also made safer that were not reported to cause issues yet but could
potentially be unsafe in some corner cases. A new unit test is also
added that reproduced the bug but passes with the new fixes.
Fixes https://github.com/ethereum/go-ethereum/issues/31593
Might also fix https://github.com/ethereum/go-ethereum/issues/31589
though this issue has not been reproduced yet, but it appears to be
related to a log index database corruption around a specific block,
similarly to the other issue.
Note that running this branch resets and regenerates the log index
database. For this purpose a `Version` field has been added to
`rawdb.FilterMapsRange` which will also make this easier in the future
if a breaking database change is needed or the existing one is
considered potentially broken due to a bug, like in this case.
Our metrics related to dial errors were off. The original error was not
wrapped, so the caller function had no chance of picking it up.
Therefore the most common error, which is "TooManyPeers", was not
correctly counted.
The metrics were originally introduced in
https://github.com/ethereum/go-ethereum/pull/27621
I was thinking of various possible solutions.
- the one proposed here wraps both the new error and the origial error.
It is not a pattern we use in other parts of the code, but works. This
is maybe the smallest possible change.
- as an alternate, I could write a proper `errProtoHandshakeError` with
it's own wrapped error
- finally, I'm not even sure we need `errProtoHandshakeError`, maybe we
could just pass up the original error.
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
Thank you, @holiman, for being an integral part of the Go-Ethereum
and for your invaluable contributions over the years.
This will always be your home and you're welcome back anytime!
I added the history mode configuration in eth/ethconfig initially, since
it seemed like the logical place. But it turns out we need access to the
intended pruning setting at a deeper level, and it actually needs to be
integrated with the blockchain startup procedure.
With this change applied, if a node previously had its history pruned,
and is subsequently restarted **without** the `--history.chain
postmerge` flag, the `BlockChain` initialization code will now verify
the freezer tail against the known pruning point of the predefined
network and will restore pruning status. Note that this logic is quite
restrictive, we allow non-zero tail only for known networks, and only
for the specific pruning point that is defined.
As of now, Geth disconnects peers only on protocol error or timeout,
meaning once connection slots are filled, the peerset is largely fixed.
As mentioned in https://github.com/ethereum/go-ethereum/issues/31321,
Geth should occasionally disconnect peers to ensure some churn.
What/when to disconnect could depend on:
- the state of geth (e.g. sync or not)
- current number of peers
- peer level metrics
This PR adds a very slow churn using a random drop.
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
Our previous success metrics gave success even if a peer disconnected
right after connection. These metrics only count peers that stayed
connected for at least 1 min. The 1 min limit is an arbitrary choice. We do
not use this for decision logic, only statistics.
When we instantiate a sub-logger via
`go-ethereum/internal/testlog/logger.With`, we copy the reference to the
`bufHandler` from the parent logger. However, internally,
`go-ethereum/internal/testlog/logger.With` calls `log/slog/Logger.With`
which creates a new handler instance (via
`internal/bufHandler.WithAttrs`).
This PR modifies sub-logger instantiation to use the newly-instantiated
handler, instead of copying the reference from the parent instance. The
type cast from `slog.Handler` to `*bufHandler` in
`internal/testlog/Logger.With` is safe here because a
`internal/testlog/Logger` can only be instantiated with a `*bufHandler`
as the underlying handler type.
Note, that I've also removed a pre-existing method that broke the above
assumption. However, this method is not used in our codebase.
I'm not sure if the assumption holds for forks of geth (e.g. optimism
has modified the testlogger somewhat allowing test loggers to accept
arbitrary handler types), but it seems okay to break API compatibility
given that this is in the `internal` package.
closes https://github.com/ethereum/go-ethereum/issues/31533
before this changes, this will result in numerous test failures:
```
> go test -run=Eth2AssembleBlock -c
> stress ./catalyst.test
```
The reason is that after creating/inserting the test chain, there is a
race between the txpool head reset and the promotion of txs added from
tests.
Ensuring that the txpool state is up to date with the head of the chain
before proceeding fixes these flaky tests.
This fix allows Trezor to support full 32bit chainId in geth, with the
next version of firmware.
For `chainId > 2147483630` case, Trezor returns signature bit only.
- Trezor returns only signature parity for `chainId > 2147483630` case.
- for `chainId == 2147483630` case, Trezor returns `MAX_UINT32` or `0`,
but it doesn't matter.
(`2147483630 * 2 + 35` = `4294967295`(`MAX_UINT32`))
chainId | returned signature_v | compatible issue
---------|------------------------|--------------------
0 < chainId <= 255 | chainId * 2 + 35 + v | no issue (firmware `1.6.2`
for Trezor one)
255 < chainId <= 2147483630 | chainId * 2 + 35 + v | ***fixed.***
*firmware `1.6.3`*
chainId > 2147483630 | v | *firmware `1.6.3`*
Please see also: full 32bit chainId support for Trezor
- Trezor one: https://github.com/trezor/trezor-mcu/pull/399 ***merged***
- Trezor model T: https://github.com/trezor/trezor-core/pull/311
***merged***
---------
Signed-off-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
Fixes#31169
The TestTransactionForgotten test was flaky due to real time
dependencies. This PR:
- Replaces real time with mock clock for deterministic timing control
- Adds precise state checks at timeout boundaries
- Verifies underpriced cache states and cleanup
- Improves test reliability by controlling transaction timestamps
- Adds checks for transaction re-enqueueing behavior
The changes ensure consistent test behavior without timing-related
flakiness.
---------
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
This PR proposes a change to the authorizations' validation introduced
in commit cdb66c8. These changes make the expected behavior independent
of the order of admission of authorizations, improving the
predictability of the resulting state and the usability of the system
with it.
The current implementation behavior is dependent on the transaction
submission order: This issue is related to authorities and the sender of
a transaction, and can be reproduced respecting the normal nonce rules.
The issue can be reproduced by the two following cases:
**First case**
- Given an empty pool.
- Submit transaction `{ from: B, auths [ A ] }`: is accepted.
- Submit transaction `{ from: A }`: Is accepted: it becomes the one
in-flight transaction allowed.
**Second case**
- Given an empty pool.
- Submit transaction `{ from: A }`: is accepted
- Submit transaction `{ from: B, auths [ A ] }`: is rejected since there
is already a queued/pending transaction from A.
The expected behavior is that both sequences of events would lead to the
same sets of accepted and rejected transactions.
**Proposed changes**
The queued/pending transactions issued from any authority of the
transaction being validated have to be counted, allowing one transaction
from accounts submitting an authorization.
- Notice that the expected behavior was explicitly forbidden in the case
"reject-delegation-from-pending-account", I believe that this behavior
conflicts to the definition of the limitation, and it is removed in this
PR. The expected behavior is tested in
"accept-authorization-from-sender-of-one-inflight-tx".
- Replacement tests have been separated to improve readability of the
acceptance test.
- The test "allow-more-than-one-tx-from-replaced-authority" has been
extended with one extra transaction, since the system would always have
accepted one transaction (but not two).
- The test "accept-one-inflight-tx-of-delegated-account" is extended to
clean-up state, avoiding leaking the delegation used into the other
tests. Additionally, replacement check is removed to be tested in its
own test case.
**Expected behavior**
The expected behavior of the authorizations' validation shall be as
follows:
Notice that replacement shall be allowed, and behavior shall remain
coherent with the table, according to the replaced transaction.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Make UPnP more robust
- Once a random port was mapped, we try to stick to it even if a UPnP
refresh fails. Previously we were immediately moving back to try the
default port, leading to frequent ENR changes.
- We were deleting port mappings before refresh as a possible
workaround. This created issues in some UPnP servers. The UPnP (and PMP)
specification is explicit about the refresh requirements, and delete is
clearly not needed (see
https://github.com/ethereum/go-ethereum/pull/30265#issuecomment-2766987859).
From now on we only delete when closing.
- We were trying to add port mappings only once, and then moved on to
random ports. Now we insist a bit more, so that a simple failed request
won't lead to ENR changes.
Fixes https://github.com/ethereum/go-ethereum/issues/31418
---------
Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
During my benchmarks on Holesky, around 10% of all CPU time was spent in
PUSH2
```
ROUTINE ======================== github.com/ethereum/go-ethereum/core/vm.newFrontierInstructionSet.makePush.func1 in github.com/ethereum/go-ethereum/core/vm/instructions.go
16.38s 20.35s (flat, cum) 10.31% of Total
740ms 740ms 976: return func(pc *uint64, interpreter *EVMInterpreter, scope *ScopeContext) ([]byte, error) {
. . 977: var (
40ms 40ms 978: codeLen = len(scope.Contract.Code)
970ms 970ms 979: start = min(codeLen, int(*pc+1))
200ms 200ms 980: end = min(codeLen, start+pushByteSize)
. . 981: )
670ms 2.39s 982: a := new(uint256.Int).SetBytes(scope.Contract.Code[start:end])
. . 983:
. . 984: // Missing bytes: pushByteSize - len(pushData)
410ms 410ms 985: if missing := pushByteSize - (end - start); missing > 0 {
. . 986: a.Lsh(a, uint(8*missing))
. . 987: }
12.69s 14.94s 988: scope.Stack.push2(*a)
10ms 10ms 989: *pc += size
650ms 650ms 990: return nil, nil
. . 991: }
. . 992:}
```
Which is quite crazy. We have a handwritten encoder for PUSH1 already,
this PR adds one for PUSH2.
PUSH2 is the second most used opcode as shown here:
https://gist.github.com/shemnon/fb9b292a103abb02d98d64df6fbd35c8 since
it is used by solidity quite significantly. Its used ~20 times as much
as PUSH20 and PUSH32.
# Benchmarks
```
BenchmarkPush/makePush-14 94196547 12.27 ns/op 0 B/op 0 allocs/op
BenchmarkPush/push-14 429976924 2.829 ns/op 0 B/op 0 allocs/op
```
---------
Co-authored-by: jwasinger <j-wasinger@hotmail.com>
This pull request introduces two constraints in the blobPool:
(a) If the sender has a pending authorization or delegation, only one
in-flight
executable transaction can be cached.
(b) If the authority address in a SetCode transaction is already
reserved by
the blobPool, the transaction will be rejected.
These constraints mitigate an attack where an attacker spams the pool
with
numerous blob transactions, evicts other transactions, and then cancels
all
pending blob transactions by draining the sender’s funds if they have a
delegation.
Note, because there is no exclusive lock held between different subpools
when processing transactions, it's totally possible the SetCode
transaction
and blob transactions with conflict sender and authorities are accepted
simultaneously. I think it's acceptable as it's very hard to be
exploited.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
This PR improves error handling in the remotedb package by fixing two
issues:
1. In the `Has` method, we now properly propagate errors instead of
silently returning false. This makes the behavior more predictable and
helps clients better understand when there are connection issues.
2. In the `New` constructor, we add a nil check for the client parameter
to prevent potential panics. This follows Go best practices for
constructor functions.
These changes make the code more robust and follow Go's error handling
idioms without requiring any changes to other parts of the codebase.
Changes:
- Modified `Has` method to return errors instead of silently returning
false
- Added nil check in `New` constructor
- Fixed field name in constructor to match struct definition
Co-authored-by: lightclient <lightclient@protonmail.com>
Add GetHeaderByNumber and GetReceiptsByNumber to allow more efficient API request filling from Era files.
Here we are modifying the port mapping logic so that existing port
mappings will only be removed when they were previously created by geth.
The AddAnyPortMapping functionality has been adapted to work consistently
between the IGDv1 and IGDv2 backends.
This PR adds a new `--beacon.checkpoint.file` config flag to geth and
blsync which specifies a checkpoint import/export file. If a file with
an existing checkpoint is specified, it is used for initialization
instead of the hardcoded one (except when `--beacon.checkpoint` is also
specified simultaneously). Whenever the client encounters a new valid
finality update with a suitable finalized beacon block root at an epoch
boundary, it saves the block root in hex format to the checkpoint file.
This adds the test description text to the output, instead of keeping it
as a Go comment. Logs are visible in the hive UI where these tests run,
while Go comments are not.
This pull request introduces new sync logic for pruning mode. The downloader will now skip
insertion of block bodies and receipts before the configured history cutoff point.
Originally, in snap sync, the header chain and other components (bodies and receipts) were
inserted separately. However, in Proof-of-Stake, this separation is unnecessary since the
sync target is already verified by the CL.
To simplify the process, this pull request modifies `InsertReceiptChain` to insert headers
along with block bodies and receipts together. Besides, `InsertReceiptChain` doesn't have
the notion of reorg, as the common ancestor is always be found before the sync and extra
side chain is truncated at the beginning if they fall in the ancient store. The stale
canonical chain flags will always be rewritten by the new chain. Explicit reorg logic is
no longer required in `InsertReceiptChain`.
This is for the implementation of Portal Network in the Shisui client.
Their handler needs access to the node object in order to send further
calls to the requesting node. This is a breaking API change but it
should be fine, since there are basically no known users of TALKREQ
outside of Portal network.
---------
Signed-off-by: thinkAfCod <q315xia@163.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
When resending the WHOAREYOU packet, a new nonce and random IV should not
be generated. The sent packet needs to match the previously-sent one exactly
in order to make the handshake retry work.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This is an alternative to #31309
With eth/68, transaction announcement must have transaction type and
size. So in announceTransactions, we need to query the transaction from
transaction pool with its hash. This creates overhead in case of blob
transaction which needs to load data from billy and RLP decode. This
commit creates a lightweight lookup from transaction hash to transaction
size and a function GetMetadata to query transaction type and
transaction size given the transaction hash.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR refactors the `nodeSet` structure in the path database to use
separate maps for account and storage trie nodes, resulting in
performance improvements. The change maintains the same API while
optimizing the internal data structure.
It introduces a new variable to store the external port returned by the
addAnyPortMapping function and ensures that the correct external port is
returned even in case of an error.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR adds `rawdb.SafeDeleteRange` and uses it for range deletion in
`core/filtermaps`. This includes deleting the old bloombits database,
resetting the log index database and removing index data for unindexed
tail epochs (which previously weren't properly implemented for the
fallback case).
`SafeDeleteRange` either calls `ethdb.DeleteRange` if the node uses the
new path based state scheme or uses an iterator based fallback method
that safely skips trie nodes in the range if the old hash based state
scheme is used. Note that `ethdb.DeleteRange` also has its own iterator
based fallback implementation in `ethdb/leveldb`. If a path based state
scheme is used and the backing db is pebble (as it is on the majority of
new nodes) then `rawdb.SafeDeleteRange` uses the fast native range
delete.
Also note that `rawdb.SafeDeleteRange` has different semantics from
`ethdb.DeleteRange`, it does not automatically return if the operation
takes a long time. Instead it receives a `stopCallback` that can
interrupt the process if necessary. This is because in the safe mode
potentially a lot of entries are iterated without being deleted (this is
definitely the case when deleting the old bloombits database which has a
single byte prefix) and therefore restarting the process every time a
fixed number of entries have been iterated would result in a quadratic
run time in the number of skipped entries.
When running in safe mode, unindexing an epoch takes about a second,
removing bloombits takes around 10s while resetting a full log index
might take a few minutes. If a range delete operation takes a
significant amount of time then log messages are printed. Also, any
range delete operation can be interrupted by shutdown (tail uinindexing
can also be interrupted by head indexing, similarly to how tail indexing
works). If the last unindexed epoch might have "dirty" index data left
then the indexed map range points to the first valid epoch and
`cleanedEpochsBefore` points to the previous, potentially dirty one. At
startup it is always assumed that the epoch before the first fully
indexed one might be dirty. New tail maps are never rendered and also no
further maps are unindexed before the previous unindexing is properly
cleaned up.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR changes log indexer error handling so that if an indexing error
happens then it disables the indexer and reverts to unindexed more
without resetting the database (except in case of a failed database
init).
Resetting the database on the first error would probably be overkill as
a client update might fix this without having to reindex the entire
history. It would also make debugging very hard. On the other hand,
these errors do not resolve themselves automatically so constantly
retrying makes no sense either. With these changes a new attempt to
resume indexing is made every time the client is restarted.
The PR also fixes https://github.com/ethereum/go-ethereum/issues/31491
which originated from the tail indexer trying to resume processing a
failed map renderer.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Add support for state overrides in eth_createAccessList. This will make the method consistent
with other execution methods.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This pull request removes the node copy operation to reduce memory
allocation. Key Changes as below:
**(a) Use `decodeNodeUnsafe` for decoding nodes retrieved from the trie
node reader**
In the current implementation of the MPT, once a trie node blob is
retrieved, it is passed to `decodeNode` for decoding. However,
`decodeNode` assumes the supplied byte slice might be mutated later, so
it performs a deep copy internally before parsing the node.
Given that the node reader is implemented by the path database and the
hash database, both of which guarantee the immutability of the returned
byte slice. By restricting the node reader interface to explicitly
guarantee that the returned byte slice will not be modified, we can
safely replace `decodeNode` with `decodeNodeUnsafe`. This eliminates the
need for a redundant byte copy during each node resolution.
**(b) Modify the trie in place**
In the current implementation of the MPT, a copy of a trie node is
created before any modifications are made. These modifications include:
- Node resolution: Converting the value from a hash to the actual node.
- Node hashing: Tagging the hash into its cache.
- Node commit: Replacing the children with its hash.
- Structural changes: For example, adding a new child to a fullNode or
replacing a child of a shortNode.
This mechanism ensures that modifications only affect the live tree,
leaving all previously created copies unaffected.
Unfortunately, this property leads to a huge memory allocation
requirement. For example, if we want to modify the fullNode for n times,
the node will be copied for n times.
In this pull request, all the trie modifications are made in place. In
order to make sure all previously created copies are unaffected, the
`Copy` function now will deep-copy all the live nodes rather than the
root node itself.
With this change, while the `Copy` function becomes more expensive, it's
totally acceptable as it's not a frequently used one. For the normal
trie operations (Get, GetNode, Hash, Commit, Insert, Delete), the node
copy is not required anymore.
This PR adds an extra condition to the log indexer initialization in
order to avoid initializing with block 0 as target head. Previously this
caused the indexer to initialize without a checkpoint. Later, when the
real chain head was set, it indexed the entire history, then unindexed
most of it if only the recent history was supposed to be indexed. Now
the init only happens when there is an actual synced chain head and
therefore the index is initialized at the most recent checkpoint and
only the last year is indexed according to the default parameters.
During checkpoint initialization the best available checkpoint is also
checked against the history cutoff point and fails if the indexing would
have to start from a block older than the cutoff. If initialization
fails then the indexer reverts to unindexed mode instead of retrying
because the the failure conditions cannot be expected to recover later.
Instead of reporting all filtermaps stuff in one line, I'm breaking it
down into the three separate kinds of entries here.
```
+-----------------------+-----------------------------+------------+------------+
| DATABASE | CATEGORY | SIZE | ITEMS |
+-----------------------+-----------------------------+------------+------------+
| Key-Value store | Log index filter-map rows | 59.21 GiB | 616077345 |
| Key-Value store | Log index last-block-of-map | 12.35 MiB | 269755 |
| Key-Value store | Log index block-lv | 421.70 MiB | 22109169 |
```
Also added some other changes to make it easier to debug:
- restored bloombits into the inspect output, so we notice if it doesn't
get deleted for some reason
- tracking of unaccounted key examples
This adds a new subcommand 'geth prune-history' that removes the pre-merge history
on supported networks. Geth is not fully ready to work in this mode, please do not run
this command on your production node.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
In #31384 we unindex TXes prior to the merge block. However when the
node starts up it will try to re-index those back if the config is to index the
whole chain. This change makes the indexer aware of the history cutoff block,
avoiding reindexing in that segment.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This pull request improves the protection mechanism in the txpool for
senders with delegation. A sender with either delegation or pending
delegation is now limited to a maximum of one in-flight executable
transaction, while gapped transactions will be rejected.
Reason:
If nonce-gapped transaction from delegated/pending-delegated senders
can be acceptable, then it's no-longer possible to send another
"executable" transaction with correct nonce due to the policy of at most
one inflight tx. The gapped transaction will be stuck in the txpool, with no
meaningful way to unlock the sender.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
This fixes the handshake in a scenario where the remote end sends two unknown
packets in a row. When this happens, we would previously respond to both with
a WHOAREYOU challenge, but keep only the latest sent challenge. Transmission is
assumed to be unreliable, so any client that sends two request packets simultaneously
has to be prepared to follow up on whichever request leads to a handshake. With
this fix, we force them to do the handshake that we can actually complete.
Fixes#30581
This PR changes the matcher syncing conditions so that it is possible to
run a search while head indexing is in progress. Previously it was a
requirement to have the head indexed in order to perform matcher sync
before and after a search. This was unnecessarily strict as the purpose
was just to avoid syncing the valid range with the temporary shortened
indexed range applied while updating existing head maps. Now the sync
condition explicitly checks whether the indexer has a temporary indexed
range with some head maps being partially updated.
It also fixes a deadlock that happened when matcher synchronization was
attempted in the event handler called from the `writeFinishedMaps`
periodical callback.
This pull request fixes a broken unit test
```
=== CONT TestTracingWithOverrides
api_test.go:1012: result: {"gas":21167,"failed":false,"returnValue":"0x0000000000000000000000000000000000000000000000000000000000000002","structLogs":[{"pc":0,"op":"PUSH1","gas":24978860,"gasCost":3,"depth":1,"stack":[]},{"pc":2,"op":"CALLDATALOAD","gas":24978857,"gasCost":3,"depth":1,"stack":["0x0"]},{"pc":3,"op":"PUSH1","gas":24978854,"gasCost":3,"depth":1,"stack":["0x1"]},{"pc":5,"op":"ADD","gas":24978851,"gasCost":3,"depth":1,"stack":["0x1","0x1"]},{"pc":6,"op":"PUSH1","gas":24978848,"gasCost":3,"depth":1,"stack":["0x2"]},{"pc":8,"op":"MSTORE","gas":24978845,"gasCost":6,"depth":1,"stack":["0x2","0x0"]},{"pc":9,"op":"PUSH1","gas":24978839,"gasCost":3,"depth":1,"stack":[]},{"pc":11,"op":"PUSH1","gas":24978836,"gasCost":3,"depth":1,"stack":["0x20"]},{"pc":13,"op":"RETURN","gas":24978833,"gasCost":0,"depth":1,"stack":["0x20","0x0"]}]}
api_test.go:1013: test 10, result mismatch, have
{21167 false 0x0000000000000000000000000000000000000000000000000000000000000002}
, want
{21167 false 0000000000000000000000000000000000000000000000000000000000000002}
api_test.go:1012: result: {"gas":25664,"failed":false,"returnValue":"0x000000000000000000000000c6e93f4c1920eaeaa1e699f76a7a8c18e3056074","structLogs":[]}
api_test.go:1013: test 11, result mismatch, have
{25664 false 0x000000000000000000000000c6e93f4c1920eaeaa1e699f76a7a8c18e3056074}
, want
{25664 false 000000000000000000000000c6e93f4c1920eaeaa1e699f76a7a8c18e3056074}
```
This is a **breaking change** to the opcode tracer. The top-level
`returnValue` field of a trace will be now hex-encoded. If the return
data is empty, this field will contain "0x".
Fixes#31196
This PR fixes the broken request error handling of the workload filter
tests. Until now `validateHistoryPruneErr` was invoked with `fq.Err` as
an input which was always nil and a timeout or http error was reported
as a result content mismatch.
Also, in case of `errPrunedHistory` it is wrong to return here without
setting an error because then it will look like a valid empty result and
the check will later fail. So instead `errPrunedHistory` is always
returned now (without printing an error message) and the callers of
`run` should handle this special case (typically ignore silently).
This removes the signer type-train in favor of defining a single object
that can handle all tx types. Supported types are enabled via a map.
Notably, the new signer also supports disabling legacy transactions.
This PR roughly halves the number of allocations needed to compute the
sigHash for a transaction.
This sigHash is used whenever we recover a signature of a transaction,
so quite often. During a recent benchmark full syncing on Holesky,
roughly 2.8% of all allocations were happening here because the fields
from the transaction would be copied multiple times.
```
66168733 153175654 (flat, cum) 2.80% of Total
. . 368:func (s londonSigner) Hash(tx *Transaction) common.Hash {
. . 369: if tx.Type() != DynamicFeeTxType {
. . 370: return s.eip2930Signer.Hash(tx)
. . 371: }
. 19169966 372: return prefixedRlpHash(
. . 373: tx.Type(),
26442187 26442187 374: []interface{}{
. . 375: s.chainId,
6848616 6848616 376: tx.Nonce(),
. 19694077 377: tx.GasTipCap(),
. 18956774 378: tx.GasFeeCap(),
6357089 6357089 379: tx.Gas(),
. 12321050 380: tx.To(),
. 16865054 381: tx.Value(),
13435187 13435187 382: tx.Data(),
13085654 13085654 383: tx.AccessList(),
. . 384: })
. . 385:}
```
This PR reduces the allocations and speeds up the computation of the
sigHash by ~22%, which is quite significantly given that this operation
involves a call to Keccak
```
// BenchmarkHash-8 440082 2639 ns/op 384 B/op 13 allocs/op
// BenchmarkHash-8 493566 2033 ns/op 240 B/op 6 allocs/op
```
```
Hash-8 2.691µ ± 8% 2.097µ ± 9% -22.07% (p=0.000 n=10)
```
It also kinda cleans up stuff in my opinion, since the transaction
should itself know best how to compute the sighash
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Currently, when answering GetPooledTransaction request, txpool.Get() is
used. When the requested hash is blob transaction, blobpool.Get() is
called. This function loads the RLP-encoded transaction from limbo then
decodes and returns. Later, in answerGetPooledTransactions, we need to
RLP encode again. This decode then encode is wasteful. This commit adds
GetRLP to transaction pool interface so that answerGetPooledTransactions
can use the RLP-encoded from limbo directly.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
The main use case I see of this is that it allows users to estimate gas
against the same state that they query for their nonce, and the same
state they base the data of their transaction against. This helps ensure
that gas estimation won't fail and the transaction won't revert on-chain
because of a mismatch between the state used for gas estimation and the
state used to generate the inputs to gas estimation or the transaction's
nonce when submitted to the mempool.
This PR also updates the EstimateGas comment based on the new geth
`eth_estimateGas` default of using latest state as of v1.12.0:
https://github.com/ethereum/go-ethereum/pull/24363
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
When I'm running `geth import --metrics`, the metrics is different to
normal `geth --metrics`, so the grafana dashboard needs to be updated,
eg: `eth_db_chaindata_disk_read` vs `disk_read`.
So I think we should always set the name to `eth/db/chaindata` for more
convenient.
---------
Signed-off-by: jsvisa <delweng@gmail.com>
This PR fixes a bug in the `lastMapBoundaryBefore` logic that resulted
in incorrect checkpoint initialization (started rendering from the
previous epoch boundary which caused the `needTailEpoch` check to fail).
Apparently the bug was present before but went unnoticed because
`needTailEpoch` behaved differently.
Fixes https://github.com/ethereum/go-ethereum/issues/31413
Here we add the notion of prunable tables for the `TruncateTail` operation
in the freezer. TruncateTail for the chain freezer now only truncates the body and
receipts tables, leaving headers and hashes as-is.
This change also requires changing the validation/repair at startup to allow for
tables with different tail. For the header and hash tables, we now require them to start
at number zero.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR implements a new version of the abigen utility (v2) which exists
along with the pre-existing v1 version.
Abigen is a utility command provided by go-ethereum that, given a
solidity contract ABI definition, will generate Go code to transact/call
the contract methods, converting the method parameters/results and
structures defined in the contract into corresponding Go types. This is
useful for preventing the need to write custom boilerplate code for
contract interactions.
Methods in the generated bindings perform encoding between Go types and
Solidity ABI-encoded packed bytecode, as well as some action (e.g.
`eth_call` or creating and submitting a transaction). This limits the
flexibility of how the generated bindings can be used, and prevents
easily adding new functionality, as it will make the generated bindings
larger for each feature added.
Abigen v2 was conceived of by the observation that the only
functionality that generated Go bindings ought to perform is conversion
between Go types and ABI-encoded packed data. Go-ethereum already
provides various APIs which in conjunction with conversion methods
generated in v2 bindings can cover all functionality currently provided
by v1, and facilitate all other previously-desired use-cases.
## Generating Bindings
To generate contract bindings using abigen v2, invoke the `abigen`
command with the `--v2` flag. The functionality of all other flags is
preserved between the v2 and v1 versions.
## What is Generated in the Bindings
The execution of `abigen --v2` generates Go code containing methods
which convert between Go types and corresponding ABI-encoded data
expected by the contract. For each input-accepting contract method and
the constructor, a "packing" method is generated in the binding which
converts from Go types to the corresponding packed solidity expected by
the contract. If a method returns output, an "unpacking" method is
generated to convert this output from ABI-encoded data to the
corresponding Go types.
For contracts which emit events, an unpacking method is defined for each
event to unpack the corresponding raw log to the Go type that it
represents.
Likewise, where custom errors are defined by contracts, an unpack method
is generated to unpack raw error data into a Go type.
## Using the Generated Bindings
For a smooth user-experience, abigen v2 comes with a number of utility
functions to be used in conjunction with the generated bindings for
performing common contract interaction use-cases. These include:
* filtering for historical logs of a given topic
* watching the chain for emission of logs with a given topic
* contract deployment methods
* Call/Transact methods
https://geth.ethereum.org will be updated to include a new tutorial page
for abigen v2 with full code examples. The page currently exists in a
PR: https://github.com/ethereum/go-ethereum/pull/31390 .
There are also extensive examples of interactions with contract bindings
in [test
cases](cc855c7ede/accounts/abi/bind/v2/lib_test.go)
provided with this PR.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
this adds 2 features to improve `geth --dev` experience.
1. we don't need to use `dev_SetFeeRecipient` to set initial coinbase
address. it was a pain.
2. we don't need to unlock keystore if we don't use it. we had it
because of clique.
Bumps [golang.org/x/net](https://github.com/golang/net) from 0.34.0 to
0.36.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="85d1d54551"><code>85d1d54</code></a>
go.mod: update golang.org/x dependencies</li>
<li><a
href="cde1dda944"><code>cde1dda</code></a>
proxy, http/httpproxy: do not mismatch IPv6 zone ids against hosts</li>
<li><a
href="fe7f0391aa"><code>fe7f039</code></a>
publicsuffix: spruce up code gen and speed up PublicSuffix</li>
<li><a
href="459513d1f8"><code>459513d</code></a>
internal/http3: move more common stream processing to genericConn</li>
<li><a
href="aad0180cad"><code>aad0180</code></a>
http2: fix flakiness from t.Log when GOOS=js</li>
<li><a
href="b73e5746f6"><code>b73e574</code></a>
http2: don't log expected errors from writing invalid trailers</li>
<li><a
href="5f45c776a9"><code>5f45c77</code></a>
internal/http3: make read-data tests usable for server handlers</li>
<li><a
href="43c2540165"><code>43c2540</code></a>
http2, internal/httpcommon: reject userinfo in :authority</li>
<li><a
href="1d78a08500"><code>1d78a08</code></a>
http2, internal/httpcommon: factor out server header logic for
h2/h3</li>
<li><a
href="0d7dc54a59"><code>0d7dc54</code></a>
quic: add Conn.ConnectionState</li>
<li>Additional commits viewable in <a
href="https://github.com/golang/net/compare/v0.34.0...v0.36.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
You can disable automated security fix PRs for this repo from the
[Security Alerts
page](https://github.com/ethereum/go-ethereum/network/alerts).
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
This pull request enhances the unit test, avoiding unnecessary failure
in CI.
```
--- FAIL: TestSimulatedBeaconSendWithdrawals (12.08s)
simulated_beacon_test.go:139: timed out without including all withdrawals/txs
FAIL
```
Fixes `evm statetest` for state test fixtures with multiple fork entries
in their `post` field (e.g.,
[chainId.json](81862e4848/GeneralStateTests/stChainId/chainId.json (L39))).
When these re-activated flags aren't exposed, `statetest` only executes
the fixture for a single fork entry instead of all of the forks as
expected.
This only affects ethereum/tests state test fixtures, not
ethereum/execution-spec-tests (EEST) state tests. EEST writes a separate
fixture/test case (i.e. a separate top-level dict entry in the .json)
for each fork configuration as apposed to combining multiple forks in
one fixture test case: New EEST state tests targeting Prague behavior
are not affected.
Currently, even though it takes in a `Logger` interface,
`log.SetDefualt` enforces that the concrete type of the provided logger
is `*logger` because:
1. in `init` `root.Store` is called with a `*logger`
2. `atomic.Value` panics if the concrete type provided in `Store` is not
consistent across calls.
([ref](https://pkg.go.dev/sync/atomic#Value.Store))
> All calls to Store for a given Value must use values of the same
concrete type.
This PR changes to use `sync.RWMutex` and adds a test that panics on
`master`.
Fixes#31093
Here we add some API functions on the UDPv5 object for the purpose of implementing
the Portal Network JSON-RPC API in the shisui client.
---------
Signed-off-by: Chen Kai <281165273grape@gmail.com>
This PR moves the updating of the `blockProcFeed` event feed from
`InsertChain` to `insertChain` in order to ensure that the feed
subscribers are notified whenever block processing happens.
Note that this event is not subscribed to anywhere in our codebase at
the moment, earlier it was used by the LES server to avoid slowing down
block processing. Now I want to do the same with the log indexer, the
problem is that back then every block insertion was done by
`InsertChain`, now the regular payload insertion is done by
`InsertBlockWithoutSetHead`. Both of these (and also `SetCanonical` if
needed) calls `insertChain` so I moved the feed update there.
Here I am adding a config option and geth flag (`--history.chain`) for
configuring history pruning. There are two options available:
- `--history.chain all` is the default and will keep all history like
before.
- `--history.chain postmerge` will configure the history cutoff point to
the merge block.
The option doesn't actually do anything right now, but we need it as a
precursor for other history pruning changes.
When I press Ctrl-C during the import of multiple files, the import
process will still attempt to import the subsequent files. However, in
normal circumstances, users would expect the import to stop immediately
upon pressing Ctrl-C.
And because the current file was not finished importing, subsequent
import tasks often fail due to an `unknown ancestor` error.
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
The metric always has a value, no need to check for the nil.
Seems this code was first introduced here
054412e335/metrics/meter.go (L45-L48)
As the `nilMeter` was removed, so this check seems is useless.
Signed-off-by: jsvisa <delweng@gmail.com>
This updates the blsync base types for the Electra fork. I've been
testing, and it doesn't seem to make blsync fully work on Electra. But
I'd still like to get this in to make some progress.
---------
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
This error log in `legacypool.go` isn't necessary, since even though the
behavior is unexpected, it is handled correctly. A discussion on issue
#22301 concluded that this should instead be a warning log.
1. The metric of preimage/hits are always the same as preimage/total, prefer to replace
the hits with miss instead.
2. For the state/read/accounts metric, follow the same naming of others,
change into singuar.
This resolves a situation on the Sepolia testnet, which has a different
deposit contract. The contract on that network emits two kinds of logs,
instead of only deposit events like the deposit contract on mainnet. So
we need to skip events with mismatched topics.
This ensures that if we receive a blob transaction announcement where we cannot
link the tx to the sidecar commitments, we will drop the sending peer. This check
is added in the protocol handler for the PooledTransactions message.
Tests for this have also been added in the cross-client "eth" protocol test suite.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
In transaction-sending APIs such as `eth_sendRawTransaction`, a submitted transaction
failing the configured txpool validation rules (i.e. fee too low) would cause an error to be
returned, even though the transaction was successfully added into the locals tracker.
Once added there, the transaction may even be included into the chain at a later time,
when fee market conditions change.
This change improves on this by performing the validation in the locals tracker, basically
skipping some of the validation rules for local transactions. We still try to add the tx to the
main pool immediately, but an error will only be returned for transactions which are
fundamentally invalid.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This is a not-particularly-important "cleanliness" PR. It removes the
last remnants of the `x/exp` package, where we used the `maps.Keys`
function.
The original returned the keys in a slice, but when it became 'native'
the signature changed to return an iterator, so the new idiom is
`slices.Collect(maps.Keys(theMap))`, unless of course the raw iterator
can be used instead.
In some cases, where we previously collect into slice and then sort, we
can now instead do `slices.SortXX` on the iterator instead, making the
code a bit more concise.
This PR might be _slighly_ less optimal, because the original `x/exp`
implementation allocated the slice at the correct size off the bat,
which I suppose the new code won't.
Putting it up for discussion.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This changes the go mod tidy check to use the go mod tidy -diff command,
removing the custom diffing for go.mod. The check for go.mod/go.sum is now
performed in the check_generate action.
Also included is a change where check_generate and check_baddeps will now
run on the GitHub Actions lint step.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This is for fixing the PPA build, which has been failing since the
update to Go 1.24. In Go 1.24, the required Go version for bootstrapping
was updated to 1.22. In general, they are following through with always
depending on the Go version two releases ago for bootstrapping.
Since we still support Ubuntu Xenial (16.04) until its EOL date of
04/2026, and Xenial only has golang 1.10 as a package, we now need to
build Go a total of four times to get the most recent version. I'm adding a step
for Go 1.23 here. This should last us until Go 1.25, which should be out around
04/2026, and we can hopefully drop the first bootstrapping step at that time.
when remove an non-SetCodeTxType transaction, error logs flood
```
t=2025-02-25T03:11:06+0000 lvl=error msg="Authority with untracked tx" addr=0xD5bf9221fCB1C31Cd1EE477a60c148d40dD63DC1 hash=0x626fdf205a5b1619deb2f9e51fed567353f80acbd522265b455daa0821c571d9
```
in this PR, only try to removeAuthorities for txs with SetCodeTxType
in addition, the performance of removeAuthorities improved a lot,
because no need range all `t.auths` now.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Fixes lint issue
>>> /home/appveyor/.gvm/gos/go1.24.0/bin/go generate ./...
ci.go:404: File changed: .git/index
ci.go:407: One or more generated files were updated by running 'go generate ./...'
exit status 1
We forgot to add the deposit contract address for holesky, causing
deposits to not be flagged correctly
---------
Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com>
In this PR, several improvements have been made:
Authorization-related validations have been moved to legacyPool.
Previously, these checks were part of the standard validation procedure,
which applies common validations across different pools. Since these
checks are specific to SetCode transactions, relocating them to
legacyPool
is a more reasonable choice.
Additionally, authorization conflict checks are now performed regardless
of whether the transaction is a replacement or not.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Updates cloudflare-go from v0.79.0 to v0.114.0 which also gets rid of a
dependency to `github.com/hashicorp/go-retryablehttp` which had a
security flaw.
Diff:
https://github.com/cloudflare/cloudflare-go/compare/v0.79.0...v0.114.0
I did a quick sanity check on the diff on all methods that we use and
went through the release notes, there was nothing related to how we use
it afaict
I ran into this while trying to debug a discv5 thing. I tried to disable
DNS discovery using `--discovery.dns=false`, which doesn't work.
Annoyingly, geth started anyway and discarded the error silently. I
eventually found my mistake, but it took way longer than it should have.
Also including a small change to the error message for invalid DNS URLs
here. The user actually needs to see the URL to make sense of the error.
Fixed broken or outdated links and improved documentation formatting to
ensure consistency and correct references.
---------
Co-authored-by: Sina M <1591639+s1na@users.noreply.github.com>
Shout-out to @Gabriel-Trintinalia for discovering this issue. The gist
of it as follows:
When processing a block, we should provide the parent block as well as
the last 256 block hashes. Some of these parents data (specifically the
hash) was incorrect because even though during the processing of the
parent block we have updated the header, that header was not updating
the TransactionsRoot and ReceiptsRoot fields (types.NewBlock makes a new
copy of the header and changes it only on that instance).
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
The test occasionally fails when network connectivity is bad or if it
hits the wrong server. We usually don't add tests with external network
dependency so I'm removing them.
Fixes#31220
eth_simulate was not processing prague system calls for history contract and EL
requests resulting in inaccurate stateRoot and requestsRoot fields in the block.
I maintain an improved version of the go-ethereum assembler at
https://github.com/fjl/geas. We don't really use core/asm in our tests,
and it has some bugs that prevent it from being useful, so I'm removing
the package.
This PR does a few things including:
- Remove `ContractRef` interface
- Remove `vm.AccountRef` which implements `ContractRef` interface
- Maintain the `jumpDests` struct in EVM for sharing between call frames
- Simplify the delegateCall context initialization
Adds a comment on how to use rpc.*BlockNumber and the explanation of the block number tags
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR removes the assumption of the stacktrie and trie to have the
same ordering. This was hit by the fuzzers on oss-fuzz
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This fixes a regression introduced in #31153 where we didn't consider
mainnet to be in PoS, causing #31190.
The problem is, `params.MainnetChainConfig` does not have a defined
`MergeNetsplitBlock`, so it isn't considered to be in PoS in
`CalcDifficulty`.
Currently, when calculating block's bloom, we loop through all the
receipt logs to calculate the hash value. However, normally, after going
through applyTransaction, the receipt's bloom is already calculated
based on the receipt log, so the block's bloom can be calculated by just
ORing these receipt's blooms.
```
goos: darwin
goarch: arm64
pkg: github.com/ethereum/go-ethereum/core/types
cpu: Apple M1 Pro
BenchmarkCreateBloom
BenchmarkCreateBloom/small
BenchmarkCreateBloom/small-10 810922 1481 ns/op 104 B/op 5 allocs/op
BenchmarkCreateBloom/large
BenchmarkCreateBloom/large-10 8173 143764 ns/op 9614 B/op 401 allocs/op
BenchmarkCreateBloom/small-mergebloom
BenchmarkCreateBloom/small-mergebloom-10 5178918 232.0 ns/op 0 B/op 0 allocs/op
BenchmarkCreateBloom/large-mergebloom
BenchmarkCreateBloom/large-mergebloom-10 54110 22207 ns/op 0 B/op 0 allocs/op
```
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
This PR addresses a flaw in the freezer table upgrade path.
In v1.15.0, freezer table v2 was introduced, including an additional
field (`flushOffset`) maintained in the metadata file. To ensure
backward compatibility, an upgrade path was implemented for legacy
freezer tables by setting `flushOffset` to the size of the index file.
However, if the freezer table is opened in read-only mode, this file
write operation is rejected, causing Geth to shut down entirely.
Given that invalid items in the freezer index file can be detected and
truncated, all items in freezer v0 index files are guaranteed to be
complete. Therefore, when operating in read-only mode, it is safe to
use the freezer data without performing an upgrade.
This is to prevent a crash on startup with a custom genesis configuration.
With this change in place, upgrading a chain created by geth v1.14.x and
below will now print an error instead of crashing:
Fatal: Failed to register the Ethereum service: invalid chain configuration: missing entry for fork "cancun" in blobSchedule
Arguably this is not great, and it should just auto-upgrade the config.
We'll address this in a follow-up PR for geth v1.15.2
This fixes an error where executing `evm run --dump ...` omits preimages
from the dump (because the statedb used for execution is a copy of
another instance).
The new SetCode transaction type introduces some additional complexity
when handling the transaction pool.
This complexity stems from two new account behaviors:
1. The balance and nonce of an account can change during regular
transaction execution *when they have a deployed delegation*.
2. The nonce and code of an account can change without any EVM execution
at all. This is the "set code" mechanism introduced by EIP-7702.
The first issue has already been considered extensively during the design
of ERC-4337, and we're relatively confident in the solution of simply
limiting the number of in-flight pending transactions an account can have
to one. This puts a reasonable bound on transaction cancellation. Normally
to cancel, you would need to spend 21,000 gas. Now it's possible to cancel
for around the cost of warming the account and sending value
(`2,600+9,000=11,600`). So 50% cheaper.
The second issue is more novel and needs further consideration.
Since authorizations are not bound to a specific transaction, we
cannot drop transactions with conflicting authorizations. Otherwise,
it might be possible to cherry-pick authorizations from txs and front
run them with different txs at much lower fee amounts, effectively DoSing
the authority. Fortunately, conflicting authorizations do not affect the
underlying validity of the transaction so we can just accept both.
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Felix Lange <fjl@twurst.com>
This removes the method `TestingTTDBlock` introduced by #30744. It was
added to make the beacon consensus engine aware of the merge block in
tests without relying on the total difficulty. However, tracking the
merge block this way is very annoying. We usually configure forks in the
`ChainConfig`, but the method is on the consensus engine, which isn't
always created in the same place. By sidestepping the `ChainConfig` we
don't get the usual fork-order checking, so it's possible to enable the
merge before the London fork, for example. This in turn can lead to very
hard-to-debug outputs and validation errors.
So here I'm changing the consensus engine to check the
`MergeNetsplitBlock` instead. Alternatively, we assume a network is
merged if it has a `TerminalTotalDifficulty` of zero, which is a very
common configuration in tests.
Agreed to the following fork dates for Holesky and Sepolia on ACDC 150
Holesky slot: 3710976 (Mon, Feb 24 at 21:55:12 UTC)
Sepolia slot: 7118848 (Wed, Mar 5 at 07:29:36 UTC)
After recent changes in Geth (removing TD):
39638c81c5 (diff-d70a44d4b7a0e84fe9dcca25d368f626ae6c9bc0b8fe9690074ba92d298bcc0d)
Non-Geth clients are failing many devp2p tests with an error:
`peering failed: status exchange failed: wrong TD in status: have 1 want 0`
Right now only Geth is passing it - all other clients are affected by
this change. I think there should be no validation of TD when checking `Status`
message in hive tests. Now Geth has 0 (and hive tests requires 0) and
all other clients have actual TD. And on real networks there is no validation
of TD when peering
Here we add some more changes for live tracing API v1.1:
- Hook `OnSystemCallStartV2` was introduced with `VMContext` as parameter.
- Hook `OnBlockHashRead` was introduced.
- `GetCodeHash` was added to the state interface
- The new `WrapWithJournal` construction helps with tracking EVM reverts in the tracer.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR changes the signature of `CalcExcessBlobGas` to take in just
the header timestamp instead of the whole object. It also adds a sanity
check for the parent->child block order to `VerifyEIP4844Header`.
A clarification was made to EIP-7691 stating that at the fork boundary
it is required to use the target blob count associated with the head
block, rather than the parent as implemented here.
See for more: https://github.com/ethereum/EIPs/pull/9249
Replaces #29297, descendant from #27535
---------
This PR removes `locals` as a concept from transaction pools. Therefore,
the pool now acts as very a good simulation/approximation of how our
peers' pools behave. What this PR does instead, is implement a
locals-tracker, which basically is a little thing which, from time to
time, asks the pool "did you forget this transaction?". If it did, the
tracker resubmits it.
If the txpool _had_ forgotten it, chances are that the peers had also
forgotten it. It will be propagated again.
Doing this change means that we can simplify the pool internals, quite a
lot.
### The semantics of `local`
Historically, there has been two features, or usecases, that has been
combined into the concept of `locals`.
1. "I want my local node to remember this transaction indefinitely, and
resubmit to the network occasionally"
2. "I want this (valid) transaction included to be top-prio for my
miner"
This PR splits these features up, let's call it `1: local` and `2:
prio`. The `prio` is not actually individual transaction, but rather a
set of `address`es to prioritize.
The attribute `local` means it will be tracked, and `prio` means it will
be prioritized by miner.
For `local`: anything transaction received via the RPC is marked as
`local`, and tracked by the tracker.
For `prio`: any transactions from this sender is included first, when
building a block. The existing commandline-flag `--txpool.locals` sets
the set of `prio` addresses.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
I hit this case while trying something with the simulated backend. The
EVM only enables instruction set forks after the merge when 'Random' is
set. In the simulated backend, the random value will be set via the
engine API for all blocks after genesis. But for the genesis block
itself, the random value will not be assigned in the vm.BlockContext
because the genesis has a non-zero difficulty. For my case, this meant
that estimateGas did not work for the first transaction sent on the
simulated chain, since the contract contained a PUSH0 instruction.
This could also be fixed by explicitly configuring a zero difficulty in
the simulated backend. However, I think that zero difficulty is a better
default these days.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
This PR defines the Osaka fork. An easy first step to start our work on
the next hardfork
(This is needed for EOF testing as well)
---------
Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com>
This is a follow-up PR to #29792 to get rid of the data file sync.
**This is a non-backward compatible change, which increments the
database version from 8 to 9**.
We introduce a flushOffset for each freezer table, which tracks the position
of the most recently fsync’d item in the index file. When this offset moves
forward, it indicates that all index entries below it, along with their corresponding
data items, have been properly persisted to disk. The offset can also be moved
backward when truncating from either the head or tail of the file.
Previously, the data file required an explicit fsync after every mutation, which
was highly inefficient. With the introduction of the flush offset, the synchronization
strategy becomes more flexible, allowing the freezer to sync every 30 seconds
instead.
The data items above the flush offset are regarded volatile and callers must ensure
they are recoverable after the unclean shutdown, or explicitly sync the freezer
before any proceeding operations.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Fixes a typo in the error message within the `fuzzCrossG2Add`
function. The panic message incorrectly references "G1 point addition
mismatch" when it should be "G2 point addition mismatch," as the
function deals with G2 points.
This doesn't affect functionality but could cause confusion during
debugging. I've updated the message to reflect the correct curve.
This PR builds on #29040 and updates it to the new version of the spec.
I filled the EEST tests and they pass.
Link to spec: https://eips.ethereum.org/EIPS/eip-7623
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com>
Co-authored-by: lightclient <lightclient@protonmail.com>
Same as #31015 but requires the contract to exist. Not compatible with
any verkle testnet up to now.
This adds a `isSytemCall` flag so that it is possible to detect when a
system call is executed, so that the code execution and other locations
are not added to the witness.
---------
Signed-off-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
Co-authored-by: Ignacio Hagopian <jsign.uy@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
The total difficulty is the sum of all block difficulties from genesis
to a certain block. This value was used in PoW for deciding which chain
is heavier, and thus which chain to select. Since PoS has a different
fork selection algorithm, all blocks since the merge have a difficulty
of 0, and all total difficulties are the same for the past 2 years.
Whilst the TDs are mostly useless nowadays, there was never really a
reason to mess around removing them since they are so tiny. This
reasoning changes when we go down the path of pruned chain history. In
order to reconstruct any TD, we **must** retrieve all the headers from
chain head to genesis and then iterate all the difficulties to compute
the TD.
In a world where we completely prune past chain segments (bodies,
receipts, headers), it is not possible to reconstruct the TD at all. In
a world where we still keep chain headers and prune only the rest,
reconstructing it possible as long as we process (or download) the chain
forward from genesis, but trying to snap sync the head first and
backfill later hits the same issue, the TD becomes impossible to
calculate until genesis is backfilled.
All in all, the TD is a messy out-of-state, out-of-consensus computed
field that is overall useless nowadays, but code relying on it forces
the client into certain modes of operation and prevents other modes or
other optimizations. This PR completely nukes out the TD from the node.
It doesn't compute it, it doesn't operate on it, it's as if it didn't
even exist.
Caveats:
- Whenever we have APIs that return TD (devp2p handshake, tracer, etc.)
we return a TD of 0.
- For era files, we recompute the TD during export time (fairly quick)
to retain the format content.
- It is not possible to "verify" the merge point (i.e. with TD gone, TTD
is useless). Since we're not verifying PoW any more, just blindly trust
it, not verifying but blindly trusting the many year old merge point
seems just the same trust model.
- Our tests still need to be able to generate pre and post merge blocks,
so they need a new way to split the merge without TTD. The PR introduces
a settable ttdBlock field on the consensus object which is used by tests
as the block where originally the TTD happened. This is not needed for
live nodes, we never want to generate old blocks.
- One merge transition consensus test was disabled. With a
non-operational TD, testing how the client reacts to TTD is useless, it
cannot react.
Questions:
- Should we also drop total terminal difficulty from the genesis json?
It's a number we cannot react on any more, so maybe it would be cleaner
to get rid of even more concepts.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This implements a basic mechanism to query the node's external IP using
a STUN server. There is a built-in list of public STUN servers for convenience.
The new detection mechanism must be selected explicitly using `--nat=stun`
and is not enabled by default in Geth.
Fixes#30881
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
The latest firmware for Ledger Nano S Plus now returns `0x5000` for it's
product ID, which doesn't match any of the product IDs enumerated in
`hub.go`.
This PR removes the assumption about the interfaces exposed, and simply
checks the upper byte for a match.
Also adds support for the `0x0007` / `0x7000` product ID (Ledger Flex).
State history v2 has been shipped and will take effect after the Cancun fork.
However, the state revert function does not differentiate between v1 and v2,
instead blindly using the storage map key for state reversion.
This mismatch between the keys of the live state set and the state history
can trigger a panic: `non-existent storage slot for reverting`.
This flaw has been fixed in this PR.
This is an alternative for #27407 with a solution based on gencodec.
With the PR, one can now configure like this:
```
# config.toml
[Node.P2P]
NAT = "extip:33.33.33.33"
```
```shell
$ geth --config config.toml
...
INFO [01-17|16:37:31.436] Started P2P networking self=enode://2290...ab@33.33.33.33:30303
```
Refactoring of the `evm` command moved where some commands were valid.
One command, `--bench`, used to work in `evm statetest`. The pluming is
still in place. This PR puts the `--bench` flag in the place the trace
flags were moved, and adds tests to validate the bench flag operates in
`run` and `statetest`
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
We have our own system for downloading the toolchain, and really don't
want Go's to get in the way of that. We may switch to Go's builtin
toolchain support, but not now.
As part of trying to make the inputs and outputs of the evm subcommands
more streamlined and aligned, this PR modifies how `evm t8n` manages
output-files.
Previously, we do a kind of wonky thing where between each transaction,
we invoke a `getTracer` closure. In that closure, we create a new
output-file, a tracer, and then make the tracer stream output to the
file. We also fiddle a bit to ensure that the file becomes properly
closed.
It is a kind of hacky solution we have in place. This PR changes it, so
that from the execution-pipeline point of view, we have just a regular
tracer. No fiddling with re-setting it or closing files.
That particular tracer, however, is a bit special: it takes care of
creating new files per transaction (in the tx-start-hook) and closing
(on tx-end-hook). Also instantiating the right type of underlying
tracer, which can be a json-logger or a custom tracer.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR addresses issue #30768 , which highlights that running
cmd/abigen/abigen --pkg my_package example.json (erroneously omitting
the --abi flag) generates an empty binding, when it should fail
explicitly.
---------
Co-authored-by: jwasinger <j-wasinger@hotmail.com>
This PR replaces the iterator based DeleteRange implementation of
memorydb with a simpler and much faster loop that directly deletes keys
in the order of iteration instead of unnecessarily collecting keys in
memory and sorting them.
---------
Co-authored-by: Martin HS <martin@swende.se>
This pull request delivers the new version of the state history, where
the raw storage key is used instead of the hash.
Before the cancun fork, it's supported by protocol to destruct a
specific account and therefore, all the storage slot owned by it should
be wiped in the same transition.
Technically, storage wiping should be performed through storage
iteration, and only the storage key hash will be available for traversal
if the state snapshot is not available. Therefore, the storage key hash
is chosen as the identifier in the old version state history.
Fortunately, account self-destruction has been deprecated by the
protocol since the Cancun fork, and there are no empty accounts eligible
for deletion under EIP-158. Therefore, we can conclude that no storage
wiping should occur after the Cancun fork. In this case, it makes no
sense to keep using hash.
Besides, another big reason for making this change is the current format
state history is unusable if verkle is activated. Verkle tree has a
different key derivation scheme (merkle uses keccak256), the preimage of
key hash must be provided in order to make verkle rollback functional.
This pull request is a prerequisite for landing verkle.
Additionally, the raw storage key is more human-friendly for those who
want to manually check the history, even though Solidity already
performs some hashing to derive the storage location.
---
This pull request doesn't bump the database version, as I believe the
database should still be compatible if users degrade from the new geth
version to old one, the only side effect is the persistent new version
state history will be unusable.
---------
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
This changes the SenderCacher so its goroutines will only be started on first use.
Avoids starting them when package core is just imported but core.BlockChain isn't used.
We still need to decide how to handle non-specfic `chainId` in the JSON
encoding of authorizations. With `chainId` being a uint64, the previous
implementation just used value zero. However, it might actually be more
correct to use the value `null` for this case.
This pull request refactors the genesis setup function, the major
changes are highlighted here:
**(a) Triedb is opened in verkle mode if `EnableVerkleAtGenesis` is
configured in chainConfig or the database has been initialized previously with
`EnableVerkleAtGenesis` configured**.
A new config field `EnableVerkleAtGenesis` has been added in the
chainConfig. This field must be configured with True if Geth wants to initialize
the genesis in Verkle mode.
In the verkle devnet-7, the verkle transition is activated at genesis.
Therefore, the verkle rules should be used since the genesis. In production
networks (mainnet and public testnets), verkle activation always occurs after
the genesis block. Therefore, this flag is only made for devnet and should be
deprecated later. Besides, verkle transition at non-genesis block hasn't been
implemented yet, it should be done in the following PRs.
**(b) The genesis initialization condition has been simplified**
There is a special mode supported by the Geth is that: Geth can be
initialized with an existing chain segment, which can fasten the node sync
process by retaining the chain freezer folder.
Originally, if the triedb is regarded as uninitialized and the genesis block can
be found in the chain freezer, the genesis block along with genesis state will be
committed. This condition has been simplified to checking the presence of chain
config in key-value store. The existence of chain config can represent the genesis
has been committed.
- it was failing because the maximum data length (previously `dataSize`)
was set to `txMaxSize - 213` but should had been `txMaxSize - 103` and
the last call `dataSize+1+uint64(rand.Intn(10*txMaxSize)))` would
sometimes fail depending on rand.Intn.
- Maximal transaction data size comment (invalid) replaced by code logic
to find the maximum tx length without its data length
- comments and variable naming improved for clarity
- 3rd pool add test replaced to add just 1 above the maximum length,
which is important to ensure the logic is correct
Fix the error comparison in tracer to prevent dropping revert reason data
---------
Co-authored-by: Martin <mrscdevel@gmail.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
This PR upgrades `golangci-lint` to v1.63.4 and fixes a warn message
which is reported by v1.63.4:
```text
WARN [config_reader] The configuration option `run.skip-dirs-use-default` is deprecated, please use `issues.exclude-dirs-use-default`.
```
Also fixes 2 warnings which are reported by v1.63.4:
```text
core/txpool/blobpool/blobpool.go:1754:12: S1005: unnecessary assignment to the blank identifier (gosimple)
for acct, _ := range p.index {
^
core/txpool/legacypool/legacypool.go:1989:19: S1005: unnecessary assignment to the blank identifier (gosimple)
for localSender, _ := range pool.locals.accounts {
^
```
As the node hash scheme in verkle and merkle are totally different, the
original default node hasher in pathdb is no longer suitable. Therefore,
this pull request configures different node hasher respectively.
This change fixes is a rare bug in test generator: If the run is very unlucky it
can use `modifyAccountOp` / `deleteAccountOp` without creating any
account, leading to have a trie root same as the parent.
This change makes the first operation always be a creation.
This commit makes it so that the struct logger will not emit logs while
system calls are being executed. This will make it consistent with
the JSON and MD loggers. It is as it stands hard to distinguish when
system calls are being processed vs when a tx is being processed.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Here I am proposing two small changes to the exported API for EIP-7702:
(1) `Authorization` has a very generic name, but it is in fact only used
for one niche use case: authorizing code in a `SetCodeTx`. So I propose
calling it `SetCodeAuthorization` instead. The signing function is
renamed to `SignSetCode` instead of `SignAuth`.
(2) The signing function for authorizations should take key as the first
parameter, and the authorization second. The key will almost always be
in a variable, while the authorization can be given as a literal.
This fixes a regression introduced recently. Without this fix, it's not
possible to use statetests without `.json` suffix. This is problematic for
goevmlab `minimizer`, which appends the suffix `.min` during processing.
Fixing some issues I found while regenerating RPC tests for Prague:
- Authorization signature values were not encoded as hex
- `requestsRoot` in block should be `requestsHash`
- `authorizationList` should work for `eth_call`
Noticed this omission while doing some work on goevmlab. We don't
properly type some of the opcodes, but apparently implicit casting works
in all the internal usecases.
Adding some missing functionality I noticed while updating the hivechain
tool for the Prague fork:
- we forgot to process the parent block hash
- added `ConsensusLayerRequests` to get the requests list of the block
This change adds methods which makes it possible for to wait for a transaction with a specific hash when deploying contracts during abi bind interaction.
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
In this pull request, the state iterator is implemented. It's mostly a copy-paste
from the original state snapshot package, but still has some important changes
to highlight here:
(a) The iterator for the disk layer consists of a diff iterator and a disk iterator.
Originally, the disk layer in the state snapshot was a wrapper around the disk,
and its corresponding iterator was also a wrapper around the disk iterator.
However, due to structural differences, the disk layer iterator is divided into
two parts:
- The disk iterator, which traverses the content stored on disk.
- The diff iterator, which traverses the aggregated state buffer.
Checkout `BinaryIterator` and `FastIterator` for more details.
(b) The staleness management is improved in the diffAccountIterator and
diffStorageIterator
Originally, in the `diffAccountIterator`, the layer’s staleness had to be checked
within the Next function to ensure the iterator remained usable. Additionally,
a read lock on the associated diff layer was required to first retrieve the account
blob. This read lock protection is essential to prevent concurrent map read/write.
Afterward, a staleness check was performed to ensure the retrieved data was
not outdated.
The entire logic can be simplified as follows: a loadAccount callback is provided
to retrieve account data. If the corresponding state is immutable (e.g., diff layers
in the path database), the staleness check can be skipped, and a single account
data retrieval is sufficient. However, if the corresponding state is mutable (e.g.,
the disk layer in the path database), the callback can operate as follows:
```go
func(hash common.Hash) ([]byte, error) {
dl.lock.RLock()
defer dl.lock.RUnlock()
if dl.stale {
return nil, errSnapshotStale
}
return dl.buffer.states.mustAccount(hash)
}
```
The callback solution can eliminate the complexity for managing
concurrency with the read lock for atomic operation.
This PR implements EIP-7702: "Set EOA account code".
Specification: https://eips.ethereum.org/EIPS/eip-7702
> Add a new transaction type that adds a list of `[chain_id, address,
nonce, y_parity, r, s]` authorization tuples. For each tuple, write a
delegation designator `(0xef0100 ++ address)` to the signing account’s
code. All code reading operations must load the code pointed to by the
designator.
---------
Co-authored-by: Mario Vega <marioevz@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
Closes#23210
# Context
When deploying Geth in Kubernetes with ReplicaSets, we encountered two
DNS-related issues affecting node connectivity. First, during startup,
Geth tries to resolve DNS names for static nodes too early in the config
unmarshaling phase. If peer nodes aren't ready yet (which is common in
Kubernetes rolling deployments), this causes an immediate failure:
```
INFO [11-26|10:03:42.816] Starting Geth on Ethereum mainnet...
INFO [11-26|10:03:42.817] Bumping default cache on mainnet provided=1024 updated=4096
Fatal: config.toml, line 81: (p2p.Config.StaticNodes) lookup idontexist.geth.node: no such host
```
The second issue comes up when pods get rescheduled to different nodes -
their IPs change but peers keep using the initially resolved IP, never
updating the DNS mapping.
This PR adds proper DNS support for enode:// URLs by deferring resolution
to connection time. It also handles DNS failures gracefully instead of failing
fatally during startup, making it work better in container environments where
IPs are dynamic and peers come and go during rollouts.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This fixes an issue where the disconnect message was not wrapped in a list.
The specification requires it to be a list like any other message.
In order to remain compatible with legacy geth versions, we now accept both
encodings when parsing a disconnect message.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR modifies how the metrics library handles `Enabled`: previously,
the package `init` decided whether to serve real metrics or just
dummy-types.
This has several drawbacks:
- During pkg init, we need to determine whether metrics are enabled or
not. So we first hacked in a check if certain geth-specific
commandline-flags were enabled. Then we added a similar check for
geth-env-vars. Then we almost added a very elaborate check for
toml-config-file, plus toml parsing.
- Using "real" types and dummy types interchangeably means that
everything is hidden behind interfaces. This has a performance penalty,
and also it just adds a lot of code.
This PR removes the interface stuff, uses concrete types, and allows for
the setting of Enabled to happen later. It is still assumed that
`metrics.Enable()` is invoked early on.
The somewhat 'heavy' operations, such as ticking meters and exp-decay,
now checks the enable-flag to prevent resource leak.
The change may be large, but it's mostly pretty trivial, and from the
last time I gutted the metrics, I ensured that we have fairly good test
coverage.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR attempts to clean up some ambiguities and quirks from recent
changes to evm flag handling.
This PR mainly focuses on `evm run` subcommand, to use the same flags
for configuring tracing/output options as `statetest/blocktest` does.
Additionally, it adds quite a lot of tests for expected outputs of the
various subcommands, to avoid accidental changes.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
It's a pull request based on https://github.com/ethereum/go-ethereum/pull/30643
In this pull request, the partial functional state reader is enabled if **legacy snapshot
is not enabled**. The tracked flat states in pathdb will be used to serve the state
retrievals, as the second implementation to fasten the state access.
This pull request should be a noop change in normal cases.
This PR extends the Hooks interface with a new method,
`OnSystemCallStartV2`, which takes `VMContext` as its parameter.
Motivation
By including `VMContext` as a parameter, the `OnSystemCallStartV2` hook
achieves parity with the `OnTxStart` hook in terms of provided insights.
This alignment simplifies the inner tracer logic, enabling consistent
handling of state changes and internal calls within the same framework.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR refactors the structlog a bit, making it so that it can be used
in a streaming mode.
-------------
OBS: this PR makes a change in the input `config` config, the third
input-parem field to `debug.traceCall`. Previously, seteting it to e.g.
` {"enableMemory": true, "limit": 1024}` would mean that the response
was limited to `1024` items. Since an 'item' may include both memory and
storage, the actual size of the response was undertermined.
After this change, the response will be limited to `1024` __`bytes`__
(or thereabouts).
-----------
The commandline usage of structlog now uses the streaming mode, leaving
the non-streaming mode of operation for the eth_Call.
There are two benefits of streaming mode
1. Not have to maintain a long list of operations,
2. Not have to duplicate / n-plicate data, e.g. memory / stack /
returndata so that each entry has their own private slice.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Lots of packages depend on eth/downloader just for the SyncMode type.
Since we have a dedicated package for eth protocol configuration, it
makes more sense to define SyncMode there, turning eth/downloader into
more of a leaf package.
This flag is very rarely needed, so it's OK for it to have a verbose
name. The name --trace also conflicts with the concept of EVM tracing,
which is much more heavily used.
The fuzzer added recenly to fuzz the eth handler doesn't
build on oss-fuzz, because it also has dependencies in the peer_test.go.
This change fixes it, I hope, by adding that file also for preprocessing.
* unify `staterunner` and `blockrunner` CLI flags, especially around
tracing
* added support for struct logger or json logging (although having issue
#30658)
* new --cross-check flag to validate the stateless witness collection
/ execution matches stateful
* adds support for tracing the stateless execution when a tracer is set
(to more easily debug differences)
* --human for more readable test summary
* directory or file input, so if you pass tests/spec-tests/fixtures/blockchain_tests it will execute all
blockchain tests
When a tx/block was being traced through the API the state hooks weren't
being called as they should. This is due to #30745 moving the hooked
statedb one level up in the state processor. This PR fixes that.
---------
Co-authored-by: Martin HS <martin@swende.se>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This change relocates the EVM tx context switching to the ApplyMessage function.
With this change, we can remove a lot of EVM.SetTxContext calls before
message execution.
### Tracing API changes
- This PR replaces the `GasPrice` field of the `VMContext` struct with
`BaseFee`. Users may instead take the effective gas price from
`tx.EffectiveGasTipValue(env.BaseFee)`.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR introduces a `ContractCodeReader` interface with functions defined:
type ContractCodeReader interface {
Code(addr common.Address, codeHash common.Hash) ([]byte, error)
CodeSize(addr common.Address, codeHash common.Hash) (int, error)
}
This interface can be implemented in various ways. Although the codebase
currently includes only one implementation, additional implementations
could be created for different purposes and scenarios, such as a code
reader designed for the Verkle tree approach or one that reads code from
the witness.
*Notably, this interface modifies the function’s semantics. If the
contract code is not found, no error will be returned. An error should
only be returned in the event of an unexpected issue, primarily for
future implementations.*
The original state.Reader interface is extended with ContractCodeReader
methods, it gives us more flexibility to manipulate the reader with additional
logic on top, e.g. Hooks.
type Reader interface {
ContractCodeReader
StateReader
}
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This pull request ports some changes from the main state snapshot
integration one, specifically introducing the flat state tracking in
pathdb.
Note, the tracked flat state changes are only held in memory and won't
be persisted in the disk. Meanwhile, the correspoding state retrieval in
persistent state is also not supported yet. The states management in
disk is more complicated and will be implemented in a separate pull
request.
Part 1: https://github.com/ethereum/go-ethereum/pull/30752
The existing implementation is correct when building and verifying
blocks, since we will only collect non-empty requests into the block
requests list.
But it isn't correct for cases where a requests list containing empty
items is sent by the consensus layer on the engine API. We want to
ensure that empty requests do not cause a difference in validation
there, so the commitment computation should explicitly skip them.
Since we don't really support custom networks anymore, we don't need the
bootnode utility. In case a discovery-only node is wanted, it can still be run using cmd/devp2p.
This workaround is meant to minimize the possibility for snapshot generation
once the geth node upgrades to new version (specifically #30752 )
In #30752, the journal format in state snapshot is modified by removing
the destruct set. Therefore, the existing old format (version = 0) will be
discarded and all in-memory layers will be lost. Unfortunately, the lost
in-memory layers can't be recovered by some other approaches, and the
entire state snapshot will be regenerated (it will last about 2.5 hours).
This pull request introduces a workaround to adopt the legacy journal if
the destruct set contained is empty. Since self-destruction has been
deprecated following the cancun fork, the destruct set is expected to be nil for
layers above the fork block. However, an exception occurs during contract
deployment: pre-funded accounts may self-destruct, causing accounts with
non-zero balances to be removed from the state. For example,
https://etherscan.io/tx/0xa087333d83f0cd63b96bdafb686462e1622ce25f40bd499e03efb1051f31fe49).
For nodes with a fully synced state, the legacy journal is likely compatible with
the updated definition, eliminating the need for regeneration. Unfortunately,
nodes performing a full sync of historical chain segments or encountering
pre-funded account deletions may face incompatibilities, leading to automatic
snapshot regeneration.
Reusing state between benchmark iterations resulted in inconsistent
results across runs, which surfaced in https://github.com/ethereum/go-ethereum/issues/30778 .
If these errors are triggered again, they will now trigger panic.
---------
Co-authored-by: Martin HS <martin@swende.se>
This reverts commit 23800122b3.
The original pull request introduces a bug and some flaky tests are
detected because of this flaw.
```
--- FAIL: TestRecoverSnapshotFromWipingCrash (0.27s)
blockchain_snapshot_test.go:158: The disk layer is not integrated snapshot is not constructed
{"pc":0,"op":88,"gas":"0x7148","gasCost":"0x2","memSize":0,"stack":[],"depth":1,"refund":0,"opName":"PC"}
{"pc":1,"op":255,"gas":"0x7146","gasCost":"0x1db0","memSize":0,"stack":["0x0"],"depth":1,"refund":0,"opName":"SELFDESTRUCT"}
{"output":"","gasUsed":"0x0"}
{"output":"","gasUsed":"0x1db2"}
{"pc":0,"op":116,"gas":"0x13498","gasCost":"0x3","memSize":0,"stack":[],"depth":1,"refund":0,"opName":"PUSH21"}
```
Before the original PR, the snapshot would block the function until the
disk layer
was fully generated under the following conditions:
(a) explicitly required by users with `AsyncBuild = false`.
(b) the snapshot was being fully rebuilt or *the disk layer generation
had resumed*.
Unfortunately, with the changes introduced in that PR, the snapshot no
longer waits
for disk layer generation to complete if the generation is resumed. It
brings lots of
uncertainty and breaks this tiny debug feature.
This updates the message you get when trying to initialize Geth with
genesis.json that doesn't have `terminalTotalDifficulty`. The previous
message was a bit obscure, I had to check the code to find out what the
problem was.
This PR is purely for improved readability; I was doing work involving
the file and think this may help others who are trying to understand
what's going on.
1. `snapshot.Tree.Rebuild()` now returns a function that blocks until
regeneration is complete, allowing `Tree.waitBuild()` to be removed
entirely as all it did was search for the `done` channel behind this new
function.
2. Its usage inside `New()` is also simplified by (a) only waiting if
`!AsyncBuild`; and (b) avoiding the double negative of `if !NoBuild`.
---------
Co-authored-by: Martin HS <martin@swende.se>
#28764 updated `func MakeTopics` to support negative `*big.Int`s.
However, it also changed the behavior of the function from just
_reading_ the input `*big.Int` via `Bytes()`, to leveraging
`big.U256Bytes` which is documented as being _destructive_:
This change updates `MakeTopics` to not mutate the original, and
also applies the same change in signer/core/apitypes.
This PR improves the output of the markdown logger a bit.
- Remove `RStack` field,
- Move `Stack` last, since it may have very large vertical expansion
- Make the pre- and post-exec metadata structured into a bullet-list
This change fixes a bug on the `DirectoryFlag` and the `BigFlag`, which would trigger a `panic` with the message "flag redefined" in case an alias was added to such a flag.
This pull request removes the destruct flag from the state snapshot to
simplify the code.
Previously, this flag indicated that an account was removed during a
state transition, making all associated storage slots inaccessible.
Because storage deletion can involve a large number of slots, the actual
deletion is deferred until the end of the process, where it is handled
in batches.
With the deprecation of self-destruct in the Cancun fork, storage
deletions are no longer expected. Historically, the largest storage
deletion event in Ethereum was around 15 megabytes—manageable in memory.
In this pull request, the single destruct flag is replaced by a set of
deletion markers for individual storage slots. Each deleted storage slot
will now appear in the Storage set with a nil value.
This change will simplify a lot logics, such as storage accessing,
storage flushing, storage iteration and so on.
This pull request refactors the EVM constructor by removing the
TxContext parameter.
The EVM object is frequently overused. Ideally, only a single EVM
instance should be created and reused throughout the entire state
transition of a block, with the transaction context switched as needed
by calling evm.SetTxContext.
Unfortunately, in some parts of the code, the EVM object is repeatedly
created, resulting in unnecessary complexity. This pull request is the
first step towards gradually improving and simplifying this setup.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
In many cases, there is a need to create somewhat nontrivial bytecode. A
recent example is the verkle statetests, where we want a `CREATE2`- op
to create a contract, which can then be invoked, and when invoked does a
selfdestruct-to-self.
It is overkill to go full solidity, but it is also a bit tricky do
assemble this by concatenating bytes. This PR takes an approach that
has been used in in goevmlab for several years.
Using this utility, the case can be expressed as:
```golang
// Some runtime code
runtime := program.New().Ops(vm.ADDRESS, vm.SELFDESTRUCT).Bytecode()
// A constructor returning the runtime code
initcode := program.New().ReturnData(runtime).Bytecode()
// A factory invoking the constructor
outer := program.New().Create2AndCall(initcode, nil).Bytecode()
```
We have a lot of places in the codebase where we concatenate bytes, cast
from `vm.OpCode` . By taking tihs approach instead, thos places can be made a
bit more maintainable/robust.
This adds an API method `DropTransactions` to legacy pool, blob pool and
txpool interface. This method removes all txs currently tracked in the
pools.
It modifies the simulated beacon to use the new method in `Rollback`
which removes previous hacky implementation that also erroneously reset
the gas tip to 1 gwei.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
The [kilic](https://github.com/kilic/bls12-381) bls12381 implementation
has been archived. It shouldn't be necessary to include it as a fuzzing
target any longer.
This also adds fuzzers for G1/G2 mul that use inputs that are guaranteed
to be valid. Previously, we just did random input fuzzing for these
precompiles.
This is one further step towards removing account management from
`geth`. This PR deprecates the flag `unlock`, and makes the flag moot:
unlock via geth is no longer possible.
This change invokes the OnCodeChange hook when selfdestruct operation is performed, and a contract is removed. This is an event which can be consumed by tracers.
This PR moves chain config related code (config file processing, fork
logic, network defaults) from `beacon/types` and `beacon/blsync` into
`beacon/params` while the command line flag logic of the chain config is
moved into `cmd/utils`, thereby removing the cli dependencies from
package `beacon` and its sub-packages.
When `evm statetest --bench` is specified, benchmark the execution
similarly to `evm run`.
Also adds the ability to filter tests by name, index and fork.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
Adds testcase for createAccessList when user requested gasPrice is less than baseFee, also makes the tests tabledriven
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
Here I'm adding a new helper function that extracts the revert reason of
a contract call. Unfortunately, this aspect of the API is underspecified.
See these spec issues for more detail:
- https://github.com/ethereum/execution-apis/issues/232
- https://github.com/ethereum/execution-apis/issues/463
- https://github.com/ethereum/execution-apis/issues/523
The function added here only works with Geth-like servers that return
error code `3`. We will not be able to support all possible servers.
However, if there is a specific server implementation that makes it
possible to extract the same info, we could add it in the same function
as well.
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
`flatCallTracer` will now specify the type of a create in the action
via the `creationMethod` field.
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR fixes some issues with benchmarks
- [x] Removes log output from a log-test
- [x] Avoids a `nil`-defer in `triedb/pathdb`
- [x] Fixes some crashes re tracers
- [x] Refactors a very resource-expensive benchmark for blobpol.
**NOTE**: this rewrite touches live production code (a little bit), as
it makes the validator-function used by the blobpool configurable.
- [x] Switch some benches over to use pebble over leveldb
- [x] reduce mem overhead in the setup-phase of some tests
- [x] Marks some tests with a long setup-phase to be skipped if `-short`
is specified (where long is on the order of tens of seconds). Ideally,
in my opinion, one should be able to run with `-benchtime 10ms -short`
and sanity-check all tests very quickly.
- [x] Drops some metrics-bechmark which times the speed of `copy`.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Tests that are crucial to for verifying the verkle testnet functions properly.
---------
Signed-off-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
Co-authored-by: Ignacio Hagopian <jsign.uy@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Martin HS <martin@swende.se>
This test depends on a 100ms timer, which fails quite often, messing up
our pipelines. Hook directly into the internal version of getPayload
which has the capacity to wait for the full payload before returning.
This might not be absolutely correct from a test perspective, but it
beats failing ci. The alternative would be to expose the full build hook
into the outside, but it might be a bit overkill for this scenario.
This PR is a first step towards removing account management from geth,
and contains a lot of the user-facing changes.
With this PR, the `personal` namespace disappears. **Note**: `personal`
namespace has been deprecated for quite some time (since
https://github.com/ethereum/go-ethereum/pull/26390 1 year and 8 months
ago), and users who have wanted to use it has been forced to used the
flag `--rpc.enabledeprecatedpersonal`. So I think it's fairly
non-controversial to drop it at this point.
Specifically, this means:
- Account/wallet listing
-`personal.getListAccounts`
-`personal.listAccounts`
-`personal.getListWallets`
-`personal.listWallets`
- Lock/unlock
-`personal.lockAccount`
-`personal.openWallet`
-`personal.unlockAccount`
- Sign ops
-`personal.sign`
-`personal.sendTransaction`
-`personal.signTransaction`
- Imports / inits
-`personal.deriveAccount`
-`personal.importRawKey`
-`personal.initializeWallet`
-`personal.newAccount`
-`personal.unpair`
- Other:
-`personal.ecRecover`
The underlying keystores and account managent code is still in place,
which means that `geth --dev` still works as expected, so that e.g. the
example below still works:
```
> eth.sendTransaction({data:"0x6060", value: 1, from:eth.accounts[0]})
```
Also, `ethkey` and `clef` are untouched.
With the removal of `personal`, as far as I know we have no more API
methods which contain credentials, and if we want to implement
logging-capabilities of RPC ingress payload, it would be possible after
this.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Currently we have a custom TextMarshalerFlag. It's a nice idea, allowing
anything implementing text marshaller to be used as a flag. That said,
we only ever used it in one place because it's not that obvious how to
use and it needs some boilerplate on the type itself too, apart of the
heavy boilerplate got the custom flag.
All in all there's no *need* to drop this feature just now, but while
porting the cmds over to cli @v3, all other custom flags worker
perfectly, whereas this one started crashing deep inside the cli
package. The flag handling in v3 got rebuild on generics and there are a
number of new methods needed; and my guess is that maybe one of them
doesn't work like this flag currently is designed too.
We could definitely try and redesign this flag for cli v3... but all
that effort and boilerplate just to use it for 1 flag in 1 location,
seems not worth it. So for now I'm suggesting removing it and maybe
reconsider a similar feature in cli v3 with however it will work.
I think the core code should generally be agnostic about the witness and
the statedb layer should determine what elements need to be included in
the witness. Because code is accessed via `GetCode`, and
`GetCodeLength`, the statedb will always know when it needs to add that
code into the witness.
The edge case is block hashes, so we continue to add them manually in
the implementation of `BLOCKHASH`.
It probably makes sense to refactor statedb so we have a wrapped
implementation that accumulates the witness, but this is a simpler
change that makes #30078 less aggressive.
Looking at the cpu profile of a burntpix benchmark, I noticed that a lot
of time was spent in gas-used, in the interpreter loop. It's an actual
call (not inlined), which explicitly wants to be ignored by tracing
("tracing.GasChangeIgnored"), so it can be safely and simply inlined.
The other change is in `pushX`. These also do a call to
`common.RightPadBytes`. I replaced that by a doing a corresponding `Lsh`
on the `u256` if needed. Note: it's needed only to make the stack output
look right, for fuzzers. It technically doesn't matter what we put
there: if code ends on a pushdata immediate, nothing will consume the
stack element. We could just as well just ignore it, if we didn't care
about fuzzers (which I do).
Seems quite a lot faster on burntpix, according to my runs.
This PR:
```
EVM gas used: 5642735088
execution time: 34.84609475s
allocations: 915683
allocated bytes: 175334088
```
```
EVM gas used: 5642735088
execution time: 36.671958278s
allocations: 915701
allocated bytes: 175340528
```
Master
```
EVM gas used: 5642735088
execution time: 49.349209526s
allocations: 915684
allocated bytes: 175333368
```
```
EVM gas used: 5642735088
execution time: 46.581006598s
allocations: 915681
allocated bytes: 175330728
```
---------
Co-authored-by: Sina M <1591639+s1na@users.noreply.github.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
When using the prestateTracer, in some cases users are only concerned
with balances or nonce information, and are not interested in the lengthy
contract code or storage data.
Therefore, this PR introduces two new configuration options in the
`prestateTracerConfig` structure:
- `disableCode`
- `disableStorage`
These options allow users to control whether the tracer returns contract
code and storage data during execution tracing. By setting these
options, users can more flexibly customize their needs and focus on
obtaining information that is more critical and relevant to their
specific use cases.
These options work with the default mode as well as `diffMode: true`.
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Sina M <1591639+s1na@users.noreply.github.com>
This PR adds `DeleteRange` to `ethdb.KeyValueWriter`. While range
deletion using an iterator can be really slow, `DeleteRange` is natively
supported by pebble and apparently runs in O(1) time (typically 20-30ms
in my tests for removing hundreds of millions of keys and gigabytes of
data). For leveldb and memorydb an iterator based fallback is
implemented. Note that since the iterator method can be slow and a
database function should not unexpectedly block for a very long time,
the number of deleted keys is limited at 10000 which should ensure that
it does not block for more than a second. ErrTooManyKeys is returned if
the range has only been partially deleted. In this case the caller can
repeat the call until it finally succeeds.
previous key expired 2023-07-27, the new one expires 2026-02-22:
pub rsa4096 2016-11-11 [SC] [expires: 2026-02-22]
AE96ED969E479B0084F3E17FE88D3334FA5F6A0A
uid Ethereum Foundation Security Team <security@ethereum.org>
uid Ethereum Foundation Bug Bounty <bounty@ethereum.org>
sub rsa4096 2016-11-11 [E] [expires: 2026-02-22]
rebased https://github.com/ethereum/go-ethereum/pull/29766 . The
downstream branch appears to have been deleted and I don't have perms to
push to that fork.
`TerminalTotalDifficultyPassed` is removed. `TerminalTotalDifficulty`
must now be non-nil, and it is expected that networks are already
merged: we can only import PoW/Clique chains, not produce blocks on
them.
---------
Co-authored-by: stevemilk <wangpeculiar@gmail.com>
This PR moves the logging/tracing-facilities out of `*state.StateDB`,
in to a wrapping struct which implements `vm.StateDB` instead.
In most places, it is a pretty straight-forward change:
- First, hoisting the invocations from state objects up to the statedb.
- Then making the mutation-methods simply return the previous value, so
that the external logging layer could log everything.
Some internal code uses the direct object-accessors to mutate the state,
particularly in testing and in setting up state overrides, which means
that these changes are unobservable for the hooked layer. Thus, configuring
the overrides are not necessarily part of the API we want to publish.
The trickiest part about the layering is that when the selfdestructs are
finally deleted during `Finalise`, there's the possibility that someone
sent some ether to it, which is burnt at that point, and thus needs to
be logged. The hooked layer reaches into the inner layer to figure out
these events.
In package `vm`, the conversion from `state.StateDB + hooks` into a
hooked `vm.StateDB` is performed where needed.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Way back we've added `common.math.BigMin` and `common.math.BigMax`.
These were kind of cute helpers, but unfortunate ones, because package
all over out codebase added dependencies to this package just to avoid
having to write out 3 lines of code.
Because of this, we've also started having package name clashes with the
stdlib `math`, which got solves even more badly by moving some helpers
over ***from*** the stdlib into our custom lib (e.g. MaxUint64). The
latter ones were nuked out in a previous PR and this PR nukes out BigMin
and BigMax, inlining them at all call sites.
As we're transitioning to uint256, if need be, we can add a min and max
to that.
Clique currently depends on the `accounts` package. This was a bit of a
big cannon even in the past, just to pass a signer "account" to the
Clique block producer. Either way, nowadays Geth does not support clique
mining any more, so by removing that bit of functionality from our code,
we can also break this dependency.
Clique should ideally be further torn out, but this at least gets us one
step closer to cleanups.
While looking at some mem profiles from `evm` runs, I noticed that
`goja` compilation of the bigint library was present. The bigint library
compilation happens in a package `init`, whenever the package
`eth/tracers/js` is loaded. This PR changes it to load lazily when
needed.
It becomes slightly faster with this change, and slightly less alloc:y.
Non-scientific benchmark with 100 executions:
```
time for i in {1..100}; do ./evm --code 6040 run; done;
```
current `master`:
```
real 0m6.634s
user 0m5.213s
sys 0m2.277s
```
Without compiling bigint
```
real 0m5.802s
user 0m4.191s
sys 0m1.965s
```
Fixes an issue missed in #30576 where we send empty requests for a full
payload being resolved, causing hash mismatch later on when we get the
payload back via `NewPayload`.
Breaking changes:
- The ChainConfig was exposed to tracers via VMContext passed in
`OnTxStart`. This is unnecessary specially looking through the lens of
live tracers as chain config remains the same throughout the lifetime of
the program. It was there so that native API-invoked tracers could
access it. So instead we moved it to the constructor of API tracers.
Non-breaking:
- Change the default config of the tracers to be `{}` instead of nil.
This way an extra nil check can be avoided.
Refactoring:
- Rename `supply` struct to `supplyTracer`.
- Un-export some hook definitions.
~~Opening this as a draft to have a discussion.~~ Pressed the wrong
button
I had [a previous PR
](https://github.com/ethereum/go-ethereum/pull/24616)a long time ago
which reduced the peak memory used during reorgs by not accumulating all
transactions and logs.
This PR reduces the peak memory further by not storing the blocks in
memory.
However this means we need to pull the blocks back up from storage
multiple times during the reorg.
I collected the following numbers on peak memory usage:
// Master: BenchmarkReorg-8 10000 899591 ns/op 820154 B/op 1440
allocs/op 1549443072 bytes of heap used
// WithoutOldChain: BenchmarkReorg-8 10000 1147281 ns/op 943163 B/op
1564 allocs/op 1163870208 bytes of heap used
// WithoutNewChain: BenchmarkReorg-8 10000 1018922 ns/op 943580 B/op
1564 allocs/op 1171890176 bytes of heap used
Each block contains a transaction with ~50k bytes and we're doing a 10k
block reorg, so the chain should be ~500MB in size
---------
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
## Description
Omit null `witness` field from payload envelope.
## Motivation
Currently, JSON encoded payload types always include `"witness": null`,
which, I believe, is not intentional.
calculating a reasonable tx blob fee cap (`max_blob_fee_per_gas *
total_blob_gas`) only depends on the excess blob gas of the parent
header. The parent header is assumed to be correct, so the method should
not be able to fail and return an error.
This change brings geth into compliance with the current engine API
specification for the Prague fork. I have moved the assignment of
ExecutionPayloadEnvelope.Requests into BlockToExecutableData to ensure
there is a single place where the type is removed.
While doing so, I noticed that handling of requests in the miner was not
quite correct for the empty payload. It would return `nil` requests for
the empty payload even for blocks after the Prague fork. To fix this, I
have added the emptyRequests field in miner.Payload.
Changelog: https://golangci-lint.run/product/changelog/#1610
Removes `exportloopref` (no longer needed), replaces it with
`copyloopvar` which is basically the opposite.
Also adds:
- `durationcheck`
- `gocheckcompilerdirectives`
- `reassign`
- `mirror`
- `tenv`
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This change makes the trie commit operation concurrent, if the number of changes exceed 100.
Co-authored-by: stevemilk <wangpeculiar@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This fixes a few issues missed in #29052:
* `requests` must be hex encoded, so added a helper to marshal.
* The statedb was committed too early and so the result of the system
calls was lost.
* For devnet-4 we need to pull off the type byte prefix from the request
data.
This is a redo of #29052 based on newer specs. Here we implement EIPs
scheduled for the Prague fork:
- EIP-7002: Execution layer triggerable withdrawals
- EIP-7251: Increase the MAX_EFFECTIVE_BALANCE
Co-authored-by: lightclient <lightclient@protonmail.com>
A couple of tests set the debug level to `TRACE` on stdout,
and all subsequent tests in the same package are also affected
by that, resulting in outputs of tens of megabytes.
This PR removes such calls from two packages where it was prevalent.
This makes getting a summary of failing tests simpler, and possibly
reduces some strain from the CI pipeline.
This implements recent changes to EIP-7685, EIP-6110, and
execution-apis.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Co-authored-by: Shude Li <islishude@gmail.com>
The bulk of this PR is authored by @lightclient , in the original
EOF-work. More recently, the code has been picked up and reworked for the new EOF
specification, by @MariusVanDerWijden , in https://github.com/ethereum/go-ethereum/pull/29518, and also @shemnon has contributed with fixes.
This PR is an attempt to start eating the elephant one small bite at a
time, by selecting only the eof-validation as a standalone piece which
can be merged without interfering too much in the core stuff.
In this PR:
- [x] Validation of eof containers, lifted from #29518, along with
test-vectors from consensus-tests and fuzzing, to ensure that the move
did not lose any functionality.
- [x] Definition of eof opcodes, which is a prerequisite for validation
- [x] Addition of `undefined` to a jumptable entry item. I'm not
super-happy with this, but for the moment it seems the least invasive
way to do it. A better way might be to go back and allowing nil-items or
nil execute-functions to denote "undefined".
- [x] benchmarks of eof validation speed
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Danno Ferrin <danno.ferrin@shemnon.com>
This pull request removes the `fsync` of index files in freezer.ModifyAncients function for
performance gain.
Originally, fsync is added after each freezer write operation to ensure
the written data is truly transferred into disk. Unfortunately, it turns
out `fsync` can be relatively slow, especially on
macOS (see https://github.com/ethereum/go-ethereum/issues/28754 for more
information).
In this pull request, fsync for index file is removed as it turns out
index file can be recovered even after a unclean shutdown. But fsync for data file is still kept, as
we have no meaningful way to validate the data correctness after unclean shutdown.
---
**But why do we need the `fsync` in the first place?**
As it's necessary for freezer to survive/recover after the machine crash
(e.g. power failure).
In linux, whenever the file write is performed, the file metadata update
and data update are
not necessarily performed at the same time. Typically, the metadata will
be flushed/journalled
ahead of the file data. Therefore, we make the pessimistic assumption
that the file is first
extended with invalid "garbage" data (normally zero bytes) and that
afterwards the correct
data replaces the garbage.
We have observed that the index file of the freezer often contain
garbage entry with zero value
(filenumber = 0, offset = 0) after a machine power failure. It proves
that the index file is extended
without the data being flushed. And this corruption can destroy the
whole freezer data eventually.
Performing fsync after each write operation can reduce the time window
for data to be transferred
to the disk and ensure the correctness of the data in the disk to the
greatest extent.
---
**How can we maintain this guarantee without relying on fsync?**
Because the items in the index file are strictly in order, we can
leverage this characteristic to
detect the corruption and truncate them when freezer is opened.
Specifically these validation
rules are performed for each index file:
For two consecutive index items:
- If their file numbers are the same, then the offset of the latter one
MUST not be less than that of the former.
- If the file number of the latter one is equal to that of the former
plus one, then the offset of the latter one MUST not be 0.
- If their file numbers are not equal, and the latter's file number is
not equal to the former plus 1, the latter one is valid
And also, for the first non-head item, it must refer to the earliest
data file, or the next file if the
earliest file is not sufficient to place the first item(very special
case, only theoretical possible
in tests)
With these validation rules, we can detect the invalid item in index
file with greatest possibility.
---
But unfortunately, these scenarios are not covered and could still lead
to a freezer corruption if it occurs:
**All items in index file are in zero value**
It's impossible to distinguish if they are truly zero (e.g. all the data
entries maintained in freezer
are zero size) or just the garbage left by OS. In this case, these index
items will be kept by truncating
the entire data file, namely the freezer is corrupted.
However, we can consider that the probability of this situation
occurring is quite low, and even
if it occurs, the freezer can be considered to be close to an empty
state. Rerun the state sync
should be acceptable.
**Index file is integral while relative data file is corrupted**
It might be possible the data file is corrupted whose file size is
extended correctly with garbage
filled (e.g. zero bytes). In this case, it's impossible to detect the
corruption by index validation.
We can either choose to `fsync` the data file, or blindly believe that
if index file is integral then
the data file could be integral with very high chance. In this pull
request, the first option is taken.
Reverts ethereum/go-ethereum#30495
You are free to create a proper Clear method if that's the best way. But
one that does a proper cleanup, not some hacky call to set gas which
screws up logs, metrics and everything along the way. Also doesn't work
for legacy pool local transactions.
The current code had a hack in the simulated code, now we have a hack in
live txpooling code. No, that's not acceptable. I want the live code to
be proper, meaningful API, meaningful comments, meaningful
implementation.
Here we move the method that drops all transactions by temporarily increasing the fee
into the TxPool itself. It's better to have it there because we can set it back to the
configured value afterwards. This resolves a TODO in the simulated backend.
This PR fixes two tests, which had a tendency to sometimes write to the `*testing.T` `log` facility after the test function had completed, which is not allowed. This PR fixes it by using waitgroups to ensure that the handler/logwriter terminates before the test exits.
closes#30505
Extends the opcontext interface to include accessor for code being executed in current context. While it is possible to get the code via `statedb.GetCode`, that approach doesn't work for initcode.
In #27720, we introduced RPC global gas cap. A value of `0` means an unlimited gas cap. However, this was not the case for simulated calls. This PR fixes the behaviour.
This pull request skips the state snapshot update if the base layer is
not existent, eliminating the numerous warning logs after an unclean
shutdown.
Specifically, Geth will rewind its chain head to a historical block
after unclean shutdown and state snapshot will be remained as unchanged
waiting for recovery. During this period of time, the snapshot is unusable
and all state updates should be ignored/skipped for state snapshot update.
This is a work-around for a strange issue with travis, specifically,
`os=osx, go: 1.23.1`. When this is used, the actual go that ends up
being used is `go1.19.4 darwin/amd64 `.
Using `which go`, it told me that the `go` in the path was a softlink at
`/Users/travis/gopath/bin/go1.23.1 `. However, this was not true: using
`command -v go`, it told me that the actual `go` that was used is a
softlink at `/usr/local/bin/go`.
This change rewrites the `/usr/local/bin/go` softlink to point to the
binary at `/Users/travis/gopath/bin/go1.23.1`, so we get the right
go-version.
This PR integrates witness-enabled block production, witness-creating
payload execution and stateless cross-validation into the `engine` API.
The purpose of the PR is to enable the following use-cases (for API
details, please see next section):
- Cross validating locally created blocks:
- Call `forkchoiceUpdatedWithWitness` instead of `forkchoiceUpdated` to
trigger witness creation too.
- Call `getPayload` as before to retrieve the new block and also the
above created witness.
- Call `executeStatelessPayload` against another client to
cross-validate the block.
- Cross validating locally processed blocks:
- Call `newPayloadWithWitness` instead of `newPayload` to trigger
witness creation too.
- Call `executeStatelessPayload` against another client to
cross-validate the block.
- Block production for stateless clients (local or MEV builders):
- Call `forkchoiceUpdatedWithWitness` instead of `forkchoiceUpdated` to
trigger witness creation too.
- Call `getPayload` as before to retrieve the new block and also the
above created witness.
- Propagate witnesses across the consensus libp2p network for stateless
Ethereum.
- Stateless validator validation:
- Call `executeStatelessPayload` with the propagated witness to
statelessly validate the block.
*Note, the various `WithWitness` methods could also *just be* an
additional boolean flag on the base methods, but this PR wanted to keep
the methods separate until a final consensus is reached on how to
integrate in production.*
---
The following `engine` API types are introduced:
```go
// StatelessPayloadStatusV1 is the result of a stateless payload execution.
type StatelessPayloadStatusV1 struct {
Status string `json:"status"`
StateRoot common.Hash `json:"stateRoot"`
ReceiptsRoot common.Hash `json:"receiptsRoot"`
ValidationError *string `json:"validationError"`
}
```
- Add `forkchoiceUpdatedWithWitnessV1,2,3` with same params and returns
as `forkchoiceUpdatedV1,2,3`, but triggering a stateless witness
building if block production is requested.
- Extend `getPayloadV2,3` to return `executionPayloadEnvelope` with an
additional `witness` field of type `bytes` iff created via
`forkchoiceUpdatedWithWitnessV2,3`.
- Add `newPayloadWithWitnessV1,2,3,4` with same params and returns as
`newPayloadV1,2,3,4`, but triggering a stateless witness creation during
payload execution to allow cross validating it.
- Extend `payloadStatusV1` with a `witness` field of type `bytes` if
returned by `newPayloadWithWitnessV1,2,3,4`.
- Add `executeStatelessPayloadV1,2,3,4` with same base params as
`newPayloadV1,2,3,4` and one more additional param (`witness`) of type
`bytes`. The method returns `statelessPayloadStatusV1`, which mirrors
`payloadStatusV1` but replaces `latestValidHash` with `stateRoot` and
`receiptRoot`.
After this PR, https://github.com/ethereum/go-ethereum/pull/28187, the
way to set the default logger is different. This PR only updates the way
to set logger in some test cases' comments that existed in the codebase
(since this commit
https://github.com/ethereum/go-ethereum/commit/b63e3c37a6). Although I
am not sure if it a good way to leave the code in the comment, it truly
makes me more efficiently to debug and fix the failing test cases.
Add changes from #30409 and #29338 to changelog.
---------
Co-authored-by: Martin HS <martin@swende.se>
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
This change makes the code slightly easier for downstream-projects to extend with more signer-types, but if functionalily equivalent to the previous code.
This PR fixes what https://github.com/ethereum/go-ethereum/pull/30306/
broke. Escaping the `?` in the event sub query was fixed in that PR but
it was still escaped in the `updates` request. This PR adds a URL params
argument to `httpGet` and fixes `updates` query formatting.
Remove redundant address presence check in `makeGasSStoreFunc`.
This PR simplifies the `makeGasSStoreFunc` function by removing the
redundant check for address presence in the access list. The updated
code now only checks for slot presence, streamlining the logic and
eliminating unnecessary panic conditions.
This change removes the unnecessary address presence check, simplifying
the code and improving maintainability without affecting functionality.
The previous panic condition was intended as a canary during the testing
phases (i.e. _YOLOv2_) and is no longer needed.
h/t @MariusVanDerWijden for finding and fixing this on devnet 3.
I made the mistake of thinking `PayloadVersion` was correlated with the
`GetPayloadVX` method, but it actually tracks which version of
`PayloadAttributes` were passed to `forkchoiceUpdated`. So far, Prague
does not necessitate a new version of fcu, so there is no need for
`PayloadV4`.
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
#29995 has been reverted due to an unexpected flaw in the state snapshot
process.
Specifically, it attempts to stop the state snapshot generation, which
could potentially
cause the system to halt if the generation is not currently running.
This pull request ports the changes made in #29995 and fixes the flaw.
This PR fixes an issue with blob transaction propagation due to the blob
transation txpool rejecting transactions with gapped nonces. The
specific changes are:
- fetch transactions from a peer in the order they were announced to
minimize nonce-gaps (which cause blob txs to be rejected
- don't wait on fetching blob transactions after announcement is
received, since they are not broadcast
Testing:
- unit tests updated to reflect that fetch order should always match tx
announcement order
- unit test added to confirm blob transactions are scheduled immediately
for fetching
- running the PR on an eth mainnet full node without incident so far
---------
Signed-off-by: Roberto Bayardo <bayardo@alum.mit.edu>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This is a successor PR to #25743. This PR is based on a new iteration of
the spec: https://github.com/ethereum/execution-apis/pull/484.
`eth_multicall` takes in a list of blocks, each optionally overriding
fields like number, timestamp, etc. of a base block. Each block can
include calls. At each block users can override the state. There are
extra features, such as:
- Include ether transfers as part of the logs
- Overriding precompile codes with evm bytecode
- Redirecting accounts to another address
## Breaking changes
This PR includes the following breaking changes:
- Block override fields of eth_call and debug_traceCall have had the
following fields renamed
- `coinbase` -> `feeRecipient`
- `random` -> `prevRandao`
- `baseFee` -> `baseFeePerGas`
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This pull request replaces the field pointer in journal entry with the
field itself, specifically the address of mutated account.
While it will introduce the extra allocation cost, but it's easier for
code reading. Let's measure the overhead overall to see if the change is
acceptable or not.
This pull request introduces a state.Reader interface for state
accessing.
The interface could be implemented in various ways. It can be pure trie
only reader, or the combination of trie and state snapshot. What's more,
this interface allows us to have more flexibility in the future, e.g.
the
archive reader (for accessing archive state).
Additionally, this pull request removes the following metrics
- `chain/snapshot/account/reads`
- `chain/snapshot/storage/reads`
This PR fixes a flaky jwt-test.
The test is a jwt "from one second in the future". The test passes; the
reason for this is that the CI-system is slow, and by the time the jwt
is actually evaluated, that second has passed, and it's no longer
future.
Alternative to #30380
This PR changes how sidechains are handled.
Before the merge, it was possible to import a chain with lower td and not set it as canonical. After the merge, we expect every chain that we get via InsertChain to be canonical. Non-canonical blocks can still be inserted
with InsertBlockWIthoutSetHead.
If during the InsertChain, the existing chain is not canonical anymore, we mark it as a sidechain and send the SideChainEvents normally.
This pull request fixes a flaw in prefetcher.
In verkle tree world, both accounts and storage slots are committed into
a single tree instance for state hashing. If the prefetcher is activated, we will
try to pull the trie for the prefetcher for performance speedup.
However, we had a special logic to skip pulling storage trie if the
storage root is empty. While it's true for merkle as we have nothing to
do with an empty storage trie, it's totally wrong for verkle. The consequences
for skipping pulling is the storage changes are committed into trie A, while the
account changes are committed into trie B (pulled from the prefetcher), boom.
This PR implements changes related to
[EIP-6800](https://eips.ethereum.org/EIPS/eip-6800) and
[EIP-4762](https://eips.ethereum.org/EIPS/eip-4762) spec updates.
A TL;DR of the changes is that `Version`, `Balance`, `Nonce` and
`CodeSize` are encoded in a single leaf named `BasicData`. For more
details, see the [_Header Values_ table in
EIP-6800](https://eips.ethereum.org/EIPS/eip-6800#header-values).
The motivation for this was simplifying access event patterns, reducing
code complexity, and, as a side effect, saving gas since fewer leaf
nodes must be accessed.
---------
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR adds the bulk verkle witness+proof production at the end of block
production. It reads all data from the tree in one swoop and produces
a verkle proof.
Co-authored-by: Felix Lange <fjl@twurst.com>
When attempting to hash a typed data struct that includes a type
reference with a fixed-size array, the validation process fails.
According to EIP-712, arrays can be either fixed-size or dynamic,
denoted by `Type[n]` or `Type[]` respectively, although it appears this
currently isn't supported.
This change modifies the validation logic to accommodate types
containing fixed-size arrays.
This is a follow-up to #29520, and a preparatory PR to a more thorough
change in the journalling system.
### API methods instead of `append` operations
This PR hides the journal-implementation details away, so that the
statedb invokes methods like `JournalCreate`, instead of explicitly
appending journal-events in a list. This means that it's up to the
journal whether to implement it as a sequence of events or
aggregate/merge events.
### Snapshot-management inside the journal
This PR also makes it so that management of valid snapshots is moved
inside the journal, exposed via the methods `Snapshot() int` and
`RevertToSnapshot(revid int, s *StateDB)`.
### SetCode
JournalSetCode journals the setting of code: it is implicit that the
previous values were "no code" and emptyCodeHash. Therefore, we can
simplify the setCode journal.
### Selfdestruct
The self-destruct journalling is a bit strange: we allow the
selfdestruct operation to be journalled several times. This makes it so
that we also are forced to store whether the account was already
destructed.
What we can do instead, is to only journal the first destruction, and
after that only journal balance-changes, but not journal the
selfdestruct itself.
This simplifies the journalling, so that internals about state
management does not leak into the journal-API.
### Preimages
Preimages were, for some reason, integrated into the journal management,
despite not being a consensus-critical data structure. This PR undoes
that.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
In few tests the returned error from `SendTransaction` is not being
checked. This PR checks the returned err in tests.
Returning errors also revealed tx in `TestCommitReturnValue` is not
actually being sent, and returns err ` only replay-protected (EIP-155)
transactions allowed over RPC`. Fixed the transaction by using the
`testTx` function.
`WriteToUDP` was never called, since `meteredUdpConn` exposed directly
all the methods from the underlying `UDPConn` interface.
This fixes the `discover/egress` metric never being updated.
This pull request adds a few more performance metrics, specifically:
- The average time cost of an account read
- The average time cost of a storage read
- The rate of account reads
- The rate of storage reads
Make tracers more robust by handling `nil` receipt as input.
Also pass in a receipt with gas used in the state test runner.
Closes https://github.com/ethereum/go-ethereum/issues/30117.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This is a performance improvement on the account-creation rollback code
required for the archive node to support verkle. It uses the utility
function `DeleteAtStem` to remove code and account data per-group
instead of doing it leaf by leaf.
It also fixes an index bug, as code is chunked in 31-byte chunks, so
comparing with the code size should use 31 as its stride.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR adds the `dns:read` and `dns:edit` permissions to the required
set of permissions checked before deploying an ENR tree to Cloudflare.
These permissions are necessary for a successful publish.
**Background**:
The current logic for `devp2p dns to-cloudflare` checks for `zone:edit`
and `zone:read` permissions. However, when running the command with only
these two permissions, the following error occurs:
```
wrong permissions on zone REMOVED-ZONE: map[#zone:edit:false #zone:read:true]
```
Adding `zone:read` and `zone:edit` to the API token led to a different
error:
```
INFO [08-19|14:06:16.782] Retrieving existing TXT records on pos-nodes.hardfork.dev
Authentication error (10000)
```
This suggested that additional permissions were required. I added
`dns:read`, but encountered another error:
```
INFO [08-19|14:11:42.342] Retrieving existing TXT records on pos-nodes.hardfork.dev
INFO [08-19|14:11:42.851] Updating DNS entries
failed to publish REMOVED.pos-nodes.hardfork.dev: Authentication error (10000)
```
Finally, after adding both `dns:read` and `dns:edit` permissions, the
command executed successfully with the following output:
```
INFO [08-19|14:13:07.677] Checking Permissions on zone REMOVED-ZONE
INFO [08-19|14:13:08.014] Retrieving existing TXT records on pos-nodes.hardfork.dev
INFO [08-19|14:13:08.440] Updating DNS entries
INFO [08-19|14:13:08.440] "Updating pos-nodes.hardfork.dev from \"enrtree-root:v1 e=FSED3EDKEKRDDFMCLP746QY6CY l=FDXN3SN67NA5DKA4J2GOK7BVQI seq=1 sig=Glja2c9RviRqOpaaHR0MnHsQwU76nJXadJwFeiXpp8MRTVIhvL0LIireT0yE3ETZArGEmY5Ywz3FVHZ3LR5JTAE\" to \"enrtree-root:v1 e=AB66M4ULYD5OYN4XFFCPVZRLUM l=FDXN3SN67NA5DKA4J2GOK7BVQI seq=1 sig=H8cqDzu0FAzBplK4g3yudhSaNtszIebc2aj4oDm5a5ZE5PAg-xpCnQgVE_53CsgsqQpalD9byafx_FrUT61sagA\""
INFO [08-19|14:13:16.932] Updated DNS entries new=32 updated=1 untouched=100
INFO [08-19|14:13:16.932] Deleting stale DNS entries
INFO [08-19|14:13:24.663] Deleted stale DNS entries count=31
```
With this PR, the required permissions for deploying an ENR tree to
Cloudflare now include `zone:read`, `zone:edit`, `dns:read`, and
`dns:edit`. The initial check now includes all of the necessary
permissions and indicates in the error message which permissions are
missing:
```
INFO [08-19|14:17:20.339] Checking Permissions on zone REMOVED-ZONE
wrong permissions on zone REMOVED-ZONE: map[#dns_records:edit:false #dns_records:read:false #zone:edit:false #zone:read:true]
```
This PR updates the version of go used in builds and docker to
1.23.0. Release notes: https://go.dev/doc/go1.23
More importantly, following our policy of maintaining the last two
versions (which now becomes 1.23 and 1.22), we can now make use of
the things that were introduced in 1.22: https://go.dev/doc/go1.22
Go 1.22 makes two changes to “for” loops.
- each iteration creates new variables,
- for loops may range over integers
Other than that, some interesting library changes and other stuff.
This PR implements the conclusions from
https://github.com/ethereum/go-ethereum/issues/28987#issuecomment-2296075028,
that is:
Building with `--strip-all` as a ld-flag to the cgo linker, to remove
symbols. Without that, some spurious reference to a temporary file is
included into the kzg-related library.
Building with `--build-id=none`, to avoid putting a `build id` into the file.
closes#29475, replaces #29657, #30104
Fixes two issues. First is a deadlock where the txpool attempts to reorg, but can't complete because there are no readers left for the new txs subscription. Second, resolves a problem with on demand mode where txs may be left pending when there are more pending txs than block space.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Our `WriteArchive`, used by ci builder, creates files in the repo root,in order to upload. After we've built the amd64-builds, we create the uploads, and cause the repo to be flagged as dirty for the remaining builds.
This change fixes it by adding the artefacts to gitignore. Closes#30324
When we are building in detached head, we cannot easily obtain the same information as we can if we're in non-detached head.
However, one thing we _can_ obtain is the git-hash and git-date. Currently, we omit to include the git-date into the build-info, which causes problem for reproducable builds which are on a detached head.
This change fixes it to include the date-info always.
To allow all error paths in `vm.EVM.create()` to consume the necessary
gas, there is currently a pattern of gating code on `if err == nil`
instead of returning as soon as the error occurs. The same behaviour can
be achieved by abstracting the gated code into a method that returns
immediately on error, improving readability and thus making it easier to
understand and maintain.
Here I am adding a discv5 nodes source into the p2p dial iterator. It's
an improved version of #29533.
Unlike discv4, the discv5 random nodes iterator will always provide full
ENRs. This means we can apply filtering to the results and will only try
dialing nodes which explictly opt into the eth protocol with a matching
chain.
I have also removed the dial iterator from snap. We don't have an
official DNS list for snap anymore, and I doubt anyone else is running
one. While we could potentially filter for snap on discv5, there will be
very few nodes announcing it, and the extra iterator would just stall
the dialer.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Add coinbase address to javascript tracer context.
This PR adds the `coinbase` address to `jsTracer.ctx`, allowing access
to the coinbase address (fee receipient) in custom JavaScript tracers.
Example usage:
```javascript
result: function(ctx) {
return toAddress(ctx.coinbase);
}
```
This change enables custom tracers to access coinbase address,
previously unavailable, enhancing their capabilities to match built-in
tracers.
This pull request drops the legacy transaction retrieval support from before
eth68, adding the restrictions that transaction metadata must be provided
along with the transaction announment.
This PR refactors the genesis initialization a bit, s.th. we only
compute the blockhash once instead of twice as before (during hashAlloc
and flushAlloc)
This will significantly reduce the amount of memory allocated during
genesis init
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This pull request fixes#30229.
During snap sync, large storage will be split into several pieces and
synchronized concurrently. Unfortunately, the tradeoff is that the respective
merkle trie of each storage chunk will be incomplete due to the incomplete
boundaries. The trie nodes on these boundaries will be discarded, and any
dangling nodes on disk will also be removed if they fall on these paths,
ensuring the state healer won't be blocked.
However, the dangling account trie nodes on the path from the root to the
associated account are left untouched. This means the dangling account trie
nodes could potentially stop the state healing and break the assumption that the
entire subtrie should exist if the subtrie root exists. We should consider the
account trie node as the ancestor of the corresponding storage trie node.
In the scenarios described in the above ticket, the state corruption could occur
if there is a dangling account trie node while some storage trie nodes are
removed due to synchronization redo.
The fixing idea is pretty straightforward, the trie nodes on the path from root
to account should all be explicitly removed if an incomplete storage trie
occurs. Therefore, a `delete` operation has been added into `gentrie` to
explicitly clear the account along with all nodes on this path. The special
thing is that it's a cross-trie clearing. In theory, there may be a dangling
node at any position on this account key and we have to clear all of them.
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: lightclient <lightclient@protonmail.com>
Fixes a slight miscalculation in the downloader queue, which was not accurately taking block withdrawals into account when calculating the size of the items in the queue
Due to https://github.com/ethereum/tests/releases/tag/v10.1, the format
of the TransactionTest changed, but it was not properly addressed, causing the test
to pass unexpectedly.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
Consistently use `uint64` for indices in `Memory` and drop lots of type
conversions from `uint64` to `int64`.
---------
Co-authored-by: lmittmann <lmittmann@users.noreply.github.com>
Some chains’ network IDs use hexadecimal such as Optimism ("0xa" instead
of "10"), so when converting the string to big.Int, we cannot specify
base 10; otherwise, it will encounter errors with hexadecimal network
IDs.
The struct-based tracing added in #29189 seems to have caused an issue
with the benchmark `BenchmarkTracerStepVsCallFrame`. On master we see
the following panic:
```console
BenchmarkTracerStepVsCallFrame
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x2 addr=0x40 pc=0x1019782f0]
goroutine 37 [running]:
github.com/ethereum/go-ethereum/eth/tracers/js.(*jsTracer).OnOpcode(0x140004c4000, 0x0, 0x10?, 0x989680, 0x1, {0x101ea2298, 0x1400000e258}, {0x1400000e258?, 0x14000155928?, 0x10173020c?}, ...)
/Users/matt/dev/go-ethereum/eth/tracers/js/goja.go:328 +0x140
github.com/ethereum/go-ethereum/core/vm.(*EVMInterpreter).Run(0x14000307da0, 0x140003cc0d0, {0x0, 0x0, 0x0}, 0x0)
...
FAIL github.com/ethereum/go-ethereum/core/vm/runtime 0.420s
FAIL
```
The issue seems to be that `OnOpcode` expects that `OnTxStart` has
already been called to initialize the `env` value in the tracer. The JS
tracer uses it in `OnOpcode` for the `GetRefund()` method.
This patch resolves the issue by reusing the `Call` method already
defined in `runtime_test.go` which correctly calls `OnTxStart`.
Fixes#30254
It seems like the removed CreateAccount call is very old and not needed anymore.
After removing it, setting a sender that does not exist in the state doesn't seem to cause
an issue.
Adding the correct accessList parameter when calling a contract can
reduce gas consumption. However, the current version only allows adding
the accessList manually when constructing the transaction. This PR can
provide convenience for saving gas.
The package `github.com/golang/protobuf/proto` is deprecated in favor
`google.golang.org/protobuf/proto`. We should update the codes to
recommended package.
Signed-off-by: Icarus Wu <icaruswu66@qq.com>
This PR fixes an issue in the setMode method of beaconBackfiller where the
log message was not displaying the previous mode correctly. The log message
now shows both the old and new sync modes.
## Issue
If `nextTime` has passed, but all nodes are excluded, `get` would return
`nil` and `run` would therefore not invoke `schedule`. Then, we schedule
a timer for the past, as neither `nextTime` value has been updated. This
creates a busy loop, as the timer immediately returns.
## Fix
With this PR, revalidation will be also rescheduled when all nodes are
excluded.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
The test specifies `ListenAddr: ":0"`, which means a random ephemeral
port will be chosen for the TCP listener by the OS. Additionally, since
no `DiscAddr` was specified, the same port that is chosen automatically
by the OS will also be used for the UDP listener in the discovery UDP
setup. This sometimes leads to test failures if the TCP listener picks a
free TCP port that is already taken for UDP. By specifying `DiscAddr:
":0"`, the UDP port will be chosen independently from the TCP port,
fixing the random failure.
See issue #29830.
Verified using
```
cd p2p
go test -c -race
stress ./p2p.test -test.run=TestServerPortMapping
...
5m0s: 4556 runs so far, 0 failures
```
The issue described above can technically lead to sporadic failures on
systems that specify a listen address via the `--port` flag of 0 while
not setting `--discovery.port`. Since the default is using port `30303`
and using a random ephemeral port is likely not used much to begin with,
not addressing the root cause might be acceptable.
This pull request fixes the broken feature where the entire storage set is overridden.
Originally, the storage set override was achieved by marking the associated account
as deleted, preventing access to the storage slot on disk. However, since #29520, this
flag is also checked when accessing the account, rendering the account unreachable.
A fix has been applied in this pull request, which re-creates a new state object with all
account metadata inherited.
Currently, we have 3 flags to configure blob pool. However, we don't
read these flags and set the blob pool configuration in eth config
accordingly. This commit adds a function to check if these flags are
provided and set blob pool configuration based on them.
This pull request adds an additional error check after statedb.IntermediateRoot,
ensuring that no errors occur during this call. This step is essential, as the call might
encounter database errors.
The address recover is executed and cached in ValidateTransaction already. It's
expected that the cached one is returned in ValidateTransaction. However,
currently, we use the wrong function signer.Sender instead of types.Sender which
will do all the address recover again.
Here we add distinct error messages for network timeouts and JSON parsing errors.
Note this specifically applies to HTTP connections serving a single RPC request.
Co-authored-by: Felix Lange <fjl@twurst.com>
Originally, these metrics were added to track the largest storage wiping.
Since account self-destruction was deprecated with the Cancun fork,
these metrics have become meaningless.
This does not change the behavior here as the nonce in the argument is
tx.Nonce(). This commit helps to make the function easier to read and avoid
capturing the tx in the function.
* all: add stateless verifications
* all: simplify witness and integrate it into live geth
---------
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* avoid unnecessary copy
* delete the never used function ProofList
* eth/protocols/snap, trie/trienode: polish the code
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Since Decimal is defined as unsiged `uint64`, we should use `strconv.ParseUint` instead of `strconv.ParseInt` during unmarshalling.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
* cmd/geth, ethdb/pebble: polish method naming and code comment
* implement db stat for pebble
* cmd, core, ethdb, internal, trie: remove db property selector
* cmd, core, ethdb: fix function description
---------
Co-authored-by: prpeh <prpeh@proton.me>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
* beacon/light/request: add server test for event after unsubscribe
* beacon/light/api: fixed double stream.Close()
* beacon/light/request: add checks for nil event callback function
* beacon/light/request: unlock server mutex while unsubscribing from parent
* .golangci.yml: enable check for consistent receiver name
* beacon/light/sync: fix receiver name
* core/txpool/blobpool: fix receiver name
* core/types: fix receiver name
* internal/ethapi: use consistent receiver name 'api' for handler object
* signer/core/apitypes: fix receiver name
* signer/core: use consistent receiver name 'api' for handler object
* log: fix receiver name
enode.Node was recently changed to store a cache of endpoint information. The IP address in the cache is a netip.Addr. I chose that type over net.IP because it is just better. netip.Addr is meant to be used as a value type. Copying it does not allocate, it can be compared with ==, and can be used as a map key.
This PR changes most uses of Node.IP() into Node.IPAddr(), which returns the cached value directly without allocating.
While there are still some public APIs left where net.IP is used, I have converted all code used internally by p2p/discover to the new types. So this does change some public Go API, but hopefully not APIs any external code actually uses.
There weren't supposed to be any semantic differences resulting from this refactoring, however it does introduce one: In package p2p/netutil we treated the 0.0.0.0/8 network (addresses 0.x.y.z) as LAN, but netip.Addr.IsPrivate() doesn't. The treatment of this particular IP address range is controversial, with some software supporting it and others not. IANA lists it as special-purpose and invalid as a destination for a long time, so I don't know why I put it into the LAN list. It has now been marked as special in p2p/netutil as well.
This pull request fixes the pre-order trie traversal by defining
a more accurate iterator order and path comparison rule.
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Always prefetch the account trie while starting the prefetcher.
Co-authored-by: steven <steven@stevendeMacBook-Pro.local>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Introduces the first built-in live tracer. The supply tracer tracks ETH supply changes across blocks
and writes the output to disk. This will need to be enabled through CLI using the `--vmtrace supply` flag.
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This should fix an occasional test failure in ethclient/simulated.TestForkResendTx.
Inspection of logs revealed the cause of the failure to be that the txpool was not done
reorganizing by the time Fork is called.
Here we clean up internal uses of type discover.node, converting most code to use
enode.Node instead. The discover.node type used to be the canonical representation of
network hosts before ENR was introduced. Most code worked with *node to avoid conversions
when interacting with Table methods. Since *node also contains internal state of Table and
is a mutable type, using *node outside of Table code is prone to data races. It's also
cleaner not having to wrap/unwrap *enode.Node all the time.
discover.node has been renamed to tableNode to clarify its purpose.
While here, we also change most uses of net.UDPAddr into netip.AddrPort. While this is
technically a separate refactoring from the *node -> *enode.Node change, it is more
convenient because *enode.Node handles IP addresses as netip.Addr. The switch to package
netip in discovery would've happened very soon anyway.
The change to netip.AddrPort stops at certain interface points. For example, since package
p2p/netutil has not been converted to use netip.Addr yet, we still have to convert to
net.IP/net.UDPAddr in a few places.
Create the directory before NewKeyStore. This ensures the watcher successfully starts on
the first attempt, and waitWatcherStart functions as intended.
It seems the semantic differences between addFoundNode and addInboundNode were lost in
#29572. My understanding is addFoundNode is for a node you have not contacted directly
(and are unsure if is available) whereas addInboundNode is for adding nodes that have
contacted the local node and we can verify they are active.
handleAddNode seems to be the consolidation of those two methods, yet it bumps the node in
the bucket (updating it's IP addr) even if the node was not an inbound. This PR fixes
this. It wasn't originally caught in tests like TestTable_addSeenNode because the
manipulation of the node object actually modified the node value used by the test.
New logic is added to reject non-inbound updates unless the sequence number of the
(signed) ENR increases. Inbound updates, which are published by the updated node itself,
are always accepted. If an inbound update changes the endpoint, the node will be
revalidated on an expedited schedule.
Co-authored-by: Felix Lange <fjl@twurst.com>
In #29572, I assumed the revalidation list that the node is contained in could only ever
be changed by the outcome of a revalidation request. But turns out that's not true: if the
node gets removed due to FINDNODE failure, it will also be removed from the list it is in.
This causes a crash.
The invariant is: while node is in table, it is always in exactly one of the two lists. So
it seems best to store a pointer to the current list within the node itself.
This pull request fixes the flay test TestSkeletonSyncRetrievals. In this test, we first
trigger a sync cycle and wait for it to meet certain expectations. We then inject a new
head and potentially also a new peer, then perform another final sync. The test now
performs the newPeer addition before launching the final sync, and waits a bit for that
peer to get registered. This fixes the logic race that made the test fail sometimes.
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
enode.Node has separate accessor functions for getting the IP, UDP port and TCP port.
These methods performed separate checks for attributes set in the ENR.
With this PR, the accessor methods will now return cached information, and the endpoint is
determined when the node is created. The logic to determine the preferred endpoint is now
more correct, and considers how 'global' each address is when both IPv4 and IPv6 addresses
are present in the ENR.
Node discovery periodically revalidates the nodes in its table by sending PING, checking
if they are still alive. I recently noticed some issues with the implementation of this
process, which can cause strange results such as nodes dropping unexpectedly, certain
nodes not getting revalidated often enough, and bad results being returned to incoming
FINDNODE queries.
In this change, the revalidation process is improved with the following logic:
- We maintain two 'revalidation lists' containing the table nodes, named 'fast' and 'slow'.
- The process chooses random nodes from each list on a randomized interval, the interval being
faster for the 'fast' list, and performs revalidation for the chosen node.
- Whenever a node is newly inserted into the table, it goes into the 'fast' list.
Once validation passes, it transfers to the 'slow' list. If a request fails, or the
node changes endpoint, it transfers back into 'fast'.
- livenessChecks is incremented by one for successful checks. Unlike the old implementation,
we will not drop the node on the first failing check. We instead quickly decay the
livenessChecks give it another chance.
- Order of nodes in bucket doesn't matter anymore.
I am also adding a debug API endpoint to dump the node table content.
Co-authored-by: Martin HS <martin@swende.se>
This fixes an issue for `debug_traceBlock*` methods where the BASEFEE opcode was returning always 0. This caused the method return invalid results.
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
It's a bit confusing to add msg.value into the balanceCheck within the conditional.
No impact on block validation since GasFeeCap is always set when processing transactions.
* core/state: trie prefetcher change: calling trie() doesn't stop the associated subfetcher
Co-authored-by: Martin HS <martin@swende.se>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* core/state: improve prefetcher
* core/state: restore async prefetcher stask scheduling
* core/state: finish prefetching async and process storage updates async
* core/state: don't use the prefetcher for missing snapshot items
* core/state: remove update concurrency for Verkle tries
* core/state: add some termination checks to prefetcher async shutdowns
* core/state: differentiate db tries and prefetched tries
* core/state: teh teh teh
---------
Co-authored-by: Jared Wasinger <j-wasinger@hotmail.com>
Co-authored-by: Martin HS <martin@swende.se>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Added a start/end system where tracer can be notified that processing of some Ethereum system calls is starting processing and also notifies it when the processing has completed.
Doing a start/end for system call will enable tracers to "route" incoming next tracing events to go to a separate bucket than other EVM calls. Those not interested by this fact can simply avoid registering the hooks.
The EVM call is going to be traced normally afterward between the signals provided by those 2 new hooks but outside of a transaction context OnTxStart/End. That something implementors of live tracers will need to be aware of (since only "trx tracers" are not concerned by ProcessBeaconRoot).
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
* core/state, internal/workerpool: parallelize parts of state commit
* core, internal: move workerpool into syncx
* core/state: use errgroups, commit accounts concurrently
* core: resurrect detailed commit timers to almost-accuracy
* all: refactor so NewBlock(..) and WithBody(..) take a types.Body
* core: fixup comments, remove txs != receipts panic
* core/types: add empty withdrawls to body if len == 0
This PR fixes some flaws with the existing tests.
The randomized testing (TestSnapshotRandom) executes a series of steps which modify the state and create journal-events. Later on, we compare the forward-going-states against the backwards-unrolling-journal-states, and check that they are identical.
The "identical" check is performed using various accessors. It turned out that we failed to check some things:
- the accesslist contents
- the transient storage contents
- the 'newContract' flag
- the dirty storage map
This change adds these new checks
Currently our state journal tracks each storage update to a contract, having the ability to revert those changes to the previously set value.
For the very first modification however, it behaves a bit wonky. Reverting the update doesn't actually remove the dirty-ness of the slot, rather leaves it as "change this slot to it's original value". This can cause issues down the line with for example write witnesses needing to gather an unneeded proof.
This PR modifies the storageChange journal entry to not only track the previous value of a slot, but also whether there was any previous value at all set in the current execution context. In essence, the PR changes the semantic of storageChange so it does not simply track storage changes, rather it tracks dirty storage changes, an important distinction for being able to cleanly revert the journal item.
This change adds a testcase and fixes a corner-case in the skeleton sync.
With this change, when doing the skeleton cleanup, we check if the filled header is acually within the range of what we were meant to backfill. If not, it means the backfill was a noop (possibly because we started and stopped it so quickly that it didn't have time to do any meaningful work). In that case, just don't clean up anything.
---------
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
The beacon root when applied in `state_processor.go` is performed right before executing transaction. That means that contract reliying on this value would query the same value found in the block header.
In that spirit, it means that any tracing/operation relying on state data which touches transaction must have updated the beacon root before any transaction processing.
This PR adds an extra mechanism to sync.HeadSync that tries to retrieve the latest finality update from every server each time it sends an optimistic update in a new epoch (unless we already have a validated finality update attested in the same epoch).
Note that this is not necessary and does not happen if the new finality update is delivered before the optimistic update. The spec only mandates light_client_finality_update events when a new epoch is finalized. If the chain does not finalize for a while then we might need an explicit request that returns a finality proof that proves the same finality epoch from the latest attested epoch.
This change fixes three flaky tests `TestEth2AssembleBlock`,`TestEth2NewBlock`, `TestEth2PrepareAndGetPayload` and `TestDisable`.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This change removes support for subscribing to pending logs.
"Pending logs" were always an odd feature, because it can never be fully reliable. When support for it was added many years ago, the intention was for this to be used by wallet apps to show the 'potential future token balance' of accounts, i.e. as a way of notifying the user of incoming transfers before they were mined. In order to generate the pending logs, the node must pick a subset of all public mempool transactions, execute them in the EVM, and then dispatch the resulting logs to API consumers.
* beacon/blsync: proceed with empty finalized hash if proof is not expected soon
* Update beacon/blsync/block_sync.go
Co-authored-by: Felix Lange <fjl@twurst.com>
* beacon/blsync: fixed linter warning
* Update beacon/blsync/block_sync.go
Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com>
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com>
This PR updates the bls contracts from our internal implementation which is an unmaintained fork of the kilic library to the gnark-crypto library that is actively maintained by consensys.
It also updates the gas-costs according to the EIP
This pull request defines a gentrie for snap sync purpose.
The stackTrie is used to generate the merkle tree nodes upon receiving a state batch. Several additional options have been added into stackTrie to handle incomplete states (either missing states before or after).
In this pull request, these options have been relocated from stackTrie to genTrie, which serves as a wrapper for stackTrie specifically for snap sync purposes.
Further, the logic for managing incomplete state has been enhanced in this change. Originally, there are two cases handled:
- boundary node filtering
- internal (covered by extension node) node clearing
This changes adds one more:
- Clearing leftover nodes on the boundaries.
This feature is necessary if there are leftover trie nodes in database, otherwise node inconsistency may break the state healing.
time.After is equivalent to NewTimer(d).C, and does not call Stop if the timer is no longer needed. This can cause memory leaks. This change changes many such occations to use NewTimer instead, and calling Stop once the timer is no longer needed.
* use generic atomic types in tx caches
* use generic atomic types in block caches
* eth/catalyst: avoid copying tx in test
---------
Co-authored-by: lmittmann <lmittmann@users.noreply.github.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
Adds a flag `--trace.callframes` to t8n which will log info when entering or exiting a call frame in addition to the execution steps.
---------
Co-authored-by: Mario Vega <marioevz@gmail.com>
This addresses an edge-case (detailed in the code comment) where the computation of the intermediate trie root would force the unnecessary resolution of a hash node. The change makes it so that when we process changes from a block, we first process trie-updates and afterwards process trie-deletions.
Before, `ToMessage` was returning both the resulting `Message` and an error while no error is returned now.
Those error checks were probably leftover from the past.
The StartHeadListener method will only be called once. So it can't just make one attempt
to connect to the eventsource endpoint, it has to keep trying. Note that once the stream
is established, the eventsource implementation itself will keep retrying.
Here we add a Go API for running tracing plugins within the main block import process.
As an advanced user of geth, you can now create a Go file in eth/tracers/live/, and within
that file register your custom tracer implementation. Then recompile geth and select your tracer
on the command line. Hooks defined in the tracer will run whenever a block is processed.
The hook system is defined in package core/tracing. It uses a struct with callbacks, instead of
requiring an interface, for several reasons:
- We plan to keep this API stable long-term. The core/tracing hook API does not depend on
on deep geth internals.
- There are a lot of hooks, and tracers will only need some of them. Using a struct allows you
to implement only the hooks you want to actually use.
All existing tracers in eth/tracers/native have been rewritten to use the new hook system.
This change breaks compatibility with the vm.EVMLogger interface that we used to have.
If you are a user of vm.EVMLogger, please migrate to core/tracing, and sorry for breaking
your stuff. But we just couldn't have both the old and new tracing APIs coexist in the EVM.
---------
Co-authored-by: Matthieu Vachon <matthieu.o.vachon@gmail.com>
Co-authored-by: Delweng <delweng@gmail.com>
Co-authored-by: Martin HS <martin@swende.se>
This pull request introduces a database tool for inspecting the state history.
It can be used for either account history or storage slot history, within a
specific block range.
The state output format can be chosen either with
- the "rlp-encoded" values (those inserted into the merkle trie)
- the "rlp-decoded" value (the raw state value)
The latter one needs --raw flag.
This adds support for the Deneb beacon chain fork, and fork handling
in general, to the beacon chain light client implementation.
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
This changes makes it so that when `evm statetest` executes, regardless of whether `--json` is specified or not, the stateroot is printed on `stderr` as a `jsonl` line. This enables speedier execution of testcases in goevmlab, in cases where full execution op-by-op is not required.
Since Go 1.22 has deprecated certain elliptic curve operations, this PR removes
references to the affected functions and replaces them with a custom implementation
in package crypto. This causes backwards-incompatible changes in some places.
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Felix Lange <fjl@twurst.com>
Package filepath implements utility routines for manipulating filename paths in a way compatible with the target operating system-defined file paths.
Package path implements utility routines for manipulating slash-separated paths.
The path package should only be used for paths separated by forward slashes, such as the paths in URLs
Here we add a beacon chain light client for use by geth.
Geth can now be configured to run against a beacon chain API endpoint,
without pointing a CL to it. To set this up, use the `--beacon.api` flag. Information
provided by the beacon chain is verified, i.e. geth does not blindly trust the beacon
API endpoint in this mode. The root of trust are the beacon chain 'sync committees'.
The configured beacon API endpoint must provide light client data. At this time, only
Lodestar and Nimbus provide the necessary APIs.
There is also a standalone tool, cmd/blsync, which uses the beacon chain light client
to drive any EL implementation via its engine API.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
* miner: untangle miner
* miner: use common.hash instead of *types.header
* cmd/geth: deprecate --mine
* eth: get rid of most miner api
* console: get rid of coinbase in welcome message
* miner/stress: get rid of the miner stress test
* eth: get rid of miner.setEtherbase
* ethstats: remove miner and hashrate flags
* ethstats: remove miner and hashrate flags
* cmd: rename pendingBlockProducer to miner.pending.feeRecipient flag
* miner: use pendingFeeRecipient instead of etherbase
* miner: add mutex to protect the pending block
* miner: add mutex to protect the pending block
* eth: get rid of etherbase mentions
* miner: no need to lock the coinbase
* eth, miner: fix linter
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* eth: drop support for forward sync triggers and head block packets
* consensus, eth: enforce always merged network
* eth: fix tx looper startup and shutdown
* cmd, core: fix some tests
* core: remove notion of future blocks
* core, eth: drop unused methods and types
* internal/jsre: format receipt.{blobGasPrice,blobGasUsed} to int
Signed-off-by: jsvisa <delweng@gmail.com>
* internal/jsre: format tx.maxFeePerBlobGas to int
Signed-off-by: jsvisa <delweng@gmail.com>
* internal/jsre: format blob* in block
Signed-off-by: jsvisa <delweng@gmail.com>
---------
Signed-off-by: jsvisa <delweng@gmail.com>
As SELF-DESTRUCT opcode is disabled in the cancun fork(unless the
account is created within the same transaction, nothing to delete
in this case). The account will only be deleted in the following
cases:
- The account is created within the same transaction. In this case
the original storage was empty.
- The account is empty(zero nonce, zero balance, zero code) and
is touched within the transaction. Fortunately this kind of accounts
are not-existent on ethereum-mainnet.
All in all, after cancun, we are pretty sure there is no large contract
deletion and we don't need this mechanism for oom protection.
The prestateTracer was reporting an inaccurate nonce for the contract being created in
post EIP-158 transactions. Correct nonce is 0, due to the issue nonce was being reported as 1.
* eth: make transaction propagation paths in the network deterministic
* eth: avoid potential division by 0
* eth: make tx propagation dependent on local node id too
* eth: fix review comments
* core/txpool: no need to run rotate if no local txs
Signed-off-by: jsvisa <delweng@gmail.com>
* Revert "core/txpool: no need to run rotate if no local txs"
This reverts commit 17fab17388.
Signed-off-by: jsvisa <delweng@gmail.com>
* use Debug if todo is empty
Signed-off-by: jsvisa <delweng@gmail.com>
---------
Signed-off-by: jsvisa <delweng@gmail.com>
* make blobpool reject blob transactions with fee below the minimum
* core/txpool: some minot nitpick polishes and unified error formats
* core/txpool: do less big.Int constructions with the min blob cap
---------
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This PR enhances eth_createAccessList RPC call to support scenarios where the node is launched with an unlimited gas cap (--rpc.gascap 0). The eth_createAccessList RPC call returns failure if user doesn't explicitly set a gas limit.
eth_call and debug_traceCall allow users to override various block fields, among them base fee. However the overriden base fee was not considered for computing the effective gas price of that message, and instead base fee of the base block was used. This has been fixed in this commit.
This PR fixes an overflow which can could happen if inconsistent blockchain rules were configured. Additionally, it tries to prevent such inconsistencies from occurring by making sure that merge cannot be enabled unless previous fork(s) are also enabled.
* core/txpool, miner: speed up blob pool pending retrievals
* miner: fix test merge issue
* eth: same same
* core/txpool/blobpool: speed up blobtx creation in benchmark a bit
* core/txpool/blobpool: fix linter
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
This pull request fixes a flaw in ethstats which can lead to node crash
A panic could happens when the local blockchain is reorging which causes the original head block not to be reachable (since number->hash canonical mapping is deleted). In order to prevent the panic, the block nilness is now checked in ethstats.
Improving two things here:
On hive, where we look at these tests, the Go code comment above the test
is not visible. When there is a failure, it's not obvious what the test is actually
expecting. I have converted the comments in to printed log messages to
explain the test more.
Second, I noticed that besu is failing some tests because it happens to request
a header when we want it to send transactions. Trying the minimal fix here to
serve the headers.
Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com>
This change makes the legacy transaction pool use of `uint256.Int` instead of `big.Int`. The changes are made primarily only on the internal functions of legacypool.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
As mentioned in #26621, the block index format for era1 is not in line with the regular era block index. This change modifies the index so all relative offsets are based against the beginning of the block index record.
This change adds support for blob-transaction in certain API-endpoints, e.g. eth_fillTransaction. A follow-up PR will add support for signing such transactions.
* all: implement era format, add history importer/export
* internal/era/e2store: refactor e2store to provide ReadAt interface
* internal/era/e2store: export HeaderSize
* internal/era: refactor era to use ReadAt interface
* internal/era: elevate anonymous func to named
* cmd/utils: don't store entire era file in-memory during import / export
* internal/era: better abstraction between era and e2store
* cmd/era: properly close era files
* cmd/era: don't let defers stack
* cmd/geth: add description for import-history
* cmd/utils: better bytes buffer
* internal/era: error if accumulator has more records than max allowed
* internal/era: better doc comment
* internal/era/e2store: rm superfluous reader, rm superfluous testcases, add fuzzer
* internal/era: avoid some repetition
* internal/era: simplify clauses
* internal/era: unexport things
* internal/era,cmd/utils,cmd/era: change to iterator interface for reading era entries
* cmd/utils: better defer handling in history test
* internal/era,cmd: add number method to era iterator to get the current block number
* internal/era/e2store: avoid double allocation during write
* internal/era,cmd/utils: fix lint issues
* internal/era: add ReaderAt func so entry value can be read lazily
Co-authored-by: lightclient <lightclient@protonmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* internal/era: improve iterator interface
* internal/era: fix rlp decode of header and correctly read total difficulty
* cmd/era: fix rebase errors
* cmd/era: clearer comments
* cmd,internal: fix comment typos
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
* eth, miner: fix enforcing the minimum miner tip
* ethclient/simulated: fix failing test due the min tip change
* accounts/abi/bind: fix simulater gas tip issue
* core/txpool/blobpool: clean up resurrected junk after a crash
* core/txpool/blobpool: track transaction insertions and rejections
* core/txpool/blobpool: linnnnnnnt
* eth/downloader: fix skeleton cleanup
* eth/downloader: short circuit if nothing to delete
* eth/downloader: polish the logic in cleanup
* eth/downloader: address comments
At some point, `ForkchoiceUpdatedV2` stopped working for `PayloadAttributesV1` while `paris` was active. This was causing a few failures in hive. This PR fixes that, and also adds a gate in `ForkchoiceUpdatedV1` to disallow `PayloadAttributesV3`.
GetPayloadVX should only return payloads which match its version. GetPayloadV2 is a special snowflake that supports v1 and v2 payloads. This change uses a a version-specific prefix within in the payload id, basically a namespace for the version number.
This PR fixes an issues in the new simulated backend. The root cause is the fact that the transaction pool has an internal reset operation that runs on a background thread.
When a new transaction is added to the pool via the RPC, the transaction is added to a non-executable queue and will be moved to its final location on a background thread. If the machine is overloaded (or simply due to timing issues), it can happen that the simulated backend will try to produce the next block, whilst the pool has not yet marked the newly added transaction executable. This will cause the block to not contain the transaction. This is an issue because we want determinism from the simulator: add a tx, mine a block. It should be in there.
The PR fixes it by adding a Sync function to the txpool, which waits for the current reset operation (if any) to finish, and then runs an entire round of reset on top. The new round is needed because resets are only triggered by new head events, so newly added transactions will not trigger the outer resets that we can wait on. The transaction pool would eventually internally do a reset even on transaction addition, but there's no easy way to wait on that and there's no meaningful reason to bubble that across everything. A clean outer reset will at worse be a small noop goroutine.
This PR introduces a few changes with respect to payload verification in fcu and new payload requests:
* First of all, it undoes the `verifyPayloadAttributes(..)` simplification I attempted in #27872.
* Adds timestamp validation to fcu payload attributes [as required](https://github.com/ethereum/execution-apis/blob/main/src/engine/cancun.md#specification-1) (section 2) by the Engine API spec.
* For the new payload methods, I also update the verification of the executable data. For `newPayloadV2`, it does not currently ensure that cancun values are `nil`. Which could make it possible to submit cancun payloads through it.
* On `newPayloadV3` the same types of checks are added. All shanghai and cancun related fields in the executable data must be non-nil, with the addition that the timestamp is _only_ with cancun.
* Finally it updates a newly failing catalyst test to call the correct fcu and new payload methods depending on the fork.
This change switches from using the `Hasher` interface to add/query the bloomfilter to implementing it as methods.
This significantly reduces the allocations for Search and Rebloom.
This change makes use of uin256 to represent balance in state. It touches primarily upon statedb, stateobject and state processing, trying to avoid changes in transaction pools, core types, rpc and tracers.
This change simplifies the logic for indexing transactions and enhances the UX when transaction is not found by returning more information to users.
Transaction indexing is now considered as a part of the initial sync, and `eth.syncing` will thus be `true` if transaction indexing is not yet finished. API consumers can use the syncing status to determine if the node is ready to serve users.
The code to compute a versioned hash was duplicated a couple times, and also had a small
issue: if we ever change params.BlobTxHashVersion, it will most likely also cause changes
to the actual hash computation. So it's a bit useless to have this constant in params.
EIP-4844 adds a new transaction type for blobs. Users can submit such transactions via `eth_sendRawTransaction`. In this PR we refrain from adding support to `eth_sendTransaction` and in fact it will fail if the user passes in a blob hash.
However since the chain can handle such transactions it makes sense to allow simulating them. E.g. an L2 operator should be able to simulate submitting a rollup blob and updating the L2 state. Most methods that take in a transaction object should recognize blobs. The change boils down to adding `blobVersionedHashes` and `maxFeePerBlobGas` to `TransactionArgs`. In summary:
- `eth_sendTransaction`: will fail for blob txes
- `eth_signTransaction`: will fail for blob txes
The methods that sign txes does not, as of this PR, add support the for new EIP-4844 transaction types. Resuming the summary:
- `eth_sendRawTransaction`: can send blob txes
- `eth_fillTransaction`: will fill in a blob tx. Note: here we simply fill in normal transaction fields + possibly `maxFeePerBlobGas` when blobs are present. One can imagine a more elaborate set-up where users can submit blobs themselves and we fill in proofs and commitments and such. Left for future PRs if desired.
- `eth_call`: can simulate blob messages
- `eth_estimateGas`: blobs have no effect here. They have a separate unit of gas which is not tunable in the transaction.
In the tracing tests, the base fee was generally set to nil. This commit changes this to pass the proper base instead, and fixes the few tests which become broken by the change.
Given the discussions around deprecating pending (see #28623 or ethereum/execution-apis#495), we can move away from using the pending block internally, and use latest instead
* accounts, ethclient: minor tweaks on the new simulated backend
* ethclient/simulated: add an initial batch of gas options
* accounts, ethclient: remove mandatory gasLimit constructor param
* accounts, ethclient: minor option naming tweaks
* Fix broken badge in README.md
Replaced broken Github link with IPFS link for long-term storage.
* update go badge
Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com>
---------
Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com>
This is a rewrite of the 'simulated backend', an implementation of the ethclient interfaces
which is backed by a simulated blockchain. It was getting annoying to maintain the old
version of the simulated backend feature because there was a lot of code duplication with
the main client.
The new version is built using parts that we already have: an in-memory geth node instance
running in developer mode provides the chain, while the Go API is provided by ethclient.
A backwards-compatibility wrapper is provided, but the simulated backend has also moved to
a more sensible import path: github.com/ethereum/go-ethereum/ethclient/simulated
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
When managing geth, it is sometimes desirable to do a partial wipe; deleting state but retaining freezer data. A partial wipe can be somewhat tricky to accomplish.
This change implements the ability to perform partial wipe by making it possible to run geth removedb non-interactive, using command line options instead.
This pull request improves the condition to check if path state scheme is in use.
Originally, root node presence was used as the indicator if path scheme is used or not. However due to fact that root node will be deleted during the initial snap sync, this condition is no longer useful.
If PersistentStateID is present, it shows that we've already configured for path scheme.
Original problem was caused by #28595, where we made it so that as soon as we start to sync, the root of the disk layer is deleted. That is not wrong per se, but another part of the code uses the "presence of the root" as an init-check for the pathdb. And, since the init-check now failed, the code tried to re-initialize it which failed since a sync was already ongoing.
The total impact being: after a state-sync has begun, if the node for some reason is is shut down, it will refuse to start up again, with the error message: `Fatal: Failed to register the Ethereum service: waiting for sync.`.
This change also modifies how `geth removedb` works, so that the user is prompted for two things: `state data` and `ancient chain`. The former includes both the chaindb aswell as any state history stored in ancients.
---------
Co-authored-by: Martin HS <martin@swende.se>
Here we update the eth and snap protocol test suites with a new test chain,
created by the hivechain tool. The new test chain uses proof-of-stake. As such,
tests using PoW block propagation in the eth protocol are removed. The test suite
now connects to the node under test using the engine API in order to make it
accept transactions.
The snap protocol test suite has been rewritten to output test descriptions and
log requests more verbosely.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This is primarily to make lint work again on macOS 14. The older version of golangci-lint kept crashing.
Also included is a fix for a goroutine leak in the recently-introduced function MustRunCommandWithOutput.
This is the fix to issue #27483. A new hiddenBytes() is introduced to calculate the byte size of hidden items in the freezer table. When reporting the size of the freezer table, size of the hidden items will be subtracted from the total size.
---------
Co-authored-by: Yifan <Yifan Wang>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This change fixes a problem with our non-core binaries: evm, clef, bootnode.
First of all, they failed to convert from legacy loglevels 1 to 5, to the new slog loglevels -4 to 4.
Secondly, the logging was actually setup in the init phase, and then overridden in the main. This is not needed for evm, since it used the same flag name as the main geth verbosity. Better to let the flags/internal handle the logging init.
Certain flags, such as `--rpc.txfeecap` currently do not have an env-var auto-generated for them. This change adds three missing cli flag types to the auto env-var helper function to fix this.
* p2p/discover: add liveness check in collectTableNodes
* p2p/discover: fix test
* p2p/discover: rename to appendLiveNodes
* p2p/discover: add dedup logic back
* p2p/discover: simplify
* p2p/discover: fix issue found by test
This fixes a database corruption issue that could occur during state healing.
When sync is aborted while certain modifications were already committed, and a
reorg occurs, the database would contain incorrect trie nodes stored by path.
These nodes need to detected/deleted in order to obtain a complete and fully correct state
after state healing.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This change implements CommitteeChain which is a key component of the beacon light client. It is a passive data structure that can validate, hold and update a chain of beacon light sync committees and updates, starting from a checkpoint that proves the starting committee through a beacon block hash, header and corresponding state. Once synced to the current sync period, CommitteeChain can also validate signed beacon headers.
The dump after state-test didn't work, the problem was an error, "Already committed", which was silently ignored.
This change re-initialises the state, so the dumping works again.
This change
- Removes interface `log.Format`,
- Removes method `log.FormatFunc`,
- unexports `TerminalHandler.TerminalFormat` formatting methods (renamed to `TerminalHandler.format`)
- removes the notion of `log.Lazy` values
The lazy handler was useful in the old log package, since it
could defer the evaluation of costly attributes until later in the
log pipeline: thus, if the logging was done at 'Trace', we could
skip evaluation if logging only was set to 'Info'.
With the move to slog, this way of deferring evaluation is no longer
needed, since slog introduced 'Enabled': the caller can thus do
the evaluate-or-not decision at the callsite, which is much more
straight-forward than dealing with lazy reflect-based evaluation.
Also, lazy evaluation would not work with 'native' slog, as in, these
two statements would be evaluated differently:
```golang
log.Info("foo", "my lazy", lazyObj)
slog.Info("foo", "my lazy", lazyObj)
```
These changes improves the performance of the non-coloured terminal formatting, _quite a lot_.
```
name old time/op new time/op delta
TerminalHandler-8 10.2µs ±15% 5.4µs ± 9% -47.02% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
TerminalHandler-8 2.17kB ± 0% 0.40kB ± 0% -81.46% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
TerminalHandler-8 33.0 ± 0% 5.0 ± 0% -84.85% (p=0.008 n=5+5)
```
I tried to _somewhat_ organize the commits, but the it might still be a bit chaotic. Some core insights:
- The function `terminalHandler.Handl` uses a mutex, and writes all output immediately to 'upstream'. Thus, it can reuse a scratch-buffer every time.
- This buffer can be propagated internally, making all the internal formatters either write directly to it,
- OR, make use of the `tmp := buf.AvailableBuffer()` in some cases, where a byte buffer "extra capacity" can be temporarily used.
- The `slog` package uses `Attr` by value. It makes sense to minimize operating on them, since iterating / collecting into a new slice, iterating again etc causes copy-on-heap. Better to operate on them only once.
- If we want to do padding, it's better to copy from a constant `space`-buffer than to invoke `bytes.Repeat` every single time.
Add read locking of db lock around access to dirties cache in hashdb.Database to prevent
data race versus hashdb.Database.dereference which can modify the dirities map by deleting
an item.
Fixes#28541
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR replaces Geth's logger package (a fork of [log15](https://github.com/inconshreveable/log15)) with an implementation using slog, a logging library included as part of the Go standard library as of Go1.21.
Main changes are as follows:
* removes any log handlers that were unused in the Geth codebase.
* Json, logfmt, and terminal formatters are now slog handlers.
* Verbosity level constants are changed to match slog constant values. Internal translation is done to make this opaque to the user and backwards compatible with existing `--verbosity` and `--vmodule` options.
* `--log.backtraceat` and `--log.debug` are removed.
The external-facing API is largely the same as the existing Geth logger. Logger method signatures remain unchanged.
A small semantic difference is that a `Handler` can only be set once per `Logger` and not changed dynamically. This just means that a new logger must be instantiated every time the handler of the root logger is changed.
----
For users of the `go-ethereum/log` module. If you were using this module for your own project, you will need to change the initialization. If you previously did
```golang
log.Root().SetHandler(log.LvlFilterHandler(log.LvlInfo, log.StreamHandler(os.Stderr, log.TerminalFormat(true))))
```
You now instead need to do
```golang
log.SetDefault(log.NewLogger(log.NewTerminalHandlerWithLevel(os.Stderr, log.LevelInfo, true)))
```
See more about reasoning here: https://github.com/ethereum/go-ethereum/issues/28558#issuecomment-1820606613
* eth/gasestimator: early exit for plain transfer and error allowance
* core, eth/gasestimator: hard guess at a possible required gas
* internal/ethapi: update estimation tests with the error ratio
* eth/gasestimator: I hate you linter
* graphql: fix gas estimation test
---------
Co-authored-by: Oren <orenyomtov@users.noreply.github.com>
This change fixes two type-inconsistencies in the JS tracer:
- In most places we return byte arrays as a `Uint8Array` to the tracer. However it seems we missed doing the conversion for `ctx` fields which are passed to the tracer during `result`. They are passed as simple arrays. I think Uint8Arrays are more suitable and we should change this inconsistency. Note: this will be a breaking-change. But I believe the effect is small. If we look at our tracers we see that these fields (`ctx.from`, `ctx.to`, etc.) are used in 2 ways. Passed to `toHex` which takes both array or buffer. Or the length was measured which is the same for both types.
- The `slice` taking in `int, int` params versus `memory.slice` taking `int64, int64` params. I suggest changing `slice` types to `int64`. This should have no effect almost in any case.
There were several problems related to dumping state.
- If a preimage was missing, even if we had set the `OnlyWithAddresses` to `false`, to export them anyway, the way the mapping was constructed (using `common.Address` as key) made the entries get lost anyway. Concerns both state- and blockchain tests.
- Blockchain test execution was not configured to store preimages.
This changes makes it so that the block test executor takes a callback, just like the state test executor already does. This callback can be used to examine the post-execution state, e.g. to aid debugging of test failures.
* cmd, les, tests: remove light client code
This commit removes the light client (LES) code.
Since the merge the light client has been broken and
it is hard to maintain it alongside the normal client.
We decided it would be best to remove it for now and
maybe rework and reintroduce it in the future.
* cmd, eth: remove some more mentions of light mode
* cmd: re-add flags and mark as deprecated
* cmd: warn the user about deprecated flags
* eth: better error message
Adds a subcommand: `geth snapshot export-preimages`, to export preimages of every hash found during a snapshot enumeration: that is, it exports _only the active state_, and not _all_ preimages that have been used but are no longer part of the state.
This tool is needed for the verkle transition, in order to distribute the preimages needed for the conversion. Since only the 'active' preimages are exported, the output is shrunk from ~70GB to ~4GB.
The order of the output is the order used by the snapshot enumeration, which avoids database thrashing. However, it also means that storage-slot preimages are not deduplicated.
geth --dev can be used with an existing data directory and genesis block. Since
dev mode only works with PoS, we need to verify that the merge has happened.
Co-authored-by: Felix Lange <fjl@twurst.com>
It turns out that encoding json.RawMessage is slow because
package json basically parses the message again to ensure it is valid.
We can avoid the slowdown by encoding the entire RPC notification once,
which yields a 30% speedup.
* rpc: make subscription test faster
reduces time for TestClientSubscriptionChannelClose
from 25 sec to < 1 sec.
* trie: cache trie nodes for faster sanity check
This reduces the time spent on TestIncompleteSyncHash
from ~25s to ~16s.
* core/forkid: speed up validation test
This takes the validation test from > 5s to sub 1 sec
* core/state: improve snapshot test run
brings the time for TestSnapshotRandom from 13s down to 6s
* accounts/keystore: improve keyfile test
This removes some unnecessary waits and reduces the
runtime of TestUpdatedKeyfileContents from 5 to 3 seconds
* trie: remove resolver
* trie: only check ~5% of all trie nodes
This change adds a check to ensure that transactions added to the legacy pool are not treated as 'locals' if the global locals-management has been disabled.
This change makes the pool enforce the --txpool.pricelimit setting.
This PR verifies the accounts' storage as specified in a blockchain test's postState field
The expect-section, it does really only check that the test works. It's meant for the test-author to verify that "If the test does what it's supposed to, then the nonce of X should be 2, and the slot Y at Z should be 0x123.
This expect-section is not exhaustive (not full post-state)
It is also not auto-generated, but put there manually by the author.
We can still check it, as a test-sanity-check, in geth
* trie: use pooling of iterator states in iterator
The node iterator burns through a lot of memory while iterating a trie, and a lot of
that can be avoided by using a fairly small pool (max 40 items).
name old time/op new time/op delta
Iterator-8 6.22ms ± 3% 5.40ms ± 6% -13.18% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
Iterator-8 2.36MB ± 0% 1.67MB ± 0% -29.23% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
Iterator-8 37.0k ± 0% 29.8k ± 0% ~ (p=0.079 n=4+5)
* ethdb/memorydb: avoid one copying of key
By making the transformation from []byte to string at an earlier point,
we save an allocation which otherwise happens later on.
name old time/op new time/op delta
BatchAllocs-8 412µs ± 6% 382µs ± 2% -7.18% (p=0.016 n=5+4)
name old alloc/op new alloc/op delta
BatchAllocs-8 480kB ± 0% 490kB ± 0% +1.93% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
BatchAllocs-8 3.03k ± 0% 2.03k ± 0% -32.98% (p=0.008 n=5+5)
This PR moves our fuzzers from tests/fuzzers into whatever their respective 'native' package is.
The historical reason why they were placed in an external location, is that when they were based on go-fuzz, they could not be "hidden" via the _test.go prefix. So in order to shove them away from the go-ethereum "production code", they were put aside.
But now we've rewritten them to be based on golang testing, and thus can be brought back. I've left (in tests/) the ones that are not production (bls128381), require non-standard imports (secp requires btcec, bn256 requires gnark/google/cloudflare deps).
This PR also adds a fuzzer for precompiled contracts, because why not.
This PR utilizes a newly rewritten replacement for go-118-fuzz-build, namely gofuzz-shim, which utilises the inputs from the fuzzing engine better.
This change allows the creation of a genesis block for verkle testnets. This makes for a chunk of code that is easier to review and still touches many discussion points.
Currently, geth's will return `[]` for any `len(topics) > 4` log filter. The EVM only supports up to four logs, via LOG4 opcode, so larger criterias fail. This change makes the filter query exit early in those cases.
cockroachdb/pebble@422dce9 added Errorf to the Logger interface, this change makes it possible to compile geth with that version of pebble by adding the corresponding method to panicLogger.
* cmd/geth: more testcases for logging
This adds more edgecases around logging, particularly around handling of different types of nil-values
as concrete types and within interfaces.
Also adds tests with 'reserved' values which breaks json/logfmt formats. The json output is checked in,
but not actively used by any testcase at the moment.
* cmd/geth/testdata: remove timestamps
* core/vm: set basefee to 0 internally on eth_call
* core: nicer 0-basefee, make it work for blob fees too
* internal/ethapi: make tests a bit more complex
* core: fix blob fee checker
* core: make code a bit more readable
* core: fix some test error strings
* core/vm: Get rid of weird comment
* core: dict wrong typo
Currently, one can use the "withLogs" parameter to include logs in the
callTracer results, which allows the user to see at which trace level
was each log emitted.
This commit adds a position field to the logs which determine
the exact ordering of a call's logs and its subcalls. This would
be useful e.g. for explorers wishing to display the flow of execution.
Co-authored-by: jsvisa <delweng@gmail.com>
This change improves GenerateChain to support internal chain history access (ChainReader)
for the consensus engine and EVM.
GenerateChain takes a `parent` block and the number of blocks to create. With my changes,
the consensus engine and EVM can now access blocks from `parent` up to the block currently
being generated. This is required to make the BLOCKHASH instruction work, and also needed
to create real clique chains. Clique uses chain history to figure out if the current signer is in-turn,
for example.
I've also added some more accessors to BlockGen. These are helpful when creating transactions:
- g.Signer returns a signer instance for the current block
- g.Difficulty returns the current block difficulty
- g.Gas returns the remaining gas amount
Another fix in this commit concerns the receipts returned by GenerateChain. The receipts now
have properly derived fields (BlockHash, etc.) and should generally match what would be
returned by the RPC API.
This adds warning logs when the read does not match the expected count.
We can also remove the size limit since the function documentation explicitly states
that callers should limit the count.
a little copying is better than a little dependency
-- go proverb
We have this dependency on docker, a.k.a moby: a gigantic library, and we only need ~70 LOC,
so here I tried moving it inline instead.
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR is a bit in preparation for the slog work in #28187 .
Our current test re logging mostly test the internals, but we have no real end-to-end test of the logging output. This PR introduces a simple reexec-based log tester. This also relies upon a special mode in geth, which can be made to eject a set of predefined log messages (only available if the build-tag `integrationtests` is used
e.g. go run --tags=integrationtests ./cmd/geth --log.format terminal logtest
While working on this, I also noticed a quirk in the setup: when geth was configured to use a file output, then two separate handlers were used (one handler for the file, one handler for the console). Using two separate handlers means that two formatters are used, thus the formatting of any/all records happened twice. This PR changes the mechanism to use two separate io.Writers instead, which is both more optimal and fixes a bug which occurs due to a global statefulness in the formatter.
The String() version of BlockNumberOrHash uses decimal for all block numbers, including negative ones used to indicate labels. Switch to using BlockNumber.String() which encodes it correctly for use in the JSON-RPC API.
This PR removes panics from stacktrie (mostly), and makes the Update return errors instead. While adding tests for this, I also found that one case of possible corruption was not caught, which is now fixed.
This change closes https://github.com/ethereum/go-ethereum/issues/27730 . By using an iterator instead of a slice of transactions, we can better handle the case when an individual transaction (within an otherwise well-formed RLP-list) cannot be decoded.
Fixes a bug where the ethstats omits to report full block contents. This bug was a side-effect of https://github.com/ethereum/go-ethereum/pull/26777, where `CurrentBlock` was changed to return a header instead of a block, leading to a failed type assertion.
A goroutine is used to manage the lifetime of subscriptions managed by
resubscriptions. When the subscription ends with no error, the resub
goroutine ends as well. However, the resub goroutine needs to live
long enough to read from the unsub channel. Otheriwse, an Unsubscribe
call deadlocks when writing to the unsub channel.
This is fixed by adding a buffer to the unsub channel.
* api/bind: Add CallOpts.BlockHash to allow calling contracts at a specific block hash.
* ethclient: Add BalanceAtHash, NonceAtHash and StorageAtHash functions
This change enhances the stacktrie constructor by introducing an option struct. It also simplifies the `Hash` and `Commit` operations, getting rid of the special handling round root node.
# see https://golangci-lint.run/usage/linters/#revive for supported rules
rules:
- name:receiver-naming
severity:warning
disabled:false
exclude:
- ''
exclusions:
generated:lax
presets:
- comments
- common-false-positives
- legacy
- std-error-handling
rules:
- linters:
- deadcode
- staticcheck
path:crypto/bn256/cloudflare/optate.go
- linters:
- revive
path:crypto/bn256/
- path:cmd/utils/flags.go
text:"SA1019: cfg.TxLookupLimit is deprecated: use 'TransactionHistory' instead."
- path:cmd/utils/flags.go
text:"SA1019: ethconfig.Defaults.TxLookupLimit is deprecated: use 'TransactionHistory' instead."
- path:internal/build/pgp.go
text: 'SA1019:"golang.org/x/crypto/openpgp"is deprecated:this package is unmaintained except for security fixes.'
- path:core/vm/contracts.go
text: 'SA1019:"golang.org/x/crypto/ripemd160"is deprecated:RIPEMD-160 is a legacy hash and should not be used for new applications.'
- path:accounts/usbwallet/trezor.go
text: 'SA1019:"github.com/golang/protobuf/proto"is deprecated:Use the "google.golang.org/protobuf/proto" package instead.'
- path:accounts/usbwallet/trezor/
text: 'SA1019:"github.com/golang/protobuf/proto"is deprecated:Use the "google.golang.org/protobuf/proto" package instead.'
exclude:
- 'SA1019: event.TypeMux is deprecated:use Feed'
- 'SA1019:strings.Title is deprecated'
- 'SA1019: strings.Title has been deprecated since Go 1.18 and an alternative has been available since Go 1.0:The rule Title uses for word boundaries does not handle Unicode punctuation properly. Use golang.org/x/text/cases instead.'
- 'SA1029:should not use built-in type string as key for value'
- path:(.+)\.go$
text: 'SA1019: event.TypeMux is deprecated:use Feed'
- path:(.+)\.go$
text: 'SA1019:strings.Title is deprecated'
- path:(.+)\.go$
text: 'SA1019: strings.Title has been deprecated since Go 1.18 and an alternative has been available since Go 1.0:The rule Title uses for word boundaries does not handle Unicode punctuation properly. Use golang.org/x/text/cases instead.'
- path:(.+)\.go$
text: 'SA1029:should not use built-in type string as key for value'
- **Keep changes minimal and focused.** Only modify code directly related to the task at hand. Do not refactor unrelated code, rename existing variables or functions for style, or bundle unrelated fixes into the same commit or PR.
- **Do not add, remove, or update dependencies** unless the task explicitly requires it.
## Pre-Commit Checklist
Before every commit, run **all** of the following checks and ensure they pass:
### 1. Formatting
Before committing, always run `gofmt` and `goimports` on all modified files:
```sh
gofmt -w <modifiedfiles>
goimports -w <modifiedfiles>
```
### 2. Build All Commands
Verify that all tools compile successfully:
```sh
make all
```
This builds all executables under `cmd/`, including `keeper` which has special build requirements.
### 3. Tests
While iterating during development, use `-short` for faster feedback:
```sh
go run ./build/ci.go test -short
```
Before committing, run the full test suite **without**`-short` to ensure all tests pass, including the Ethereum execution-spec tests and all state/block test permutations:
```sh
go run ./build/ci.go test
```
### 4. Linting
```sh
go run ./build/ci.go lint
```
This runs additional style checks. Fix any issues before committing.
### 5. Generated Code
```sh
go run ./build/ci.go check_generate
```
Ensures that all generated files (e.g., `gen_*.go`) are up to date. If this fails, first install the required code generators by running `make devtools`, then run the appropriate `go generate` commands and include the updated files in your commit.
### 6. Dependency Hygiene
```sh
go run ./build/ci.go check_baddeps
```
Verifies that no forbidden dependencies have been introduced.
## What to include in commits
Do not commit binaries, whether they are produced by the main build or byproducts of investigations.
## Commit Message Format
Commit messages must be prefixed with the package(s) they modify, followed by a short lowercase description:
```
<package(s)>: description
```
Examples:
- `core/vm: fix stack overflow in PUSH instruction`
- `eth, rpc: make trace configs optional`
- `cmd/geth: add new flag for sync mode`
Use comma-separated package names when multiple areas are affected. Keep the description concise.
## Pull Request Title Format
PR titles follow the same convention as commit messages:
```
<listofmodifiedpaths>: description
```
Examples:
- `core/vm: fix stack overflow in PUSH instruction`
- `trie/archiver: streaming subtree archival to fix OOM`
Use the top-level package paths, comma-separated if multiple areas are affected. Only mention the directories with functional changes, interface changes that trickle all over the codebase should not generate an exhaustive list. The description should be a short, lowercase summary of the change.
Automated builds are available for stable releases and the unstable master branch. Binary
archives are published at https://geth.ethereum.org/downloads/.
@ -16,7 +17,7 @@ archives are published at https://geth.ethereum.org/downloads/.
For prerequisites and detailed build instructions please read the [Installation Instructions](https://geth.ethereum.org/docs/getting-started/installing-geth).
Building `geth` requires both a Go (version 1.19 or later) and a C compiler. You can install
Building `geth` requires both a Go (version 1.23 or later) and a C compiler. You can install
them using your favourite package manager. Once the dependencies are installed, run
```shell
@ -40,7 +41,6 @@ directory.
| `clef` | Stand-alone signing tool, which can be used as a backend signer for `geth`. |
| `devp2p` | Utilities to interact with nodes on the networking layer, without running a full blockchain. |
| `abigen` | Source code generator to convert Ethereum contract definitions into easy-to-use, compile-time type-safe Go packages. It operates on plain [Ethereum contract ABIs](https://docs.soliditylang.org/en/develop/abi-spec.html) with expanded functionality if the contract bytecode is also available. However, it also accepts Solidity source files, making development much more streamlined. Please see our [Native DApps](https://geth.ethereum.org/docs/developers/dapp-developer/native-bindings) page for details. |
| `bootnode` | Stripped down version of our Ethereum client implementation that only takes part in the network node discovery protocol, but does not run any of the higher level application protocols. It can be used as a lightweight bootstrap node to aid in finding peers in private networks. |
| `evm` | Developer utility version of the EVM (Ethereum Virtual Machine) that is capable of running bytecode snippets within a configurable environment and execution mode. Its purpose is to allow isolated, fine-grained debugging of EVM opcodes (e.g. `evm --code 60ff60ff --debug run`). |
| `rlpdump` | Developer utility tool to convert binary RLP ([Recursive Length Prefix](https://ethereum.org/en/developers/docs/data-structures-and-encoding/rlp)) dumps (data encoding used by the Ethereum protocol both network as well as consensus wise) to user-friendlier hierarchical representation (e.g. `rlpdump --hex CE0183FFFFFFC4C304050583616263`). |
@ -55,14 +55,14 @@ on how you can run your own `geth` instance.
Minimum:
* CPU with 2+ cores
* 4GB RAM
* CPU with 4+ cores
* 8GB RAM
* 1TB free storage space to sync the Mainnet
* 8 MBit/sec download Internet service
Recommended:
* Fast CPU with 4+ cores
* Fast CPU with 8+ cores
* 16GB+ RAM
* High-performance SSD with at least 1TB of free space
* 25+ MBit/sec download Internet service
@ -89,7 +89,7 @@ This command will:
This tool is optional and if you leave it out you can always attach it to an already running
`geth` instance with `geth attach`.
### A Full node on the Görli test network
### A Full node on the Holesky test network
Transitioning towards developers, if you'd like to play around with creating Ethereum
contracts, you almost certainly would like to do that without any real money involved until
@ -98,23 +98,23 @@ network, you want to join the **test** network with your node, which is fully eq
the main network, but with play-Ether only.
```shell
$ geth --goerli console
$ geth --holesky console
```
The `console` subcommand has the same meaning as above and is equally
useful on the testnet too.
Specifying the `--goerli` flag, however, will reconfigure your `geth` instance a bit:
Specifying the `--holesky` flag, however, will reconfigure your `geth` instance a bit:
* Instead of connecting to the main Ethereum network, the client will connect to the Görli
* Instead of connecting to the main Ethereum network, the client will connect to the Holesky
test network, which uses different P2P bootnodes, different network IDs and genesis
states.
* Instead of using the default data directory (`~/.ethereum` on Linux for example), `geth`
will nest itself one level deeper into a `goerli` subfolder (`~/.ethereum/goerli` on
will nest itself one level deeper into a `holesky` subfolder (`~/.ethereum/holesky` on
Linux). Note, on OSX and Linux this also means that attaching to a running testnet node
requires the use of a custom endpoint since `geth attach` will try to attach to a
production node endpoint by default, e.g.,
`geth attach <datadir>/goerli/geth.ipc`. Windows users are not affected by
`geth attach <datadir>/holesky/geth.ipc`. Windows users are not affected by
this.
*Note: Although some internal protective measures prevent transactions from
@ -139,8 +139,6 @@ export your existing configuration:
$ geth --your-favourite-flags dumpconfig
```
*Note: This works only with `geth` v1.6.0 and above.*
#### Docker quick start
One of the quickest ways to get Ethereum up and running on your machine is by using
@ -165,7 +163,7 @@ accessible from the outside.
As a developer, sooner rather than later you'll want to start interacting with `geth` and the
Ethereum network via your own programs and not manually through the console. To aid
this, `geth` has built-in support for a JSON-RPC based APIs ([standard APIs](https://ethereum.github.io/execution-apis/api-documentation/)
this, `geth` has built-in support for a JSON-RPC based APIs ([standard APIs](https://ethereum.org/en/developers/docs/apis/json-rpc/)
and [`geth` specific APIs](https://geth.ethereum.org/docs/interacting-with-geth/rpc)).
These can be exposed via HTTP, WebSockets and IPC (UNIX sockets on UNIX based
platforms, and named pipes on Windows).
@ -181,14 +179,13 @@ HTTP based JSON-RPC API options:
* `--http.addr` HTTP-RPC server listening interface (default: `localhost`)
* `--http.port` HTTP-RPC server listening port (default: `8545`)
* `--http.api` API's offered over the HTTP-RPC interface (default: `eth,net,web3`)
* `--http.corsdomain` Comma separated list of domains from which to accept crossorigin requests (browser enforced)
* `--http.corsdomain` Comma separated list of domains from which to accept cross-origin requests (browser enforced)
* `--ws` Enable the WS-RPC server
* `--ws.addr` WS-RPC server listening interface (default: `localhost`)
* `--ws.port` WS-RPC server listening port (default: `8546`)
* `--ws.api` API's offered over the WS-RPC interface (default: `eth,net,web3`)
* `--ws.origins` Origins from which to accept WebSocket requests
* `--ipcdisable` Disable the IPC-RPC server
* `--ipcapi` API's offered over the IPC-RPC interface (default: `admin,debug,eth,miner,net,personal,txpool,web3`)
* `--ipcpath` Filename for IPC socket/pipe within the datadir (explicit paths escape it)
You'll need to use your own programming environments' capabilities (libraries, tools, etc) to
@ -207,113 +204,14 @@ APIs!**
Maintaining your own private network is more involved as a lot of configurations taken for
granted in the official networks need to be manually set up.
#### Defining the private genesis state
Unfortunately since [the Merge](https://ethereum.org/en/roadmap/merge/) it is no longer possible
to easily set up a network of geth nodes without also setting up a corresponding beacon chain.
First, you'll need to create the genesis state of your networks, which all nodes need to be
aware of and agree upon. This consists of a small JSON file (e.g. call it `genesis.json`):
There are three different solutions depending on your use case:
Which will start mining blocks and transactions on a single CPU thread, crediting all
proceedings to the account specified by `--miner.etherbase`. You can further tune the mining
by changing the default gas limit blocks converge to (`--miner.targetgaslimit`) and the price
transactions are accepted at (`--miner.gasprice`).
* If you are looking for a simple way to test smart contracts from go in your CI, you can use the [Simulated Backend](https://geth.ethereum.org/docs/developers/dapp-developer/native-bindings#blockchain-simulator).
* If you want a convenient single node environment for testing, you can use our [Dev Mode](https://geth.ethereum.org/docs/developers/dapp-developer/dev-mode).
* If you are looking for a multiple node test network, you can set one up quite easily with [Kurtosis](https://geth.ethereum.org/docs/fundamentals/kurtosis).
@ -21,7 +21,6 @@ Audit reports are published in the `docs` folder: https://github.com/ethereum/go
To find out how to disclose a vulnerability in Ethereum visit [https://bounty.ethereum.org](https://bounty.ethereum.org) or email bounty@ethereum.org. Please read the [disclosure page](https://github.com/ethereum/go-ethereum/security/advisories?state=published) for more information about publicly disclosed security vulnerabilities.
Use the built-in `geth version-check` feature to check whether the software is affected by any known vulnerability. This command will fetch the latest [`vulnerabilities.json`](https://geth.ethereum.org/docs/vulnerabilities/vulnerabilities.json) file which contains known security vulnerabilities concerning `geth`, and cross-check the data against its own version number.
The following key may be used to communicate sensitive information to developers.
//go:generate go run github.com/ethereum/go-ethereum/cmd/abigen -v2 -combined-json internal/contracts/db/combined-abi.json -type DBStats -pkg db -out internal/contracts/db/bindings.go
//go:generate go run github.com/ethereum/go-ethereum/cmd/abigen -v2 -combined-json internal/contracts/events/combined-abi.json -type C -pkg events -out internal/contracts/events/bindings.go
//go:generate go run github.com/ethereum/go-ethereum/cmd/abigen -v2 -combined-json internal/contracts/nested_libraries/combined-abi.json -type C1 -pkg nested_libraries -out internal/contracts/nested_libraries/bindings.go
//go:generate go run github.com/ethereum/go-ethereum/cmd/abigen -v2 -combined-json internal/contracts/solc_errors/combined-abi.json -type C -pkg solc_errors -out internal/contracts/solc_errors/bindings.go
//go:generate go run github.com/ethereum/go-ethereum/cmd/abigen -v2 -combined-json internal/contracts/uint256arrayreturn/combined-abi.json -type C -pkg uint256arrayreturn -out internal/contracts/uint256arrayreturn/bindings.go
// TestBindingGeneration tests that re-running generation of bindings does not result in
